Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: PXE boot and running ghost from a network location

29 Mar 2012   #1
hapoogold

windows 7
 
 
PXE boot and running ghost from a network location

Hi,
I used this weblog post (GHOST PXE Boot Via TFTP - Tygarbyte) to boot computer from network and run ghost on a network location.
now when I try to boot several computers from the network and run ghost at the same time it gives me this error:
error 52: A duplicate workgroup or computer name exists on the network.

can you please help me to solve the problem?

I want to boot several computers and run ghost from a network location

thanks


My System SpecsSystem Spec
.
05 Apr 2012   #2
Dave Atkin

Windows 7 Ultimate x64
 
 

I believe you will need to have multiple images or they will all be booting with the same PC name.


Dave
My System SpecsSystem Spec
Reply

 PXE boot and running ghost from a network location




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Network Location - Set as Home, Work, or Public Network
How to Set the Network Location Type in Windows 7 This will show you how to change the Windows 7 network location to be either a Home network, Work network (private), or Public network type. During the installation of Windows 7, or the first time that you connect to a network, you must...
Tutorials
change my network location to its true location
how do i change my network location to its true location https://lh5.googleusercontent.com/-4XF_l3FVKBs/UD2aoiydEsI/AAAAAAAAARQ/0miH3kQwvTc/s248/Capture.JPG see where my web sites on msn is?
Network & Sharing
W7 wont boot after ghost image restore on new harddisk
I have installed Windows 7 on a 1st PC, included driver and other software. I use GHOST to copy partition image of 1st computer. Partition that have backup, >> 100MB System Reserve Partition >> Drive C Then, use Ghost to restore the 2 partition image to 2nd PC's harddisk. After task...
Backup and Restore
Windows Fails to Boot after Norton Ghost recovery (autochk not found)
Hi guys, I recently backed up my Hitachi drive which developed bad sectors and then restored it to a same size Seagate one. The operation was done through Norton Ghost. Both backup and restore operations completed successfully, however, when I tried to boot up with the new drive, Windows 7...
Backup and Restore
Problem with mapping network location - network printer
Hello! I added a printer to my network (hp c5180) via ethernet cable. But problem accords when I try to map a network location (card reader 5in1 or sth like that, is used to read SD, xD, ms cards used in cameras) from which I d like to copy images, files in explorer without extra software from...
Network & Sharing
Making a boot DVD of Ghost files
I hope not OT - not W7, but Windows, anyway... I want to make a new DVD from an old one in the hopes that it will be easier to read. Is it enough to download the first to my HDD and burn these files to a new one? I suspect not. Can anyone help, please? The backstory is: I have a dodgy...
General Discussion


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 13:11.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App