Desktop wifi slow.Wired desktop Fast.Laptop wifi fast.

Page 3 of 3 FirstFirst 123

  1. Posts : 8,870
    Windows 7 Ult, Windows 8.1 Pro,
       #21

    user755 said:
    I don't see a 'channel bonding' section of the hub, I'll have a proper search later but its not located on the 'easy wifi' page.

    Since amending the channel to Ch1, another router has appeared using channel 1 :-(

    Although there is a small change in the graph following this change its not very significant. Still only recording 25MB when other pc/laptop are receiving near 60MB.

    I think I will take the pc up to the router, connect directly and see what I'm getting...

    The settings would be on the routers set up page. The hub is the same as a switch.
    You should be able to get to your routers set up page by typing 192.168.0.1 in your browsers URL.

    The other machine using channel 1 and is using wireless G which doesn't have a very strong signal so might not affect you very much at all. The DNS you are using is also suspect and it should be pointing to the routers default gateway but it's not for some reason.

    Did you set a DNS server on your machines IP page? If there is a channel 1 being used then you would still want to turn off channel bonding which is on, and try going to channel 6. Trying different channels is more about signal quality and not really about signal strength.

    As far as signal strength, the distance and the number of walls between you and the access point has everything to do with that. The only way to increase your signal strength is to move closer to access point, or eliminate the walls between you and the access point or move the access point closer to that particular machine.
    Last edited by chev65; 27 Mar 2012 at 11:43.
      My Computer


  2. Posts : 14
    Win 7 Ultimate
    Thread Starter
       #22

    I haven't been able to find any 'tool' that I can use for SNR, however I have found the info from the router:

    I have limited knowledge and don't really understand this fully.


    Downstream ChannelsLock StatusModulationChannel IDMax Raw Bit RateFrequencyPowerSNRDocsis/EuroDocsis lockedLockedQAM2563355616000 Kbits/sec298750000 Hz16.2 dBmV42.4 dBHybridLockedQAM2563455616000 Kbits/sec306750000 Hz16.3 dBmV42.6 dBHybridLockedQAM2563555616000 Kbits/sec314750000 Hz16.0 dBmV42.4 dBHybridLockedQAM2563655616000 Kbits/sec322750000 Hz15.7 dBmV42.4 dBHybridUnlockedUnknown00 Ksym/sec0 Hz0.0 dBmV0.0 dBUnknownUnlockedUnknown00 Ksym/sec0 Hz0.0 dBmV0.0 dBUnknownUnlockedUnknown00 Ksym/sec0 Hz0.0 dBmV0.0 dBUnknownUnlockedUnknown00 Ksym/sec0 Hz0.0 dBmV0.0 dBUnknown
      My Computer


  3. Posts : 8,870
    Windows 7 Ult, Windows 8.1 Pro,
       #23

    I'm not sure what any of that means but as I mentioned before if you want better signal strength you will need to follow the directions I posted earlier.
      My Computer


  4. Posts : 14
    Win 7 Ultimate
    Thread Starter
       #24

    (OK that cut/paste didn't work, I'll attach it)
      My Computer


  5. Posts : 14
    Win 7 Ultimate
    Thread Starter
       #25

    Page hadn't updated, sorry
    Attached Thumbnails Attached Thumbnails Desktop wifi slow.Wired desktop Fast.Laptop wifi fast.-router-screenprint-1.jpg  
      My Computer


  6. Ot1
    Posts : 13
    windows XP
       #26

    user755 said:
    I haven't been able to find any 'tool' that I can use for SNR, however I have found the info from the router:

    I have limited knowledge and don't really understand this fully.


    Downstream ChannelsLock StatusModulationChannel IDMax Raw Bit RateFrequencyPowerSNRDocsis/EuroDocsis lockedLockedQAM2563355616000 Kbits/sec298750000 Hz16.2 dBmV42.4 dBHybridLockedQAM2563455616000 Kbits/sec306750000 Hz16.3 dBmV42.6 dBHybridLockedQAM2563555616000 Kbits/sec314750000 Hz16.0 dBmV42.4 dBHybridLockedQAM2563655616000 Kbits/sec322750000 Hz15.7 dBmV42.4 dBHybridUnlockedUnknown00 Ksym/sec0 Hz0.0 dBmV0.0 dBUnknownUnlockedUnknown00 Ksym/sec0 Hz0.0 dBmV0.0 dBUnknownUnlockedUnknown00 Ksym/sec0 Hz0.0 dBmV0.0 dBUnknownUnlockedUnknown00 Ksym/sec0 Hz0.0 dBmV0.0 dBUnknown
    Network stumbler is one tool for snr.
      My Computer


 
Page 3 of 3 FirstFirst 123

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 22:56.
Find Us