Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Remote Desktop Setup Issue

09 Mar 2011   #1
ballj35

Windows 7 - 64 Bit
 
 
Remote Desktop Setup Issue

Everyone,

When I started with Remote Desktop, at the top of the screen was this little menu bar for RDC. I accidentally closed it and now do not know how to get it back. Can someone pla help/tell me how to get this back on my screen, when I connect to my machine @ work using RDC. It is like a tab, but for RDC.
Thanx in advance.

Jerry


My System SpecsSystem Spec
.
09 Mar 2011   #2
Brink

64-bit Windows 10 Pro
 
 

Hello Jerry, and welcome to Seven Forums.

If you mean the tabs boxed in red below, then you can click on the Options button at the bottom left to expand and see them.

Name:  RDC.jpg
Views: 17
Size:  72.7 KB

Hope this helps,
Shawn


My System SpecsSystem Spec
09 Mar 2011   #3
ballj35

Windows 7 - 64 Bit
 
 

No, this is not what I mean. Once I am connected to my desktop @ work, then at the top of the screen, there is this like tab at the top of the screen. That is what I am referring to.
My System SpecsSystem Spec
.

09 Mar 2011   #4
Brink

64-bit Windows 10 Pro
 
 

Ah, ok. If you mean this below when the screen is maximized, then you should be able to move your mouse pointer over where it should be at the top to have it slide down. Afterwards, click on the push pin icon at the right of it to have it pinned down (always on top).

-rdp-2.jpg


My System SpecsSystem Spec
09 Mar 2011   #5
ballj35

Windows 7 - 64 Bit
 
 

got it thank you very very much! This Post can be closed.
My System SpecsSystem Spec
10 Mar 2011   #6
Brink

64-bit Windows 10 Pro
 
 

You're most welcome Jerry.
My System SpecsSystem Spec
10 Mar 2011   #7
ballj35

Windows 7 - 64 Bit
 
 

For what it is worth. I had to do the following:

1. Startup RDC.
2. Click on Options to expand.
3. Click on the Display Tab.
4. Check the box, Display the connection bar when I use the full screen.
4A. Also, drag the slider bar under Display Configuration to the far right
until it says Full Screen.
5. Click on the General Tab.
6. Save the Connection Settings.
7. The click on Connect to start the session.
8. Then went into full screen mode as you said.
9. Clicked on the push pin and everything was groovey after that.

Just in case anyone else ever has this challenge.
My System SpecsSystem Spec
10 Mar 2011   #8
Brink

64-bit Windows 10 Pro
 
 

Thank you for posting back with your results and solution Jerry.
My System SpecsSystem Spec
16 May 2012   #9
danillobh84

Windows 7 Home Premium 32bit.
 
 
help please

Brink, i was reading over your answer to this post, i really hope you can help me , i need to find a way to have the blue tab back up there, for some reason i closed it and i cant find a way to have it back up there so i can use always on top function, please man, give a hand here will you?!!!

I appreciate any ideas that come across.

Dan.
My System SpecsSystem Spec
16 May 2012   #10
Brink

64-bit Windows 10 Pro
 
 

Hello Dan, and welcome to Seven Forums.

Is it not sliding down when you hover the mouse pointer where the blue bar should be at it?
My System SpecsSystem Spec
Reply

 Remote Desktop Setup Issue




Thread Tools




Similar help and support threads
Thread Forum
Windowsmedia setup issue, XBox extender, IR remote
I am having an issue setting up windows media center on my computer. I am running windows 7 ultimate and have set up an xbox 360 as an extender in another room. I have been trying repeatedly to get this set up and keep coming up with the same result. I get to see the channels that I receive...
Media Center
Remote desktop issue
Ive got two workstations that both have windows 7 64 bit installed. When I enable remote desktop on one to get into the other with network level authentication I am not allowed to login with Admin. However if I try to log in with a user I can get into it. Ive made sure to all selected Users and...
Network & Sharing
remote desktop issue
I am able to remote desktop into my windows 7 machine once - after that if i disconnect I cannot login to the machine locally - its gets "stuck" at the welcome screen. And then if i try to login remotely again I get an error that the remote desktop service is busy. Only way to login again is to...
Network & Sharing
Remote Desktop Issue
Hey. I have two machines running windows 7 pro. I am able to remote desktop connect from one pc1 to pc2 but not pc2 to pc1. When i first turned remote desktop on pc1 to allow, pc2 could connect to pc1 but after restarting pc1 i am now unable to connect from pc2 to pc1. Not sure why this...
Network & Sharing
Remote Desktop Issue
How do you initiate a Remote Desktop session from an outside place. I want to connect from my work place to my home. Assume that there is no domain or firewall set up at the office. I port forwarded port 3389. I still can't connect. I have already enabled RDC on system properties on both computers...
Network & Sharing
remote desktop issue
I have installed the concurrent rdp hack to allow multiple concurrent sessions. I am having a serious issue with rdp - if I rdp into my machine from another machine, it works the first time. But then if i log in at the machine itself - it hangs on the logging in screen and never gets in. In...
Network & Sharing


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 22:45.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App