No access to Internet - Limited access for both wired and wireless

Page 2 of 2 FirstFirst 12

  1. 2xg
    Posts : 2,377
    Win7 & Win8 64bit
       #11

    Yep, sounded like a faulty router. Please keep us posted.
    And i have mentioned above that wired and wireless both don't connect to internet but just the router.
    So for wired and wireless i face the same problem
      My Computer


  2. Posts : 32
    Windows 7 Ultimate x64
    Thread Starter
       #12

    I faced a new problem!
    Yesterday i was working on my laptop with internet ON via my old wired router, and suddenly the LAN's LED light disappeared and i was disconnected. And in Network Connections(ncpa.cpl) i could not see that LAN. Also in device manager i could not see the driver associated with my ethernet LAN(Realtek RTL8102E/RTL8103E Family PCI-E Fast Ethernet NIC). Then i plugged out the cable and plugged in back but it didn't work. I had to restart the laptop...it didn't detect the connection till i manually installed the drivers back. But the configuration on Windows was retained back.
    I don't know what's the matter
    But it's sure thing that my WLAN router and laptop don't work with each other :/

    EDIT: I think i got the reason for that! - Allow the computer to turn off this device to save power
    Will see if the problem persists

    Thanks
    Last edited by sp33dyk; 11 Sep 2011 at 09:11. Reason: you know it :D
      My Computer


  3. Posts : 32
    Windows 7 Ultimate x64
    Thread Starter
       #13

    Oh this is ridiculous!
    I can't figure out what's the problem!!!!!!!!!!
    I disabled allow computer to turn off..... but still sometimes i get disconnected...either the device is un-detected or it shows Limited Access! ... and REPAIR the driver and that too doesn't work, then i restart windows.
    So i can't figure out what's wrong....
    Am really confused...
    The ISP's sent their men at my house today for router replace, but no one was at home
      My Computer


  4. 2xg
    Posts : 2,377
    Win7 & Win8 64bit
       #14

    Is this for both wired and wireless connections? I guess, you'll just have to wait for the ISP Tech to show up and please keep us posted.
    sp33dyk said:
    Oh this is ridiculous!
    I can't figure out what's the problem!!!!!!!!!!
    I disabled allow computer to turn off..... but still sometimes i get disconnected...either the device is un-detected or it shows Limited Access! ... and REPAIR the driver and that too doesn't work, then i restart windows.
    So i can't figure out what's wrong....
    Am really confused...
    The ISP's sent their men at my house today for router replace, but no one was at home
    Have you ever tried my suggestion in Post# 2? Connect to another Hotspot or Wi-Fi Networks? You've mentioned that you were going to give this a try, then I don't recall or seen an update.
      My Computer


  5. Posts : 32
    Windows 7 Ultimate x64
    Thread Starter
       #15

    No i didn't get time to connect to 1 wireless spot
    But the shocking stuff is i connected to internet today(with that router without any fix by ISP's)..in both wireless and wired!
    I don't know what is/was wrong...i did some changes with network settings and others in Windows...
    When i figure out the exact issue i will post it here so someone with similar problem will get help.

    Still i face that wired connection problem...the driver goes missing anytime!

    A question: Can Power Saver Plan cause all these problems? Though the Power Saver Plan had Max priority to Network Adapter, can it be the reason?

    Thanks
    Last edited by sp33dyk; 12 Sep 2011 at 13:38. Reason: ^ see the question :)
      My Computer


  6. 2xg
    Posts : 2,377
    Win7 & Win8 64bit
       #16

    If you are getting disconnected try to Disable the problematic network adapter's Power Saving Mode.
    Windows 7 Wired Network Adapter enters power save mode (Network Steve Forum)
      My Computer


  7. Posts : 32
    Windows 7 Ultimate x64
    Thread Starter
       #17

    2xg said:
    If you are getting disconnected try to Disable the problematic network adapter's Power Saving Mode.
    Windows 7 Wired Network Adapter enters power save mode (Network Steve Forum)
    Yea i know...i did that before too but still it disappears..sometimes Scan for Hardware changes works and sometimes it doesn't, then i need to restart windows.
      My Computer


  8. 2xg
    Posts : 2,377
    Win7 & Win8 64bit
       #18

    What AV or Security Software do you have running?

    Let's try something else:

    If you have Bonjour installed, please uninstall it.
    Completly Uninstall and Remove Bonjour Service and Files (mDNSResponder.exe, mdnsNSP.dll) for Windows « Amarjeet Rai’s Blog

    Install and run Malwarebytes:
    Malwarebytes Anti-Malware - Free software downloads and software reviews - CNET Download.com

    Click on Start and type msconfig, locate the Start up and Services Tab, disable any Apps and Services that are unnecessary to run.

    Run sfc/ scannow:
    SFC /SCANNOW Command - System File Checker

    If none of the above helps, you might want to consider a restore to factory default of your laptop, try a different Network Adapter or a Clean O/S install....don't know what else to suggest.
      My Computer


  9. Posts : 32
    Windows 7 Ultimate x64
    Thread Starter
       #19

    executed sfc /scannow ... and will remove bonjour later...
    And yea, Malwarebytes has been with me since 2 years
    Tomorrow, will let you know if i still face any problems.

    Thanks
      My Computer


 
Page 2 of 2 FirstFirst 12

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 01:02.
Find Us