Windows 7: Problem with getting my KWorld PC150-u Tv Tuner Card to work in MCE

I have a KWorld PC150-u Tv Tuner that came with a prepackaged Arclight Total Media install that scans the TV tuner for signals to display and it works just fine. But the Kworld box, microsoft website and various other forums like newegg say that the card is Media Center compatable

I have flashed the drivers
Unintalled the card from my OS(not physically)
Configured the tuner in Media Center

All to no end. MCE says that one of the tuners in non functioning and the other two are, The ATSC and the Clear QAM. The QAM tuner is functional but shouldnt be active in media center as there is no hook up going to it but it trys to configure it any way. Then the configuration goes on to the ATSC tuner which it also configures properly and detects channels and most channels have a medium to high signal strength BUT when i go to watch live tv every channel says there is currently no TV signal detected for this channel. The channel may be temporarily off the air. Try again later.

Has anyone run into this problem and or found a solution