Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: how to manually set up your ip dns server subnet mask and default gate

26 Feb 2012   #1
Ajji

Windows 7 Home Basic 64 bit
 
 
how to manually set up your ip dns server subnet mask and default gate

i always have this problem... my ip is always 169.xxx.xxx and i want to manually set up my ip so i wont this problem..


My System SpecsSystem Spec
.

26 Feb 2012   #2
zigzag3143

Win 8 Release candidate 8400
 
 

If you IP starts with 169.254.x.x that means you are configured incorrectly. You will need to fix that before you can manually fix the ip.

I suggested you run IPCONFIG /ALL and take a snip of the out put and upload it to us here/.
My System SpecsSystem Spec
26 Feb 2012   #3
Ajji

Windows 7 Home Basic 64 bit
 
 



here is the result when i ipconfig all
My System SpecsSystem Spec
.


26 Feb 2012   #4
zigzag3143

Win 8 Release candidate 8400
 
 

Subnet mask should be 255.255.255.0
My System SpecsSystem Spec
26 Feb 2012   #5
Ajji

Windows 7 Home Basic 64 bit
 
 

Quote   Quote: Originally Posted by zigzag3143 View Post
Subnet mask should be 255.255.255.0
how do i change it?
My System SpecsSystem Spec
Reply

 how to manually set up your ip dns server subnet mask and default gate




Thread Tools





Similar help and support threads
Thread Forum
Calculating the range of an ip address from a subnet mask/ prefix.
Hi there, I am doing the Microsoft 70/ 680 exam for my college course and i have an exam next week for networking stuff and calculating the range of an ip address from the subnet mask. I was wondering if any of you guys can give me some practice examples to work on such as the one i've worked on...
Network & Sharing
How do you tell where the subnet mask is located?
I have a subnet mask of 255.255.248.0 and i would like to know where it is located in the world. Thanks.
General Discussion
Internet keeps going out: Default Gateway and DNS Server error
I am running Windows 7 64-bit. My Internet connection keeps getting dropped, and when I run the troubleshooter, I can get two different messages: "(DNS server) is not responding" or "The default gateway is not available." When I get the former, I have to restart my router. Any amount of time later,...
Network & Sharing
Default Gateway Not Available and/or DNS Server Not Responding
Sometimes I have internet connection for a few seconds, if I'm lucky maybe three minutes. I can get two different messages when I run the Windows Troubleshooting option: "DNS server isn't responding" or "The default gateway is not available." This has been going on about a week. I have not made...
Network & Sharing
Alternatives to the default Windows VPN Server?
I am looking for any VPN software for windows which allows me to host a VPN server so normal Windows users can connect to me without 3rd party software. I do not want to use the built-in windows 7 VPN a.k.a. "incomming connections" because it doesn't give you any panel for controlling many...
Network & Sharing
Why is my subnet mask 255.255.248.0?
http://s14.postimage.org/fd9nl4xi7/Capture.jpg As shown in the screen shot above, I have my router settings set for a subnet mask of 255.255.255.0 and DHCP Range of 192.168.1.100 - 192.168.1.149 which is default I believe, I haven't changed either setting the only thing I changed is in the Port...
Network & Sharing

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 03:20.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App