Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: IT USB Remote NDIS Network Problem- Cannot connect to host computer?


13 Dec 2010   #1

windows 7 Ultimate x64
 
 
IT USB Remote NDIS Network Problem- Cannot connect to host computer?

Okay, so here is the kick. I have a rather old Aztech Modem. Model is Aztech DSL600EU. Anyways this modem has a USB and Ethernet port. Okay, so I've been using it recently on the Ethernet wire, until recently I got a new com. So now I want both coms to work on the internet.

Okay, so I started with some driver problem. In the end I fixed it. And then this is my second problem. All my lights on the modem light up including the USB light. I can surf the internet on my new com but can't on my old one. (New one is connected via Ethernet Cable and Old com is via USB cable) Okay, so this is the main problem for me.

However, when I switch cables. (New one connects to USB and Old one to Ethernet) The old one is able to function with internet. On my new one, it doesn't work. So now I've switched back again and after fondling with the wires and stuff. I finally get a connection but this connection is disabled (Old com). I tried to enable it but then it says 'enabling'.....'Connection Failed!'.

After doing furthur look through, I tried setting up an ICS, however my windows 7 settings doesn't have the 'sharing' tab under the local network properties. And also tried 'bridge connections', however I have only 1 network or so they say.

So, the question at the end of the day is. How do I get my computer on the USB end of the router to function with internet?

If you can solve this, seriously thanks, cause I've been researching this for 2 days straight and still can't come with a solution.

My System SpecsSystem Spec
.

13 Dec 2010   #2

Windows 7 Enterprise (x64); Windows Server 2008 R2 (x64)
 
 

If I understand this correctly you are connecting to the USB and Ethernet on your cable modem?? If so you cannot use both at the same time on most modems. It is one or the other. That may be the problem. -WS
My System SpecsSystem Spec
13 Dec 2010   #3

windows 7 Ultimate x64
 
 

Hmmm...I see. But I used to have a laptop (Pretty old one) And it worked perfectly when I connected both together......last time, about 2 years ago.....
My System SpecsSystem Spec
.


13 Dec 2010   #4

Windows 7 Enterprise (x64); Windows Server 2008 R2 (x64)
 
 

Quote   Quote: Originally Posted by hoihoisoi View Post
Hmmm...I see. But I used to have a laptop (Pretty old one) And it worked perfectly when I connected both together......last time, about 2 years ago.....
Then it should/could work. As I said most cable modems do not support both. However many cable companies update the modems on their network, flash firmware and/or configuration, to meet their needs. Maybe the modem took an update in the last 2 years and now that does not work??? You can google the user manual for your modem and see what it says. I know when I have setup modems in the past the user manual will state clearly you cannot use both. -WS
My System SpecsSystem Spec
13 Dec 2010   #5

windows 7 Ultimate x64
 
 

I see....I see......just rang the service provider and they told me the same thing. Hmm...but I wonder how did I get that laptop to work 2 years ago....
My System SpecsSystem Spec
13 Dec 2010   #6

Windows 7 Enterprise (x64); Windows Server 2008 R2 (x64)
 
 

Quote   Quote: Originally Posted by hoihoisoi View Post
I see....I see......just rang the service provider and they told me the same thing. Hmm...but I wonder how did I get that laptop to work 2 years ago....
Again maybe the modem took an update?? Unknown.
My System SpecsSystem Spec
Reply

 IT USB Remote NDIS Network Problem- Cannot connect to host computer?




Thread Tools



Similar help and support threads for2: IT USB Remote NDIS Network Problem- Cannot connect to host computer?
Thread Forum
Can't connect to remote network via VPN Network & Sharing
Network Printer won't print until Host Computer reboots Network & Sharing
Remote Destop Connects but Remote Host Screen Stays BLACK Network & Sharing
Remote Desktop Client 6.1 Cannot connect to remote computer Network & Sharing
Connect to remote computer with other user name Network & Sharing
Host Computer not resetting after a remote user exits Network & Sharing
How to host my Computer for remote desktop connection Network & Sharing

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 11:03 AM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33