Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: I cannot connect to my ROUTER but i can connect to internet.

22 Dec 2011   #1
VincentStrike

Windows 7 64 bit
 
 
I cannot connect to my ROUTER but i can connect to internet.

1. Question: Help please, so i don't know what the problem is but i want to portforward my port and i've tryed hunders of gateways cmd ---> ipconfig i know that but it just says ''Page could not be found'' So do you have any suggestions how can i fix this? I'm using D-Link DWA-125 Wireless N 150 USB Adapter(rev.A2)
And i cannot connect my router it's TCW770. Please i hope someone understands and helps me. So when u help me can u do step by step ur typing so i can understand.

2. Question: If i reset my router TCW770, does it uninstall my D-Link DWA-125 Wireless N 150 USB Adapter(rev.A2)? Because i don't know how to install adapter again. Please answer someone




Sorry for my bad English


My System SpecsSystem Spec
.

22 Dec 2011   #2
VincentStrike

Windows 7 64 bit
 
 

Please someone i'm just 14 years old and i need help with this.
My System SpecsSystem Spec
22 Dec 2011   #3
TanyaC

Linux Mint 17 Cinnamon | Win 7 Ult x64
 
 

The default IP address for your modem is 192.168.0.1. This is the address you would put into your browser to connect to your modems configuration page.

Pressing the reset button the the back of your modem does not reset or uninstall drivers on your PC. It should be a relatively simply job to reainstall drivers anyway if you ever needed to. If you ever had to - Insert the CD that came with your Thomson Modem and follow the on screen instructions.

You might also like to have a read of this PDF.. it's the user manual for your modem. t is in english though. Sorry, I was unable to find one in Finnish.

http://bandaancha.eu/store/inar/UM_TCW770_V2.2.pdf

If your modem's IP address is not 192.168.0.1 and you have not changed it, you might want to contact your telco provider. They may have set specific configurations.

If you're not familiar with router configurations I'd be careful with port forwarding. If you get it wrong, you could kill your internet connection. It might be worthwhile taking a look at some of the information on http://www.portforward.com too.
My System SpecsSystem Spec
.


22 Dec 2011   #4
VincentStrike

Windows 7 64 bit
 
 
Thanks

Thanks, i'll try to reset my modem now. And it have been before 192.168.0.1
My System SpecsSystem Spec
22 Dec 2011   #5
VincentStrike

Windows 7 64 bit
 
 
Not working

Quote   Quote: Originally Posted by Tanyam View Post
The default IP address for your modem is 192.168.0.1. This is the address you would put into your browser to connect to your modems configuration page.

Pressing the reset button the the back of your modem does not reset or uninstall drivers on your PC. It should be a relatively simply job to reainstall drivers anyway if you ever needed to. If you ever had to - Insert the CD that came with your Thomson Modem and follow the on screen instructions.

You might also like to have a read of this PDF.. it's the user manual for your modem. t is in english though. Sorry, I was unable to find one in Finnish.

http://bandaancha.eu/store/inar/UM_TCW770_V2.2.pdf

If your modem's IP address is not 192.168.0.1 and you have not changed it, you might want to contact your telco provider. They may have set specific configurations.

If you're not familiar with router configurations I'd be careful with port forwarding. If you get it wrong, you could kill your internet connection. It might be worthwhile taking a look at some of the information on Port Forwarding Guides Listed by Manufacturer and Model - PortForward.com too.
It doesen't work, any other ideas? I don't know what happened but i understand if u give me English guide and i hope i can portforward if you can help me some guide that works and fix for me
My System SpecsSystem Spec
22 Dec 2011   #6
CovertDeath

Windows 7 Ultimate x64
 
 

i don't mean any offense, but if you don't even know how to access your router via IP i don't think you should be messing around with things inside the router once you get there. some settings are very touchy and can easily lead to it not working properly
My System SpecsSystem Spec
22 Dec 2011   #7
profdlp

Main - Windows 7 Pro SP1 64-Bit; 2nd - Windows Server 2008 R2
 
 

Most routers do not allow you to manage them wirelessly unless you specifically change a setting to enable it. This is to prevent someone next door from getting into your router and changing things around behind your back. If you are using the correct IP Address and use an ethernet cable it should work.

Since you mentioned that you are fourteen I feel I should ask if you are doing this with your parents permission. Sorry, but I'm a dad and we dads have to look out for each other.
My System SpecsSystem Spec
23 Dec 2011   #8
TanyaC

Linux Mint 17 Cinnamon | Win 7 Ult x64
 
 

Quote   Quote: Originally Posted by VincentStrike View Post
It doesen't work, any other ideas? I don't know what happened but i understand if u give me English guide and i hope i can portforward if you can help me some guide that works and fix for me
My original reply had the link to the user manual for your modem.

I also recommend you take some time to read the stuff on portforward.com. Like I said in my original reply, If you're not familiar with the working of routers, you may find yourself in more problems than when you started.

And to reinforce what profdlp said, if this router is used by others in your household, you could break things for them too. I'm a mother of three sons, and I don't let any of my kids have the router password. I trust them, and they are quite computer and Internet Savvy. But there are some things that just shouldn't be messed with, especially if you're not confident.
Good Luck.
My System SpecsSystem Spec
23 Dec 2011   #9
VincentStrike

Windows 7 64 bit
 
 

Quote   Quote: Originally Posted by Tanyam View Post
Quote   Quote: Originally Posted by VincentStrike View Post
It doesen't work, any other ideas? I don't know what happened but i understand if u give me English guide and i hope i can portforward if you can help me some guide that works and fix for me
My original reply had the link to the user manual for your modem.

I also recommend you take some time to read the stuff on portforward.com. Like I said in my original reply, If you're not familiar with the working of routers, you may find yourself in more problems than when you started.

And to reinforce what profdlp said, if this router is used by others in your household, you could break things for them too. I'm a mother of three sons, and I don't let any of my kids have the router password. I trust them, and they are quite computer and Internet Savvy. But there are some things that just shouldn't be messed with, especially if you're not confident.
Good Luck.
Well i have portforwarded 192.168.0.1 before with my router and i know how to do these things and i'm only one in the family who's the computer master Soo... any other tips? I'm going to try to cable thing now.
My System SpecsSystem Spec
23 Dec 2011   #10
VincentStrike

Windows 7 64 bit
 
 

Ugh not working with cable too.... :S Any tips??
My System SpecsSystem Spec
Reply

 I cannot connect to my ROUTER but i can connect to internet.




Thread Tools





Similar help and support threads
Thread Forum
Windows 7 doesn't connect with internet when IP changes on router
Hello 7forums, So my current broadband is BT homehub 3 (UK) and when i turn the hub off for a few minutes to change IP, my computer doesn't automatically connect to the internet if the computer is turned off. My only fix for this is to ensure the computer is turned on, then proceed to turn...
Network & Sharing
CAN connect to internet, CAN'T connect to router
I'm trying to connect to either of two routers I have. With either one I can connect to internet (obviously... I'm typing this). I can NOT connect to the router itself to update the firmware or change the settings. The URL to connect to each: Netgear WGR614v6, http://192.168.1.1 or...
Network & Sharing
Router wont connect to the internet
Anytime I try to connect my modem to my router I diagnose the problem it gives me the attachment below. Anyone have any Idea how I can solve this? It was fine until my internet decided it didn't want to work for 2 days. Thanks I have a NETGEAR WNR1000 v2 WNR1000v2
Network & Sharing
Can't connect to the internet or my wired Router
Just did a clean windows 7 x64 installation on a build a box computer with a new hard drive. Install went fine. Plugged it in to my 3 month old Linksys Wireless G Broadband Router (WRT54GL) and it doesn't recognize that there is any connection at all. Windows says "No connections are available" and...
Network & Sharing
Cannot connect to my internet on Desktop but can on Laptop via Router!
Hello guys, my network card at the mo on my desktop is, admittingly, a really bad card driver by the looks of the forums, its a Realtek 8111B. Now it was working perfectly fine last night, and all of a sudden, bam. no internet, I was only on skype and playing a game! 0,0 Its showing as an...
Network & Sharing
Connected to router but cannot connect to internet
I just got a dell laptop, inspiron with windows 7, that i can use at home on my wireless network with no problem. When I got to other places, like my fathers house, I can connect to the router but do not get internect connectivity. Any ideas, thanks in advance.
Network & Sharing

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 04:48.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App