Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: AP working, but can't connect to device

22 Aug 2010   #1

Windows Vista
AP working, but can't connect to device

I'm using a D-Link DIR-655 as an AP after a Cisco router. It works and everything is configured. However, I can't seem to log into the device admin. I can get a list of all devices connected by IP from the Cisco box, but nothing comes up when I type the IP's into a browser. Tried http and https. Any ideas? This is driving me crazy.

Update: It is just a bridge, so assigned DHCP addresses are from the Cisco router.

My System SpecsSystem Spec
23 Aug 2010   #2

Windows Vista

Fixed. Finally guessed the IP manually.
My System SpecsSystem Spec

 AP working, but can't connect to device

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Similar help and support threads
Thread Forum
Your device can perform faster when you connect it to a usb3 device
Hi all, i need your advise pls. I have a Samsung series 7 laptop with 2 usb3 ports and 2 usb 2.0 ports. On the device manager i can see the installed driver Intel usb 3.0 root hub and intel usb 3.0 extensive host controller. I also have purchased a Samsung 64GB sdxc card SDXC UHS...
Hardware & Devices
How to connect a ethernet device?
I have a device connected through ethernet. i need to use it through ethernet but have no idea how. In the files of the software of the device is a network.ini file wich shows a adress i can chance. but i have no idea what the adress is i need to set. i can also connect the device over USB and...
Network & Sharing
DVD (not working) not found in Device manager, 1 USB port not working
I have a HP dv6910us Pavilion and the DVD is not listed in Device Manager. DVD Tray opens and light comes on but does not play DVD. 1st USB port on left side gets - USB Device Not Recognized.One under it works and one on the right side works. OS Windows7 Ultimate. It is running kind of screwy so...
Hardware & Devices
Stumped - Add Device or Remove Device Not Working
HI I have searched high and low for a resolution. OK. When I went to add a new Bluetooth keyboard (Control Panel>Add Devices). When pressing Add Device, nothing happens. I have two Bluetooth devices already installed, are listed under "Devices" are "found" and work fine.
Hardware & Devices
Device connect/failed to connect
Every few minutes, I get a fraction of a second delay while some device in the system tries to connect and then another second when I get the failed to connect. I set up the sounds so that I know that it is the device connect and failed to connect. Is there some way I can identify the device that...
Hardware & Devices
How do I get Stereo mix working when usb device is default device?
Hi guys, so I did some tweaking around in Sounds and Realtek HD Audio Manager, and I finally got stereo mix working. There's only one catch. It only picks it up if my default device is Reaktek HD Speakers. I tried setting my USB headset as the default device, since I never use my monitor's built in...
Sound & Audio

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 01:06.

Twitter Facebook Google+

Windows 7 Forums

Seven Forums Android App Seven Forums IOS App