Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: copy protection message using same TV

06 Jun 2012   #1
mhubel

Windows 7 Ultimate 32 bit
 
 
copy protection message using same TV

I have windows media center set up with a cable card and a Hauppauge DCR-2650. It frequently generates a message saying the program is copy protected and must be viewed on the same TV. It is only connected to one Sony TV by a HDMI cable. Of course most of the time, the power to the TV is off when a scheduled recording is being done.

The computer is running Windows 7 Ultimate.

The channels being recorded are local broadcast channels (available off the air) but are being viewed through Verizon FIOS.

Is there any solution for this?


My System SpecsSystem Spec
.

11 Jun 2012   #2
mhubel

Windows 7 Ultimate 32 bit
 
 
fourced solution

As it seemed there was no one with a solution, I took the ultimate approach. Reload everything on a re-formatted disk. This time things worked differently. Everything appears to work. I even have the DCR-2650 apparently always connecting when the computer comes out of sleep by powering the DCR-2650 when the computer goes into sleep.

I think the fact that a hauppauge 1600 had been installed on this system caused some problems when the DCR-2650 was installed.
My System SpecsSystem Spec
Reply

 copy protection message using same TV




Thread Tools





Similar help and support threads
Thread Forum
illegal copy of windows message
i keep getting illegal copy of windows message i tried to do microsoft update to fix also ran spyware nothing fixes it it is a legal copy that has been on laptop since new i even called microsoft but still get message now on 2 computers tosiba win 7 ultimate computer im even getting it on my win...
Windows Updates & Activation
"save the changes” message after removing the protection from workbook
Some time ago I protected the Excel 2010 file from the path File > Protect workbook > Encrypt with password and gave it a password. Now that I removed that password via below method: Open the workbook and use Save As In the lower right of the file window will be "Tools" Choose "General...
Microsoft Office
Why Trustport total protection will prompt error message??
Why Trustport total protection will prompt error message "Trustport core service is not running or other fatal error has occurred" and "you can wait trustport core service starts or you can close application"? Have any solution??
Software
Message about non genuine copy of windows
After installing some windows updates I keep getting the same message that my copy of windows is not genuine. I recently sent it back to manufacturer for some work. Help would be greatly appreciated. Diagnostic Report (1.9.0027.0): ----------------------------------------- Windows Validation...
Windows Updates & Activation
Need copy protection for programmed software
Hello people, I have created a game for windows7 platform and want to put it on the internet and on CD for a small fee. I was wondering if anyone knows a good copy protection mechanism which i can use. I already found a few anti copy protection mechanisms, does anyone know these systems, or...
Software
Understanding HDCP -- Blu-Ray copy protection and its h
Computers that play Blu-Ray discs have to deal with High-Definition Copy Protection (HDCP). This is a system involving both software but also hardware chips that are placed in equipment that might be used to play Blu-Ray content. Because the manufacturers of blue Ray discs do not want unauthorized...
Music, Pictures & Video

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 10:32.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App