|26 Jan 2012||#1|
| || |
Network Adapter Card is not permitting access to TCP/IPv4 properties.
The machine i'm using as I type, has Windows 7 x64 and uses a Realtek PCIe GBE Family Controller. Before I upgraded my router to a new Linksys E3200 "N", I was able to enter the controllers properties and change the Ip from DHCP to static.
Prior to changing routers, I entered the properties and changed the Realtek Controller from its static IP back to DHCP.
I then entered the router control panel and established my settings and went back into the properties of the Realtek Controller and attempted to enter the TCP/IPv4 properties.
I was stunned to get the following error message appeared saying that "In order to use TCP/IP, you must install and enable a network adapter card." (see screenshot_Need network adapter card)
So I then punched the "Install" button on the controllers properties dialogue panel. This brought up a new dialogue box titled "Select Network Feature type" (see screenshot_what network feature type).
I selected "Protocol" and faced (see screenshot_which Protocol) what seems to be the end of my attempts to return the controller card to a static IP for this evening. I'm hoping that some Guru in cyberspace can conjur up the correct settings to enable what I want to do.
Mahalo plenty and much aloha,
|My System Specs|
|Similar help and support threads for2: Network Adapter Card is not permitting access to TCP/IPv4 properties.|
|Wifi Adapter cant obtain ipv4 and ipv6||Network & Sharing|
|VPN "No Network Access", ipv4 not connected||Network & Sharing|
|Network adapter properties||Network & Sharing|
|LAN Connection Problems ( Ipv4 and Ipv6: No Internet/Network Access)||Network & Sharing|
|Network wireless adapter problems - Limited Access||Network & Sharing|
|IPV4 an IPV6 No Network Access||Network & Sharing|
|Viewing a network adapter properties results in freezing.||Network & Sharing|
|Our Sites ||Site Links ||About Us ||Find Us |
© Designer Media Ltd
All times are GMT -5. The time now is 01:27 PM.