Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: automatic switching from wi-fi interface to ethernet needed

23 Nov 2011   #1
ivanov22ivan

windows 7 64 ultimate
 
 
automatic switching from wi-fi interface to ethernet needed

Hi. I have my netbook connected to router. But sometimes i need to connect it by ethernet port to copy some big files quickly. In this case i had to turn my wi-fi connection off by hand. Can i tune my windows 7 so this swithing from wi-fi to ethernet port goes automatically. And switch back to wi-fi after disconnect cable?


My System SpecsSystem Spec
.
24 Nov 2011   #2
hello2011

64-bit Windows 7 Home Premium
 
 

My System SpecsSystem Spec
25 Nov 2011   #3
Dave Atkin

Windows 7 Ultimate x64
 
 

Another one here:
Disable Wireless When Connected to LAN in XP and Vista at WLAN Book.com

I have not used this though. I suggest you read a little more about it and as always scan the download before installing.



Dave
My System SpecsSystem Spec
.

Reply

 automatic switching from wi-fi interface to ethernet needed




Thread Tools




Similar help and support threads
Thread Forum
Disable automatic hardware detection and/or automatic driver install
not sure which section this pertains to specifically, but "drivers" seems close enough. issue i recently upgraded to an sli graphics configuration. since upgrading, my previous method of avoiding the TDR driver crash has stopped working. known fix that i can't get to work anymore
Drivers
more ping drops on interface 1 than interface 2
Hello forum Gurus, I Have a machine running Windows 7 x64 with two network interfaces. This machine is being used as a DVR and is connected to 4 ip cameras. The DVR software is Milestone Go. When using interface one 3 out of the 4 cameras work without any problems but camera 4 constantly...
Network & Sharing
Realtek Network Interface Controllers 10/100/1000M Gigabit Ethernet
For those interested and still using Ethernet, there's a new set of drivers for the official Realtek Network Interface Controllers 10/100/1000M Gigabit Ethernet Realtek Network Interface Controllers 10/100/1000M Gigabit Ethernet RTL8111/8168 Lan Driver (Win 7 32/64) Software: Drivers &...
Network & Sharing
Switching from IDE mode to AHCI help needed, please
I have an older win7 media server (WMC with 4 cable card tuners) that I want to add a 3TB drive. However when I first installed sata controller was set to ide mode. The 3tb drive only works with AHCI mode and of course my WIN7 will not boot if I only switch mode in bios. I was going to save...
General Discussion
SiS 900-based PCI-Fast ethernet driver source needed?
I'm actually running 7 RC(7100) on my kids ECS 661FX-M7 mobo, and decided to run the 7 Advisor.. it came back with "Go to the mfgr website to d/l the latest driver.." for the SiS 900-based PCI-Fast Ethernet, and also should update the RealTek AC'97 audio driver. As I already have 7 running ok on...
Drivers
User Interface: Starting, Launching, and Switching
More...
News


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 22:25.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App