New
#1
Disable LAN freezes computer
If anyone can make sense of this i will buy you a cookie!
As soon as i disable my LAN adapter, Win7 freaks out and starts logging all sorts of atapi errors in event log.
the pc also becomes unusable apart from a few seconds of life every now and then.
Log Name: System
Source: Service Control Manager
Date: 06/07/2009 21:25:21
Event ID: 7042
Task Category: None
Level: Information
Keywords: Classic
User: SYSTEM
Computer: G7
Description:
The TCP/IP NetBIOS Helper service was successfully sent a stop control.
The reason specified was: 0x40030011 [Operating System: Network Connectivity (Planned)]
Comment: None
after this:
I've attached a screenshot of the event log.Log Name: System
Source: atapi
Date: 06/07/2009 21:25:21
Event ID: 11
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: G7
Description:
The driver detected a controller error on \Device\Ide\IdePort0.
there are no such errors before the highlighted entry, only after until I manage to re-enable LAN.
Its a week old installation of RC 7100. no hardware faults shown in devman. everything works perfectly 99.9% of the time. the only issue i've had with win7 is when i disabled the LAN adapter.
Sense? this makes none!