Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: No network acesss, ipv4 and ipv6 not connected

24 Apr 2012   #31
F5ing

Windows 7 Ultimate x64
 
 

Did you ever run that 6to4remover file that chev65 provided in this post: No network acesss, ipv4 and ipv6 not connected?


My System SpecsSystem Spec
.
24 Apr 2012   #32
silverdee

Windows 7
 
 

Yes. But I don't think the program worked because when it prompted me to press any key, the window just disappeared.
My System SpecsSystem Spec
24 Apr 2012   #33
F5ing

Windows 7 Ultimate x64
 
 

Is the router also wireless?
My System SpecsSystem Spec
.

24 Apr 2012   #34
silverdee

Windows 7
 
 

No. It's not wireless.
My System SpecsSystem Spec
24 Apr 2012   #35
F5ing

Windows 7 Ultimate x64
 
 

Okay. The reason I asked is because I thought maybe there was some damage done when the wire was "pulled" from the laptop. Thought you might try connecting by wireless...

I would try running the appropriate file in the zip posted by chev65 again, maybe do it with everything minimized so that no other windows can get in the way in case it pops up another window. I also don't know if UAC will pop up (where the screen darkens and a window appears to ask you whether to allow or not), so pay attention to that.

Then do the flush.bat file over again, and after reboot, do an ipconfig/all again and post.
My System SpecsSystem Spec
25 Apr 2012   #36
silverdee

Windows 7
 
 

Okay. So 4 UACs popped up and I believe it deleted something. I then did the flush and I got this text before it rebooted.

Code:
C:\Windows\system32>pushd\windows\system32\drivers\etc

C:\Windows\System32\drivers\etc>attrib -h -s -r hosts

C:\Windows\System32\drivers\etc>echo 127.0.0.1 localhost 1>HOSTS

C:\Windows\System32\drivers\etc>attrib +r +h +s hosts

C:\Windows\System32\drivers\etc>popd

C:\Windows\System32>ipconfig /release

Windows IP Configuration

An error occurred while releasing interface Local Area Connection : An address h
as not yet been associated with the network endpoint.

No operation can be performed on Wireless Network Connection while it has its me
dia disconnected.

C:\Windows\System32>ipconfig /renew

Windows IP Configuration
and here's my new ipconfig

Quote:
Host Name . . . . . . . . . . . . : charm-HP
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Realtek PCIe FE Family Controller
Physical Address. . . . . . . . . : 44-1E-A1-D4-6A-CF
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::1da2:12c9:d529:c235%14(Preferred)
Autoconfiguration IPv4 Address. . : 169.254.194.53(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.0.0
Default Gateway . . . . . . . . . :
DHCPv6 IAID . . . . . . . . . . . : 189013665
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-15-B2-FA-17-44-1E-A1-D4-6A-CF

DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1
fec0:0:0:ffff::2%1
fec0:0:0:ffff::3%1
NetBIOS over Tcpip. . . . . . . . : Enabled

Wireless LAN adapter Wireless Network Connection:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Realtek RTL8188CE 802.11b/g/n WiFi Adapte
r
Physical Address. . . . . . . . . : AC-81-12-AD-85-C5
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

Tunnel adapter isatap.{9D0A9DDA-25C2-462C-B6AD-09A0E9BDC5C4}:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

Tunnel adapter Local Area Connection* 11:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft 6to4 Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

Tunnel adapter Teredo Tunneling Pseudo-Interface:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

Tunnel adapter isatap.{2B0AF32E-368F-4CE3-845D-F7FEC4427044}:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #3
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
I'm going to try with the wireless network the next time I go to the library or some cafe. I think I can connect through a wireless network because when I turn on the wi-fi button, it's able to detect my neighbor's network.
My System SpecsSystem Spec
25 Apr 2012   #37
F5ing

Windows 7 Ultimate x64
 
 

You could try uninstalling the IPv6 TCP/IP protocol from the network adapter. I see you still have IPv6 addresses listed in ipconfig as well as the tunnel adapters.

There are other ways to get rid of those tunnel adapters.
My System SpecsSystem Spec
25 Apr 2012   #38
vaidas3

Windows 7 pro 64bit. (SP1)
 
 

Quote:
C:\Users\charm>ping 192.168.254.5

Pinging 192.168.254.5 with 32 bytes of data:
Reply from 192.168.254.5: bytes=32 time<1ms TTL=128
Reply from 192.168.254.5: bytes=32 time<1ms TTL=128
Reply from 192.168.254.5: bytes=32 time<1ms TTL=128
Reply from 192.168.254.5: bytes=32 time<1ms TTL=128

Ping statistics for 192.168.254.5:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
at least you can ping local host that is good thing at least tcp/ip protocol seems to be working

but it seems all other locations can not be pinged
lets go bit deeper
in cmd type arp -a and paste results

so as far as i understand your network uses only one pc at a time
and looks like this

Internet<-->modem<->router<->pc
cable between router and pc is changed depending which pc is used
by the way why is dns suffix used (that is why i asked does your network has a domain)
Connection-specific DNS Suffix . : socal.rr.com

can you for testing purposes eliminate router and make your netwok
Internet<-->modem<->pc
My System SpecsSystem Spec
25 Apr 2012   #39
silverdee

Windows 7
 
 

@sibbil I can only uncheck IPv6 TCP/IP in local area connection properties. The uninstall option is greyed out and unclickable. I just finished watching a video about tunnel adapters and the guy said to look at the hidden devices underneath the network adapters. He then said to disable the 6to4adaptor and teredo tunneling pseudo interface? I've attached an image of my adapters. What is your take on it?

@vaidas3 Here are the results I got after I typed the arp -a


Quote:
Interface: 169.254.194.53 --- 0xe
Internet Address Physical Address Type
169.254.255.255 ff-ff-ff-ff-ff-ff static
224.0.0.22 01-00-5e-00-00-16 static
224.0.0.251 01-00-5e-00-00-fb static
224.0.0.252 01-00-5e-00-00-fc static
239.255.255.250 01-00-5e-7f-ff-fa static
255.255.255.255 ff-ff-ff-ff-ff-ff static
And I did a quick google search and my network does have a domain name. I would like to try the Internet<-->modem<->pc but I have voip and my family doesn't want to disconnect the phone.


Attached Images
No network acesss, ipv4 and ipv6 not connected-adapters.jpg 
My System SpecsSystem Spec
25 Apr 2012   #40
vaidas3

Windows 7 pro 64bit. (SP1)
 
 

Go to
Control Panel>Network and Internet>Network and Sharing Center and on the left side click change adapter settings how many adapters do you see?
form there try to disable and enable ethernet adapter


you did restart the router yes? restart usually takes about a minute in that time your ip phone was down isnt it?

it would be enough to test just for a minute connection without router and reconnect it back.

if you use only one pc at a time then try to do same configuration as it is on working pc. including dns suffix do it manually. you can find all the setings in tcp/ipv4 properities advanced settings.
My System SpecsSystem Spec
Reply

 No network acesss, ipv4 and ipv6 not connected




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Help! IPV4 IPV6 no network access
Hi. I hope I am posting in the correct place, I am a new member. When I connect to the internet I keep getting the message "no network access" And when I click properties I see the following: IPV4 no network access IPV6 no network access
Network & Sharing
Cable connected to modem, ipv6 no internet access ipv4 no network
Hello Guys, I've been searching for the past 2 days a solution, but nothing came up to work. Tried different things, nothing good yet. So I'm directly connected to a modem, cable, and well, my computer takes time to identify and then identifies it first a a public network (i was able to...
Network & Sharing
Ipv4 and Ipv6 not connected no more internet access!!
Hello everyone. I recently had a sound problem on the internet in google chrome ( no sound at all although the system sound worked fine) I contacted tech guru to solve that problem. The guy installed shockewave and reinstall chrome on my pc and reboot my pc all remotly. At this stage my problem...
Network & Sharing
Windows 7 - No network acesss, ipv4 and ipv6 not connected
Hi, I am on an aspire one netbook and can no longer connect to the internet via wireless or a wired connection. I typed ipconfig/all in command prompt and all i got was..: Host name . . . . . . . .. . . . .: Primary Dns Suffix . . . . . . . : Node Type. . . . . . . . . . . . .: Broadcast IP...
Network & Sharing
LAN Connection Problems ( Ipv4 and Ipv6: No Internet/Network Access)
Hello, today I woke up and there was no Internet on my computer. I have had this happen to me before so I did the usual, restart and reboot but it didn't work. So I have been researching on my phone for 3 hours now and nothing has helped me fix this. It will switch from " No network access" and "no...
Network & Sharing
IPV4 an IPV6 No Network Access
Hi all, I've been browsing the forum for a solution to this. I've tried uninstalling my network driver and installing again, i've no bonjour services and even tried uninstalling adobe cs5 but none worked.My wireless have internet connection on IPV4 if my Ethernet Adapter is connected to my...
Network & Sharing


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 20:06.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App