Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Microsoft Isatap problem (code 10), no network connection, help please

18 Oct 2011   #11
Maguscreed

Microsoft Community Contributor Award Recipient

Windows 7 x64
 
 

If you are familiar with your bios, and how to reset it etc...
you may consider doing so now, as generally irq's are handled by hardware (i.e. the bios)
In the meantime. I have no idea when zigzag will be able to get to this it will likely be morning though.


My System SpecsSystem Spec
.
18 Oct 2011   #12
JMH

Win 7 Ultimate 64-bit. SP1.
 
 

Just passing by...

* Have you a System Restore point created PRIOR to the problem{s} occurring?

* Have you a Win 7 DVD ?

* Given that your original problem is one of connectivity please run an IPCONFIG /all and make a screenshot of the output and upload it to us here.

start>cmd>right click and run as admin>ipconfg /all


My System SpecsSystem Spec
18 Oct 2011   #13
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by dragontiger View Post
Hello guys,

I dont have any idea anymore how to fix this problem, i've been looking to the microsoft answer site, and tried the microsoft fixit device, but still it couldn't be solved.
I'm afraid that there's something gone wrong with my hardware, see if you guys could help me with this.
Attachment 179345

Attachment 179346

thanx a lot!
The enclosed snip shows that your original problem may be as simple as a LAN card configuration issue.

Please run an IPCONFIG /ALL and upload its output to us here.

Also can you tell us more about both your system specs and network setup.


Dam Jan you are quick <g>
My System SpecsSystem Spec
.

18 Oct 2011   #14
dragontiger

win 7 home premium 64bit
 
 

Quote   Quote: Originally Posted by JMH View Post
Just passing by...

* Have you a System Restore point created PRIOR to the problem{s} occurring?

* Have you a Win 7 DVD ?

* Given that your original problem is one of connectivity please run an IPCONFIG /all and make a screenshot of the output and upload it to us here.

start>cmd>right click and run as admin>ipconfg /all


Actually this isatap error had been there since the 1st time i installed the system, but i didn't mind it since im a USB modem to connect to the internet.,

I do have a win 7 64bit home premium disk, i was planning to reinstal my windows but i dont think it gonna solved the problem because i have installed another network card, and plug the lan into it, "still" no connection available.

Quote   Quote: Originally Posted by zigzag3143 View Post
The enclosed snip shows that your original problem may be as simple as a LAN card configuration issue.

Please run an IPCONFIG /ALL and upload its output to us here.

Also can you tell mors about both your system specs and network setup.
Dam Jan you are quick <g>
here's my spec guru:

mobo: MSI 870A-G54
proc : Amd phenom II x4 955 3.2Ghz
Ram: TEAM Xtreme Dark 2Gbx2 TXD34096M1600HC9DC-D

For the network setup im using a standard ADSL modem, SmartAX MT882a, huawei Tech.
I'd run the connection through my laptop and everything goes pretty well. Its automatically connected to the internet.
It seems to me that something stuck in my Pc, i just dunno what it is.

here it is my ipconfig screenshot:
Microsoft Isatap problem (code 10), no network connection, help please-ipconfig.jpg


My System SpecsSystem Spec
19 Oct 2011   #15
dragontiger

win 7 home premium 64bit
 
 

hello there guys?
My System SpecsSystem Spec
19 Oct 2011   #16
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by dragontiger View Post
Quote   Quote: Originally Posted by JMH View Post
Just passing by...

* Have you a System Restore point created PRIOR to the problem{s} occurring?

* Have you a Win 7 DVD ?

* Given that your original problem is one of connectivity please run an IPCONFIG /all and make a screenshot of the output and upload it to us here.

start>cmd>right click and run as admin>ipconfg /all


Actually this isatap error had been there since the 1st time i installed the system, but i didn't mind it since im a USB modem to connect to the internet.,

I do have a win 7 64bit home premium disk, i was planning to reinstal my windows but i dont think it gonna solved the problem because i have installed another network card, and plug the lan into it, "still" no connection available.

Quote   Quote: Originally Posted by zigzag3143 View Post
The enclosed snip shows that your original problem may be as simple as a LAN card configuration issue.

Please run an IPCONFIG /ALL and upload its output to us here.

Also can you tell mors about both your system specs and network setup.
Dam Jan you are quick <g>
here's my spec guru:

mobo: MSI 870A-G54
proc : Amd phenom II x4 955 3.2Ghz
Ram: TEAM Xtreme Dark 2Gbx2 TXD34096M1600HC9DC-D

For the network setup im using a standard ADSL modem, SmartAX MT882a, huawei Tech.
I'd run the connection through my laptop and everything goes pretty well. Its automatically connected to the internet.
It seems to me that something stuck in my Pc, i just dunno what it is.

here it is my ipconfig screenshot:
Attachment 179769
The ipconfig /all is still showing an IP that indicates it is not configured properly. It is showing an IP (169.254.x.x) that says it is not talking to the router. The bad IP address changed so I am wondering if it might be a bad cable

Have you tried re-installing the driver?
My System SpecsSystem Spec
19 Oct 2011   #17
dragontiger

win 7 home premium 64bit
 
 

im using the same cable when im plug it into laptop. and its working.
im already uninstal the network devices and all its driver, reinstall them again, and still not working.

What if i reinstall the windows?
My System SpecsSystem Spec
19 Oct 2011   #18
zigzag3143

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by dragontiger View Post
im using the same cable when im plug it into laptop. and its working.
im already uninstal the network devices and all its driver, reinstall them again, and still not working.

What if i reinstall the windows?
It would eliminate one possible source of the problem
My System SpecsSystem Spec
19 Oct 2011   #19
dragontiger

win 7 home premium 64bit
 
 

ok i'll let u guys know later. thx!
My System SpecsSystem Spec
Reply

 Microsoft Isatap problem (code 10), no network connection, help please




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Microsoft ISATAP Adapter 5- code 31
So in my device manager, under Network Adapters my Isatap adapter 5 isn't working. I am getting a code 31 which states "This device is not working properly because Windows cannot load the drivers required for this device" I have tried updating the driver -It tells me I am up to date The option...
Network & Sharing
Is it safe to delete the Microsoft ISATAP adapters?
I have a few extra Microsoft ISATAP adapters when i do an ipconfig/all. Can I delete some or all of them and furthermore what is their purpose(s)?
Network & Sharing
Microsoft ISATAP adapter
For some reason, I had a Windows 7 64-bit upgrade fail. Now when I go to Device Manager, my wireless router shows 2-Gigabyte as enabled, but then under it I see the following yellow diamond with exclamation points on the following items: Microsoft ISATAP Adapter Microsoft IPv6 toIPv4 Microsoft...
Network & Sharing
MICROSOFT ISATAP x422 and MICROSOFT TEREDO TUNNELING ADAPTER
I have a problem regarding my MICROSOFT ISATAP x422 and MICROSOFT TEREDO TUNNELING ADAPTER. going to device manager there is a yellow mark on MICROSOFT ISATAP x422 and MICROSOFT TEREDO TUNNELING ADAPTER icon and i was wondering what was wrong. Please help me.
Hardware & Devices
Pilote Microsoft ISATAP 32-Bit
: Cry:: Cry:Bonjour, je dispose d'un ordi ACER Aspire 7720Z, j'ai trouvé dans mon gestionnaire de périphériques un nommé Microsoft ISATAP adaptateur pilote de périphérique avec un point d'exclamation jaune qui est une indication que le pilote installé est fonctionnel, mais n'est pas à jour. J'ai...
Drivers
Microsoft ISATAP Adapter windows 7 Ultimate
Dear All, I have a sony Vaio VPCZ and I'm having some problem with the Gobi 2000 installation, in the device manager under network I get a warning sign to the "Microsoft ISATAP Adapter" also the Qualcomm Gobi 2000 HS-USB Mobile Broadband Device 9225, and under modem the Qualcomm Gobi...
Drivers


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 09:05.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App