|16 Jan 2012||#1|
| || |
USB Wireless dongle freezes wireless until explorer restart/removal
A while back i purchased a Tenda wireless dongle and started to use it instead of a very long winded wireless to wired connection bridge between two computers. Anyway, the dongle was suggested by a housemate who uses the exact same model and make on our wireless hub in the house. Everything was fine until a few weeks after purchase it started to have issue connecting particularly after restart. I tore several clumps of hair out trawling the internet to find a cure to the issue... A friend even lent me a unique dongle but it provided a temporary fix before following in the same footsteps. I even tried both dongles (identical in make and model) across the two PC's on the network they belonged to. On both occasions each dongle connected instantly and without issue on the other PC and took a long time and eventually failed on my PC. Finally i give up and went as far as re-installing windows 7 fresh and slowly installing everything again including the dongle.
Everything was fine... (approximately 2-3 months) until tonight were its decided to tell me that it cant find the network im trying to connect. My housemate however is currently connected to the network fine, and the PC with the same dongle connects as always without a hitch. I've tried restarting both the wireless hub, the dongle the computer the drivers disabling and re enabling everything that can possibly be connected with internet.
Whats weird is it does however find my network and a few others occasionally, when it does i click connect and it freezes the wireless frame and anything to do with the wireless settings in windows. This is only unfrozen when i either restart the PC or the adapter is removed. I did try the troubleshoot tool provided by windows 7 however this either tells me everything is fine... or normally because my network is not present it wont go any further until i try and connect.
When i choose to remove the adapter (physically)... everything unfreezes and it continues for a bit as if everything is fine... and then realises its been removed and disconnects. Like for example when i first uninstalled everything and removed all my saved networks it obviously asked me for the security code but only once i removed the dongle... which was helpful, Not.
What confuses me more is it randomness... it sometimes shows the networks sometimes it doesnt, It just there now while writing this and attempting to fix it allowed me to enter the security code.. but once i hit enter it proceeded to hang. I tried the troubleshooter which as this point just replied with it cannot identify the problem. Couple this with the fact that between today and yesterday.. i have changed nothing about either the USB or the router.. and i keep my computer protected with AV and firewall. (and yes i have tried temporarily turning these off incase they are interfering with the device, and also different USB slots)
I'm a techy kinda guy and i enjoy the puzzles of troubleshooting but this ones got to the point where im gonna end up with a large credit card bill as i completely change my computer, and i cant afford that to be frank
Device is working correctly and present in device manager.
All combinations of devices and drivers have been used with no resolution
Repaired and troubleshooted/restarted devices connected with wireless/computer
Issue is not repeatable and erratic at best, no definitive causality...
USB Model is Tenda W322u v2.0 (although i don't feel its relevant but i will be asked :P)
Windows 7 professional 64x (All recent updates, SP1)
i5 @2.67 (No overclocking)
NVIDA GeForce GTX 275
650W Power supply
Kept well cool via a multitude of fans and filters
Any other information required just say if you want i'll do an ipconfig and post also (:
|My System Specs|
|16 Jan 2012||#2|
| || |
Literally just finished and it works... Like I've done nothing different just pulled it out once more for the 8/9 time in the past few hours and its suddenly started working asked for security key connected within 1min or so. I don't trust it however and if any possible causes can be identified here i'll be glad.. in case it should happen again >.>
|My System Specs|
|17 Jan 2012||#3|
| || |
Strike that... After turning my machine off last night when i woke up this morning to use it again it logged in didnt automatically connect, when i selected the network the window "connect to a network" with "getting information from the house" is now not responding and im back to square one.
|My System Specs|
|Similar help and support threads for2: USB Wireless dongle freezes wireless until explorer restart/removal|
|wireless headphone dongle with aux to usb cable?||Hardware & Devices|
|How to find out browing history of connected users to Wireless dongle||Network & Sharing|
|Wireless usb hub that connects with small dongle (or bluetooth dongle)||Hardware & Devices|
|Problem with USB Wireless dongle||Network & Sharing|
|Best UK Wireless Dongle?||Hardware & Devices|
|Can the wireless mouse and keyboard use the same USB dongle?||Hardware & Devices|
|Wireless Dongle Recommendation||Network & Sharing|
|Our Sites ||Site Links ||About Us ||Find Us |
© Designer Media Ltd
All times are GMT -5. The time now is 08:05 PM.