Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Can't login to netgear router information WNR1000v2


28 Sep 2011   #1

Windows 7 Home Premium x64
 
 
Can't login to netgear router information WNR1000v2

So usually I could login into routerlogin.net

Well, now I can't. Any time I try to it redirects me to Netgear home support page. The page I need is where all my settings are for my router (Wireless, connections, etc.)

When I installed the router it gives me a link to the page directly and it would pop right to it, after typing in "admin" and "Password" but now, nothing. I don't think my Modem and Router are sharing information.

Any help would be appreciated, thanks.

My System SpecsSystem Spec
.

28 Sep 2011   #2

MS Windows 7 Ultimate 64-bit SP1
 
 

What is the private IP of your router?

If you know it then you can login to the router by typing the private IP in the address bar of internet explorer (or any web browser).

For ex: your router's private IP is
10.0.0.1 or
192.168.15.1 or
192.168.0.1 or any such IP address
type

http://10.0.0.1 or simply 10.0.0.1 (type your exact IP in place of 10.0.0.1 shown by me) in browser and enter. You will be greeted with the router's control panel's login page where you can enter the username and password.

If you do not know the private IP of your router,
Open Command prompt from Run command and enter "ipconfig /all"

in the given data look for the IP of default gateway, DHCP server or DNS server.
That is your router's private IP.
My System SpecsSystem Spec
28 Sep 2011   #3
Microsoft MVP

64-bit Windows 8.1 Enterprise
 
 

Hello Josh,

In addition, you may be able to open your router's login page by opening Network and Sharing Center in the Control Panel (icons view), click on See Full Map to see your network map, then click on your router's icon (if there) to open it. If you hover the pointer over you router's icon, it will also give you it's IP address.


Can't login to netgear router information WNR1000v2-network-map.jpg

Hope this helps,
Shawn


My System SpecsSystem Spec
.


28 Sep 2011   #4

Windows 7 Home Premium x64
 
 

So, it figures I didn't even have the router plugged into the modem. Couple days ago really bad storm, power didn't go out but link stopped flashing on the modem, when that happens, that means the internet is down. For some reason when I try to connect the modem to the router and the port to the computer, it doesn't want to work. Yet, for some strange reason it was working with the router a few minutes ago and link wasn't flashing. Really, really odd. I tried resetting the Modem and the router, nothing.
My System SpecsSystem Spec
28 Sep 2011   #5
2xg
Microsoft MVP

Win7 & Win8 64bit
 
 

Hello Josh7,

You meant Power cycle correct and not a hard reset?
Quote:
I tried resetting the Modem and the router, nothing.
Please verify if you have all the network cables and connections plugged in to the proper Ports. From the Modem, the network cable need to be plugged in to the Router's WAN or Internet Port. Your computer needs to be wired to the LAN Port of your router.
Choose a diff LAN Port to see if there's an issue with the Port that you're using.

Power Cycle your devices if above is confirmed. The step-by-step guide shd help you.

Please give us an update if it works or not.
My System SpecsSystem Spec
30 Sep 2011   #6

Windows 7 Home Premium x64
 
 

That still didn't work. For some strange reason instead I put the cable from the computer to the WAN port on the router, and the modem port to the LAN port on the router, and link was still flashing. I know your supposed to have it the other way but it seems like the routers trying to find the DNS and it can't.
My System SpecsSystem Spec
30 Sep 2011   #7

Windows 8.1 Pro w/Media Center 64bit, Windows 7 HP 64bit
 
 

The IP address for your Router should be http://192.168.1.1 see if that works.

Jim
My System SpecsSystem Spec
Reply

 Can't login to netgear router information WNR1000v2




Thread Tools



Similar help and support threads for2: Can't login to netgear router information WNR1000v2
Thread Forum
STRANGEST Router error ever, verizon login with netgear 3700 Network & Sharing
Netgear N600 router & Netgear WN3000 range extender Network & Sharing
Help please.. Dns not responding.. Netgear wgr router Network & Sharing
problem with netgear router Network & Sharing
Netgear Router Help Network & Sharing
resetting Netgear router via a different PC? Network & Sharing
Cannot access Netgear 614 v9 router Network & Sharing

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 02:54 AM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33