Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Ethernet Sockets - Crossover or straight-through?

08 Sep 2011   #1
darksupernova

Windows 8 Pro
 
 
Ethernet Sockets - Crossover or straight-through?

Hi All,

Done a little searching on this but cant seem to find exactly what I'm looking for. I have just acquired a fancy new BT home hub 3, unfortunately however, when the BT engineer (who fitted it) was fixing our line, he replaced our master socket with one that already contained a micro-filter rendering the phone line extension cable to my office for phone and internet half useless.
Now the router must be at the master socket or I'll need to run an adsl cable to my office, which is not recommended as it may reduce the routers connection speed. So I decided to get a really long Ethernet cable and run that down instead. This works fine but it looks messy.
I would like to fit a socket at each end of the ethernet cable, one next to the router and one next to my PC. The ethernet cable itself is a cross-over cable.

My question:

What SHOULD each cable be in the diagram below:

Hub3 -> CABLE -> Socket -> LONG CABLE -> Socket -> Cable -> Laptop

(As I mentioned above, the 'LONG CABLE' is currently a crossover cable, but can easily be re-wired)

Many thanks,

Max


My System SpecsSystem Spec
.
08 Sep 2011   #2
Barman58

Windows 10 Pro x64 x2 Windows 10 Enterprise x64, Ubuntu
 
 

As you are installing a permanent addition to your home / office I would advise that you make this a standard, (non-crossover), cable.

If you then require a crossover or other special cable to enable equipment operation you can achieve this with a Patch cable.

This will mean that if anything ever changes in your requirements this will just mean replacing the patch cable and not the built-in wiring
My System SpecsSystem Spec
08 Sep 2011   #3
darksupernova

Windows 8 Pro
 
 

Okay, so the built in cable is straight through?
Thanks, I'll do it now.

Max
My System SpecsSystem Spec
.

Reply

 Ethernet Sockets - Crossover or straight-through?




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Laptop screen goes black when I plug stuff into the USB sockets
OK, this is the most annoying thing i've ever experienced on a laptop/PC. Basically when I plug something into any of the USB's on my laptop my screen will go black, but if I run my finger across the trackpad it will light back up again for a second and then go black again, this continues no matter...
Hardware & Devices
SATA sockets 1 and 2 OK - SATA sockets 3 and 4 u/s
I have added a second SATA DVD drive to my Windows 7 Medion Akoya MD 7659 computer and it is not recognized in the BIOS or in Windows Explorer. When I reconnect this drive as the first DVD drive it works as expected thus eliminating several possibilities such as faulty power and data cables and...
Hardware & Devices
2 PC's crossover ethernet cable problem
I have 2 PC's close together on a table. They are hard connected via a cross wired ethernet cable. Until recently, I always saw both PC's and I was able to transfer files and share a printer. Now I can only see my PC on the Network. I tried self diagnosis and it indicates "no valid IP...
Network & Sharing
Dual Sockets
Hello forum members! Apple power macs are using Server based setups with dual socket intel xeon processors. So in theory couldn't I buy a dual socket mobo and two identical cpu's and run windows on it, as task manager has set affinity and other features. Has any moved on to dual sockets...
Graphic Cards
SATA power sockets
Have a new build with a Corsair HX 650 (superb device from every respect) and need to connect two 120 extra fans. Now I don't want to us the two foot long SATA to Molex cable because it would untidy if not hazardous lying around in the case. I can get a SATA to Molex adaptor then plug a fan...
Hardware & Devices
Switch USB Sockets Okay?
I set up a new Dell with Windows 7 for my father-in-law last week. That Inspiron 537ST only has 4 USB sockets on the back, so I used one of the two front sockets for his video camera. Everything works fine, but he doesn't like that cord dangling from the front. If I shut down the computer, shift...
Hardware & Devices


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 05:42.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App