Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Netgear N300 Wireless Adapter Default Gateway is not Available

10 Jun 2012   #11
Chimpvanzee

Windows 7 Home Premium 64bit
 
 

Alright, I'll get started on the safe mode process.
I will grab my brother's laptop and use the ipconfig command on there and post it.
Thank you for being so patient, I really appreciate it.


My System SpecsSystem Spec
.
10 Jun 2012   #12
2xg

Win7 & Win8 64bit
 
 

Also, what type of AV or Security Software do you have installed?
My System SpecsSystem Spec
10 Jun 2012   #13
Chimpvanzee

Windows 7 Home Premium 64bit
 
 

Here's the ipconfig, I'll have the ping results up in a second.


Attached Images
Netgear N300 Wireless Adapter Default Gateway is not Available-ipconfig2.png Netgear N300 Wireless Adapter Default Gateway is not Available-ipconfig.png 
My System SpecsSystem Spec
.

10 Jun 2012   #14
Chimpvanzee

Windows 7 Home Premium 64bit
 
 

Here's the ping results.


Attached Images
Netgear N300 Wireless Adapter Default Gateway is not Available-ping.png 
My System SpecsSystem Spec
10 Jun 2012   #15
Chimpvanzee

Windows 7 Home Premium 64bit
 
 

I am using AVG Free and I disabled Windows Firewall from blocking connections.
My System SpecsSystem Spec
10 Jun 2012   #16
2xg

Win7 & Win8 64bit
 
 

You should enable your Windows Firewall back for protection, AVG won't be a culprit as far as I know.
My System SpecsSystem Spec
10 Jun 2012   #17
Chimpvanzee

Windows 7 Home Premium 64bit
 
 

Alright, Windows Firewall is back at recommended settings.
My System SpecsSystem Spec
10 Jun 2012   #18
2xg

Win7 & Win8 64bit
 
 

Did you ever try uninstall/reinstalling the device driver from Safe Mode in Networking?

Next task is resetting the winsock and TCP/IP stacks.
Click on Start=> All Programs => Accessories and right click on Command Prompt, select "Run as Administrator" to open a command prompt.
Reset IPv4 TCP/IP stack to installation defaults. netsh int ipv4 reset reset.log press enter
Reset IPv6 TCP/IP stack to installation defaults. netsh int ipv6 reset reset.log press enter
Reset WINSOCK entries to installation defaults: netsh winsock reset catalog press enter
Restart the computer after.

If that didn't work, try the sfc /scannow command by following Brink's Tutorial here.
My System SpecsSystem Spec
10 Jun 2012   #19
Chimpvanzee

Windows 7 Home Premium 64bit
 
 

Oh jeez, my apologies, I skipped that step by accident. Computer repair at 3 AM probably isn't the best idea, but I really need to fix this.
My System SpecsSystem Spec
10 Jun 2012   #20
2xg

Win7 & Win8 64bit
 
 

It's easy to overlook things especially if there are quite of troubleshooting guides to follow, no worries. You're 3 hours ahead of me btw...

Please don't forget to install the latest driver.
My System SpecsSystem Spec
Reply

 Netgear N300 Wireless Adapter Default Gateway is not Available




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Trying to setup ICS using Netgear WN111 Wireless USB adapter
Hi, I am trying to share my internet via the rangemax wireless adapter. I've read through a couple of guides but stumble at the same hurdle everytime... I do the following: Open "Network Connections" and right click on LAN connection. Then I select "Properties". In "Sharing" tab I click...
Network & Sharing
Issue with Netgear N300 wireless and dropping connection
Hi there, Recently bought an N300 wireless adapter for my PC. I have a normal router which I usually connect to the internet using an ethernet. But sometimes I go wireless. Initially it all worked wonderfully, without the ethernet my PC was able to pick up the wifi and I could browse,...
Network & Sharing
NetGear Wireless Adapter will not detect?
Greetings lads... I recently bypassed my previous BSOD issue by simply replacing my HDD with a SSD and doing a fresh install of Windows 7 64bit Pro. Where the computer is currently located, I need to run wireless internet. To do this, I have used a NetGear wireless adapter "WNDA3100v2". It's...
Hardware & Devices
Netgear Wireless-G USB Network Adapter
Hello, Having an issue getting this adapter to run smoothly in Windows 7 Ultimate x64. I have installed the driver from the site and it runs ok to a point: WG111 - NETGEAR.com - The install comes with Netgear wireless software that scans for the hotspot and I am able to connect to my home...
Installation & Setup
Netgear WG111 wireless adapter won't work with W7
I have read a number of other posts (here and elsewhere) about getting a WG111 to work with W7 on my new computer and haven't had any success. Can someone help by providing click-by-click directions? I'm not a complete novice but clearly not clever enough to follow the directions previously...
Drivers
Netgear WNDA3100 wireless adapter
I have just purchased a Windows 7 Home Premium PC and want to use the Netgear WNDA3100 wireless adapter to access my dual band n wireless network. Netgear doesn't have the drivers yet and can't tell me when they will have them. Anyone know of a dual band adapter that will work? :confused:
Drivers


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 15:58.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App