Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Paint

27 Jan 2009   #1
AGlobalThreatsK

7 x64 + XP Pro x86
 
 
Paint

In the old paint versions you can go to the Image menu and change the Attributes, which allows you to adjust the picture by the pixel dimensions. Basically like cropping but you can enter in the exact dimensions of the picture in pixels that you want. Is there any way to do this with the new paint? I can't seem to find it.

TIA,
Craig


My System SpecsSystem Spec
.

27 Jan 2009   #2
Mark

Windows 7 Ultimate Vista Ultimate x64
 
 

You can just grab the side of the page on one of the little tabs and change the size to whatever you want and it gives the size of your page at the bottom in the status bar.
My System SpecsSystem Spec
27 Jan 2009   #3
AGlobalThreatsK

7 x64 + XP Pro x86
 
 

But is there any way to do it like before with the attributes? I used to chop off borders and center the picture that way. I would do that so the main object in the picture would be bigger and take up more of the image. Doing it the way you're describing is just resizing the picture, the new paint has that feature also as resize/skew for the % increase/decrease. I want to be able to chop it to a certain # of pixels like before, flip it around and chop the other side, etc., until I get the picture exactly how I want.

If I replace the windows7 mspaint with the vista64 mspaint will everything work ok?
My System SpecsSystem Spec
.


27 Jan 2009   #4
Mark

Windows 7 Ultimate Vista Ultimate x64
 
 

No it's not what I was describing, I was talking about the page size and i can see all the other options as well like resize and skew which you do by selecting the whole image or parts of it, but if you don't select anything and zoom out a little you will see tabs on the outside of the page which allow you to change the page size.

answer to you last question is no it doesn't work and if you want an alternative why not try Paint.net, it's free and it is very good.
My System SpecsSystem Spec
27 Jan 2009   #5
AGlobalThreatsK

7 x64 + XP Pro x86
 
 

This will take some getting used to, I appreciate the help.
My System SpecsSystem Spec
27 Jan 2009   #6
Mark

Windows 7 Ultimate Vista Ultimate x64
 
 

Your welcome, but do try paint.net, I find it very useful and I made my sig with it.
My System SpecsSystem Spec
28 Jan 2009   #7
AGlobalThreatsK

7 x64 + XP Pro x86
 
 

Yea I was already using it and it seemed to work great, it's just like paint with 100x the features. Like I said it will just take some time to get used to :P
My System SpecsSystem Spec
28 Jan 2009   #8
garbanzo

7600 x86
 
 

you can still do this in the new paint, it's just called Properties rather than Attributes. reach the Properties dialog from the small, shiny blue button on the far left of the ribbon.



My System SpecsSystem Spec
28 Jan 2009   #9
AGlobalThreatsK

7 x64 + XP Pro x86
 
 

Yay! ty

For a minute there I lost hope.
My System SpecsSystem Spec
06 Oct 2013   #10
Scarletrose44

Windows vista
 
 

I know this post is old but since there wasn't a real answer on how to find it I thought I should post this.

When in Paint follow these directions:

Click the Paint menu drop down arrow ---> Properties ---> Attributes is at the bottom - enter width and height and there you go.

I hope this helps
My System SpecsSystem Spec
Reply

 Paint




Thread Tools





Similar help and support threads
Thread Forum
Win 7 paint
Hello, I probably have a simple problem. I'm trying to draw an arrow onto a photograph using the arrow "shape" and then fill it in so that it is solid using the bucket tool. It doesn't work. I've tried saving as a bitmap but that didn't work either. Any help would be appreciated Thanks. JB
Software
MS Paint help.
I'm here from a Google search on MS Paint. The old Paint, not Paint.net, and I have some questions. If I'm at the wrong forum, tell me, and tell me where to find the right forum.:p
General Discussion
Error 1722 (and Paint.net Error 1603) Can't Uninstall/Update Paint.net
Hi all, I'm sure glad there are forums out there because I'm at a loss on this thus far. :cry: Paint.net has an update available to 3.5.6 from 3.5.5. When I go to install the new version part of that process is uninstalling the old version. It seems to error out at this point and gives me...
Software
MS Paint
I let my daughters play with paint on my computer and haven´t had a problem until now they won´t leave me alone about fixing it. The problem is that when you try to paint, what you are painting or the pen mark is not under the cursor but below and to the right of the cursor about 4 in. I have been...
Software
Ms paint
In windows 7 prof. (64 bit) I do not have a place to choose to insert the printscreen. there are two choices. It allows me to go to a file and get it. It does not allow me to paste the clipboard. anyone know how to do this? I am thinking that perhaps the printscreen key itself needs to be...
Software
How's This For A Paint Job
Good Art
Chillout Room

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 19:35.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App