Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Can connect but can't browse

01 Aug 2009   #11

Win7 Build 7600 x86
 
 

Could you do command prompt: IPCONFIG/flushdns

try if you can browse now.


Another thing you could try is connect network cable to your laptop and see if that makes a difference?


I also notice your DNS server IP is very different from the gateway's IP.

Is that on purpose?

Is the DNS also on autoconfigure?

If not try that.

I'll keep an eye open for your post.

My System SpecsSystem Spec
.

01 Aug 2009   #12

windows 7 RC
 
 

Hi squonksc,

I'm writing this post from my laptop in safe-mode, all the details I attached are the same when I'm in safe-mode and in the regular mode, but for a strange resaon I still can't access the internet while I'm out of safe-mode.

I didn't enter the dns servers, so I don't know what to tell you about it, I suppose it came from my ISP.

Yishke
My System SpecsSystem Spec
01 Aug 2009   #13

Win7 Build 7600 x86
 
 

Quote   Quote: Originally Posted by yishke View Post
Hi squonksc,

I'm writing this post from my laptop in safe-mode, all the details I attached are the same when I'm in safe-mode and in the regular mode, but for a strange resaon I still can't access the internet while I'm out of safe-mode.

I didn't enter the dns servers, so I don't know what to tell you about it, I suppose it came from my ISP.

Yishke
Did you do the IPCONFIG/flushdns already?

Have you tried with a cable instead of wireless.

Problem solving is mostly ruling out options, and the rest is creativity.
My System SpecsSystem Spec
.


01 Aug 2009   #14

Windows® 8 Pro (64-bit)
 
 

you said you can connect to internet in safe mode with n/w. Right?
That means its your firewall that's causing the issue. uninstall the AV and/or firewall program and then browse the internet in normal mode. It will work. Then reinstall the AV/firewall.
My System SpecsSystem Spec
01 Aug 2009   #15

windows 7 RC
 
 

Hi,

I tried all that, the thing is:
I can connect the interent using the wireless connection when I turn on the os in safe-mode, as I understand this indicates that the problem is either in my fire-wall, or in my anti-virus, I tried removing both and it didn't helped.

Do you have any suggestions?
Thanks,
Yishke
My System SpecsSystem Spec
01 Aug 2009   #16

Win7 Build 7600 x86
 
 

Quote   Quote: Originally Posted by yishke View Post
Hi,

I tried all that, the thing is:
I can connect the interent using the wireless connection when I turn on the os in safe-mode, as I understand this indicates that the problem is either in my fire-wall, or in my anti-virus, I tried removing both and it didn't helped.

Do you have any suggestions?
Thanks,
Yishke
I'm starting to feel a bit ignored here.

Again I'll ask:

Did you do the IPCONFIG/flushdns already?

Have you tried with a cable instead of wireless?
My System SpecsSystem Spec
01 Aug 2009   #17

windows 7 RC
 
 

Sorry..

I actually replied you and not dinesh.
I tried what you (squonksc) suggested.
I also tried what dinesh offered (without the uninstall, I just turned everything off)

Yishke
BTW, I use the regular windows firewall.
My System SpecsSystem Spec
01 Aug 2009   #18

Win7 Build 7600 x86
 
 

Quote   Quote: Originally Posted by yishke View Post
Sorry..

I actually replied you and not dinesh.
I tried what you (squonksc) suggested.
I also tried what dinesh offered (without the uninstall, I just turned everything off)

Yishke
BTW, I use the regular windows firewall.
So wired won't work either?

Try this IPCONFIG /release, wait until it's done.

Then type IPCONFIG/renew


If still not work.
PM me your MSN name, that communicates a lot easier.
My System SpecsSystem Spec
01 Aug 2009   #19

Win7 Build 7600 x86
 
 

And do what Dinesh offered you.

Shutting of the firewall and antivirus might not be enough.

If the software is causing conflict, you need to de-install it.

Please do that.
My System SpecsSystem Spec
01 Aug 2009   #20

Windows® 8 Pro (64-bit)
 
 

Again, if you are able to browse websites in safe mode with n/w, its 101% your AV/firewall or browser conflicting. Besides, you can also disable all startup items in msconfig and restart your computer to see if any good happens.
My System SpecsSystem Spec
Reply

 Can connect but can't browse




Thread Tools



Similar help and support threads for2: Can connect but can't browse
Thread Forum
Solved Can't browse , can't connect to other server Network & Sharing
intermitent connect no browse issue Network & Sharing
Cant Browse UNC Root from XP to 7 after SP1 Network & Sharing
im connected but i cant browse Network & Sharing
Cant browse to localhost with iis 7 and 2 ips Network & Sharing
Can't browse network Network & Sharing

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 10:49 PM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33