New
#1
Local connection cannot get a valid ip config
Windows 7 ultimate 64 bit
4gb ddr2
amd athlon x2 6000+
Broadcom netxtreme 57xx gigabite controller (integrated)
Fresh Install today.(no updates or sevice pack on yet)
I have had this problem for about 4 months now,It started when i put my daughters xp laptop into the local connection(I use a 3 dongle to connect to Internet always have and never had any trouble,shared connection).
I got xp working on my network no trouble,the trouble began when i switched off and went to bed.The next morning I replugged my xbox 360 into the local adapter and got the unidentified connection,to cut a long story short I have tried all fixes I could find on the Internet but nothing worked,so I manually assigned a ip address in the ip4 properties and everything i put on local adapter now works but it still says public unidentified network.
So today I formatted and re-installed windows 7 expecting this problem to be fixed but no,it is exactly the same,I am going bald way to quick as It Is,I need some help please.
I have this error in event log every time i restart or disable/enable local connection .event id 1001
Your computer was not assigned an address from the network (by the DHCP Server) for the Network Card with network address 0x001EC93E0D7B. The following error occurred: 0x79. Your computer will continue to try and obtain an address on its own from the network address (DHCP) server.
Also this one :
The Mobile IP Route Manager service failed to start due to the following error:
This driver has been blocked from loading
+ The DHCP allocator has disabled itself on IP address 169.254.149.243, since the IP address is outside the 192.168.137.0/255.255.255.0 scope from which addresses are being allocated to DHCP clients. To enable the DHCP allocator on this IP address, change the scope to include the IP address, or change the IP address to fall within the scope.
+ The DNS proxy agent was unable to allocate 0 bytes of memory. This may indicate that the system is low on virtual memory, or that the memory manager has encountered an internal error.
+Router Advertisement settings have been changed on the network adapter 11. The current M - Managed Address Configuration flag is true and the O - Other Stateful Configuration flag is true. User Action: If you are seeing this event frequently, then it could be due to frequent change in M and O flag settings on the router in the network. Please contact your network administrator to have it resolved.
Last edited by richie1913; 27 Sep 2011 at 07:23. Reason: Extra Info