Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: No network acesss, ipv4 and ipv6 not connected

24 Apr 2012   #21
chev65

Windows 7 Ult, Windows 8.1 Pro,
 
 

Quote   Quote: Originally Posted by silverdee View Post
After I reenabled the auto ip, my ipconfig reverted back to same values of the ipconfig I first posted in the first page. I tried disabling and enabling the nics but nothing happened. I also tried uninstalling and reinstalling them, but again, there was still no connection.
Quote:
do your network uses any domain or some other things? who configures your router? is your DHCP service from router?
I don't really understand the first question. My friend configured my router. I don't know how to answer the last question either. Where do I find that out?
There looks to be a tunnel adaptor problem to me although I can't see the rest of your ipconfig.

Try running the file below first, save file then unzip and click on it and let it run.




Attached Files
File Type: zip 6to4remover.zip (455.4 KB, 9048 views)
My System SpecsSystem Spec
.
24 Apr 2012   #22
silverdee

Windows 7
 
 

@vaidas3 There is only one pc on my network. My router only has two ethernet ports. One connects to the modem, and the other connects to the computer I choose to use. (So I'm switching back and forth with my desktop and laptop) My router is also a voip, so I have phone line connected too.

I tried doing the manual config, and inputted values for the last digit of the ip address, but there was no response to the changes. When I do an Ip config, it doesn't list the term "Ip Address" like my desktop does. The only term similar to that is IPv4 ip address? I also have one network available in my home.

Here is my ping from my desktop:

Code:
Pinging 192.168.254.4 with 32 bytes of data:

Reply from 192.168.254.4: bytes=32 time<1ms TTL=128
Reply from 192.168.254.4: bytes=32 time<1ms TTL=128
Reply from 192.168.254.4: bytes=32 time<1ms TTL=128
Reply from 192.168.254.4: bytes=32 time<1ms TTL=128

Ping statistics for 192.168.254.4:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 0ms, Maximum = 0ms, Average = 0ms


C:\Documents and Settings\charm>ping 192.168.254.1

Pinging 192.168.254.1 with 32 bytes of data:

Reply from 192.168.254.1: bytes=32 time<1ms TTL=250
Reply from 192.168.254.1: bytes=32 time<1ms TTL=250
Reply from 192.168.254.1: bytes=32 time<1ms TTL=250
Reply from 192.168.254.1: bytes=32 time<1ms TTL=250

Ping statistics for 192.168.254.1:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 0ms, Maximum = 0ms, Average = 0ms

C:\Documents and Settings\charm>ping 208.67.222.222

Pinging 208.67.222.222 with 32 bytes of data:

Reply from 208.67.222.222: bytes=32 time=48ms TTL=50
Reply from 208.67.222.222: bytes=32 time=46ms TTL=50
Reply from 208.67.222.222: bytes=32 time=48ms TTL=50
Reply from 208.67.222.222: bytes=32 time=46ms TTL=50

Ping statistics for 208.67.222.222:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 46ms, Maximum = 48ms, Average = 47ms

C:\Documents and Settings\charm>ping 8.8.8.8

Pinging 8.8.8.8 with 32 bytes of data:

Reply from 8.8.8.8: bytes=32 time=40ms TTL=45
Reply from 8.8.8.8: bytes=32 time=57ms TTL=45
Reply from 8.8.8.8: bytes=32 time=41ms TTL=45
Reply from 8.8.8.8: bytes=32 time=41ms TTL=45

Ping statistics for 8.8.8.8:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 40ms, Maximum = 57ms, Average = 44ms

C:\Documents and Settings\charm>ping yahoo.com

Pinging yahoo.com [98.139.183.24] with 32 bytes of data:

Reply from 98.139.183.24: bytes=32 time=127ms TTL=48
Reply from 98.139.183.24: bytes=32 time=147ms TTL=48
Reply from 98.139.183.24: bytes=32 time=147ms TTL=47
Reply from 98.139.183.24: bytes=32 time=191ms TTL=47

Ping statistics for 98.139.183.24:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 127ms, Maximum = 191ms, Average = 153ms
And here's my ping for laptop. I'm not sure if I did this one right.
Code:
C:\Users\charm>ping 192.168.254.5

Pinging 192.168.254.5 with 32 bytes of data:
Reply from 192.168.254.5: bytes=32 time<1ms TTL=128
Reply from 192.168.254.5: bytes=32 time<1ms TTL=128
Reply from 192.168.254.5: bytes=32 time<1ms TTL=128
Reply from 192.168.254.5: bytes=32 time<1ms TTL=128

Ping statistics for 192.168.254.5:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 0ms, Maximum = 0ms, Average = 0ms

C:\Users\charm>ping 192.168.254.1

Pinging 192.168.254.1 with 32 bytes of data:
Reply from 192.168.254.5: Destination host unreachable.
Reply from 192.168.254.5: Destination host unreachable.
Reply from 192.168.254.5: Destination host unreachable.
Reply from 192.168.254.5: Destination host unreachable.

Ping statistics for 192.168.254.1:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),

C:\Users\charm>ping 208.67.220.220

Pinging 208.67.220.220 with 32 bytes of data:
Reply from 192.168.254.5: Destination host unreachable.
Reply from 192.168.254.5: Destination host unreachable.
Reply from 192.168.254.5: Destination host unreachable.
Reply from 192.168.254.5: Destination host unreachable.

Ping statistics for 208.67.220.220:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),

C:\Users\charm>ping 8.8.8.8

Pinging 8.8.8.8 with 32 bytes of data:
Reply from 192.168.254.5: Destination host unreachable.
Reply from 192.168.254.5: Destination host unreachable.
Reply from 192.168.254.5: Destination host unreachable.
Reply from 192.168.254.5: Destination host unreachable.

Ping statistics for 8.8.8.8:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),



C:\Users\charm>ping yahoo.com
Ping request could not find host yahoo.com. Please check the name and try again.
@chev65 I tried another ip config but it doesn't list anything beyond the tunnel adapters. I ran the program you attached but when I'm prompted to 'press any key' the window disappears. This repeated after I tried to run it a couple more times. The strange thing is that my Windows 7 is a 64 bit, but when I click on ia64, the program tells me its intended for a different machine type. But with the i386, I don't get the message at all? Either way, the window disappears. Or was the program designed to be that way?
My System SpecsSystem Spec
24 Apr 2012   #23
F5ing

Windows 7 Ultimate x64
 
 

Go to Control Panel -> All Control Panel Items -> Network and Sharing Center and click on "Change Adapter Settings". Right click on "Local Area Connection" and select properties. Post a screenshot of that window so we can see what adapters are present.

When you say "I also have one network available in my home", are you just saying that you only have one network?
My System SpecsSystem Spec
.

24 Apr 2012   #24
silverdee

Windows 7
 
 

I'm not quite sure. I'm guessing one because I have one modem. Please explain, because I don't really know.

And here's a pic of the adapters.


Attached Images
No network acesss, ipv4 and ipv6 not connected-screenshot.jpg 
My System SpecsSystem Spec
24 Apr 2012   #25
F5ing

Windows 7 Ultimate x64
 
 

Is the "Reliable Multicast Protocol" checked in your other machine?

And yes, one modem typically means one ISP (internet service provider). There are exceptions, though. Basically just wondering why you had stated it, that's all. It's good though, the more info you provide, the easier to help.
My System SpecsSystem Spec
24 Apr 2012   #26
silverdee

Windows 7
 
 

Oh I see. Vaidas3 was asking me if I had any other available networks I could connect to. I don't have Reliable Multicast Protocol in my desktop. Just in case the information is needed that machine's os is windows xp.

Desktop adapters:


Attached Images
No network acesss, ipv4 and ipv6 not connected-desktop.jpg 
My System SpecsSystem Spec
24 Apr 2012   #27
F5ing

Windows 7 Ultimate x64
 
 

Okay, select it and then click uninstall, then okay. Then reboot and see what you've got.

(You can always install it again later, if needed).
My System SpecsSystem Spec
24 Apr 2012   #28
silverdee

Windows 7
 
 

Still no luck. Just in case I need the Reliable Multicast Protocol later, how do I reinstall it?
My System SpecsSystem Spec
24 Apr 2012   #29
F5ing

Windows 7 Ultimate x64
 
 

Quote   Quote: Originally Posted by silverdee View Post
Still no luck. Just in case I need the Reliable Multicast Protocol later, how do I reinstall it?
Go ahead and do it now:

In the same dialog window, click install, in the window that appears, click protocol and then add, another window opens where you can select it to reinstall it.

Let me know when you're done.
My System SpecsSystem Spec
24 Apr 2012   #30
silverdee

Windows 7
 
 

Okay. I reinstalled the protocol.
My System SpecsSystem Spec
Reply

 No network acesss, ipv4 and ipv6 not connected




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Help! IPV4 IPV6 no network access
Hi. I hope I am posting in the correct place, I am a new member. When I connect to the internet I keep getting the message "no network access" And when I click properties I see the following: IPV4 no network access IPV6 no network access
Network & Sharing
Cable connected to modem, ipv6 no internet access ipv4 no network
Hello Guys, I've been searching for the past 2 days a solution, but nothing came up to work. Tried different things, nothing good yet. So I'm directly connected to a modem, cable, and well, my computer takes time to identify and then identifies it first a a public network (i was able to...
Network & Sharing
Ipv4 and Ipv6 not connected no more internet access!!
Hello everyone. I recently had a sound problem on the internet in google chrome ( no sound at all although the system sound worked fine) I contacted tech guru to solve that problem. The guy installed shockewave and reinstall chrome on my pc and reboot my pc all remotly. At this stage my problem...
Network & Sharing
Windows 7 - No network acesss, ipv4 and ipv6 not connected
Hi, I am on an aspire one netbook and can no longer connect to the internet via wireless or a wired connection. I typed ipconfig/all in command prompt and all i got was..: Host name . . . . . . . .. . . . .: Primary Dns Suffix . . . . . . . : Node Type. . . . . . . . . . . . .: Broadcast IP...
Network & Sharing
LAN Connection Problems ( Ipv4 and Ipv6: No Internet/Network Access)
Hello, today I woke up and there was no Internet on my computer. I have had this happen to me before so I did the usual, restart and reboot but it didn't work. So I have been researching on my phone for 3 hours now and nothing has helped me fix this. It will switch from " No network access" and "no...
Network & Sharing
IPV4 an IPV6 No Network Access
Hi all, I've been browsing the forum for a solution to this. I've tried uninstalling my network driver and installing again, i've no bonjour services and even tried uninstalling adobe cs5 but none worked.My wireless have internet connection on IPV4 if my Ethernet Adapter is connected to my...
Network & Sharing


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 22:13.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App