Which Conversion Format To DVD (From Video_Ts Files?

Page 1 of 2 12 LastLast

  1. Posts : 30
    windows 7, 64 bit, home premium
       #1

    Which Conversion Format To DVD (From Video_Ts Files?


    Hello,
    I am seeking some information regarding the above header.
    1. I removed content off a DVD and processed that content in the form of a Video_Ts file.
    2. To burn to DVD, should I use, MPEG, MP3, MP4, or HTML5, "Speaking of the conversion from the Video_Ts files?

    I tried converting from Video_Ts to MPEG, but I lost 10 seconds in the beginning. I then converted the Video_Ts files to MP4 and found that the entire video was captured, without any loss in time; i.e. (10 seconds).

    These videos were originally downloaded in FLV and Mp4. My question is simply put (I think), which format should I use to convert Video_Ts files to? Apparently, MPEG loses 10 seconds off the start. MP4 works well. As to the other formats, MP3 or HTML5, would they suffice as well.

    Also, when burning to DVD, will the format used be integral to the quality on the DVD? In other words, which format would be the best? Naturally, MPEG is out, so to say.

    Any information would truly be appreciated. Thank you very much. This is trivial in nature, but I'm seeking an answer.
      My Computer


  2. Posts : 166
    Windows
       #2

    I'm not entirely sure what you're asking, but I'll give it a shot. You can pull a .VOB file out of the video_ts directory and change the file extension to .MPG. Then you can edit it or import it into a DVD Authoring program.

    You don't change the format of the VOB file or convert if you want to burn it to another DVD. DVD by definition and standard is an MPEG Layer 2 video file. If you are downloading FLV or MP4 files and want to burn them to a DVD, they need to conform to the DVD standard for your region - resolution, audio encoding, FPS, etc. Many Authoring programs have presets to do this for you.
      My Computer


  3. Posts : 30
    windows 7, 64 bit, home premium
    Thread Starter
       #3

    Thank you very much Fred. I'm using Freemake which is very robust and works quite well. You have provided some extra information for me. However, it really is not an issue. I'll try to address the question in a clearer light.
    1. After you download a video from YouTube, (Copyright Free), lets say in FLV, can I convert to MP4, then burn to DVD? or would it be better to burn FLV to DVD? Naturally, Freemake converts all videos as to burn to DVD, regardless of the format. A reply would be most welcome. Thank you very much.
      My Computer


  4. Posts : 166
    Windows
       #4

    Ok, I gotcha. If the end result is you want to make a DVD that you can play in any DVD player and Freemake can create DVDs (called DVD Authoring), then let Freemake convert the FLV file while it's creating the DVD. In other words, don't convert the FLV to MP4, then use the MP4 to make the DVD. That way you aren't encoding and converting the original video file twice. It's like recording a record to a cassette then recording the cassette to CD. You'll save a step, plus you won't muddy up the quality any more.
      My Computer


  5. Posts : 30
    windows 7, 64 bit, home premium
    Thread Starter
       #5

    Exactly Fred. I truly thank you. This is the answer I've been seeking for a couple of days. I even went to Videomaker.com and they made a big deal about it. Apparenty Fred, you are more knowledgeable than they and surely more courteous.
    Seeing that you answered my question, I just would like to know why not to convert to MP4 from FLV prior to burning to DVD. You make mention of "muddying" up the video. The extra steps I don't mind. The only reason why I wish to convert to MP4 from FLV, is only to recognize the file quicker (image), rather than tag. Would there really be a significant difference in quality if I followed your later point, which you really do not advise; due to quality. Again Fred, thank you for your time and consideration. You have been most helpful and I truly appreciate your assistance.
      My Computer


  6. Posts : 166
    Windows
       #6

    You're welcome Synoptic, happy to help. I just realized you're in RI. I'm about 2 towns away from you, LOL! Without getting too technical, if you convert an FLV file to MP4, there are a lot of settings which get changed from the original video file to the MP4, such as: The pixel size - either enlarged or reduced, video compression, the audio format and compression, the video coding in how each pixel is reproduced and displayed, etc. Each time you convert the file you change it to match the new file type. The more conversions you do, the more likely the video is to be less clear when watching it. Like making a photo copy of a photo copy. That's the best explanation I can think of.
      My Computer


  7. Posts : 30
    windows 7, 64 bit, home premium
    Thread Starter
       #7

    Thank you Fred, you nailed it. By the way, you are correct in your summation. I just tested by burning to DVD, using original format: 1. From FLV directly to DVD.
    2. From FLV, convert to MP4, then burn to DVD.
    3. From Video_Ts to MP4, then to DVD.
    I've tried three examples, and I really see not much of a difference if any. Many people make mention that each and every time you convert, you degrade video. This very well may hold true, as you clearly point out. Again, from three formats, (listed above), I really cannot see much of a difference in audio or video. Naturally, it's not 1080P but its extremely close to 480P, which suits me fine. For the professional, which I'm not, this surely would not suffice.
    In any event Fred, you must be next door, or clear across the country. Your help is truly appreciated and you have elaborated in true quality.
      My Computer


  8. Posts : 166
    Windows
       #8

    If you aren't noticing any difference in the video or audio quality, then choose whichever method works for you. You're right, on a 480p TV, you're less likely to see a big difference in re-encoding files. If you do, then you can go back and try a different method. Glad the explanation helped!
      My Computer


  9. Posts : 30
    windows 7, 64 bit, home premium
    Thread Starter
       #9

    Thank you very much Fred. Actually a very , very mild difference if I convert more than once; barely noticeable.
    Don't mean to bother you Fred but if I download a video from YouTube or any other video site, which format should I download in: 1. MP4-720P, 2. FLV 480p, HD 1080P. This would be in conjunction for burning to DVD. Again Fred, you have answered my questions. Sorry to bother you. A reply is most appreciated.
      My Computer


  10. Posts : 12,012
    Windows 7 Home Premium SP1, 64-bit
       #10

    What add-on tool are you using to allow you to download the Youtube videos?

    I'd like to generally download the best possible quality, but I don't have a choice for anything above 360.

    MP4 360 has the best quality of the choices I am offered. FLV is not good in my experience.
      My Computer


 
Page 1 of 2 12 LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 08:10.
Find Us