Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Unidentified Network


17 Jun 2012   #1

Windows 7 Ultimate X86
 
 
Unidentified Network

Hi, I just installed a copy of Windows 7 Ultimate, 32 bit version. I Immediately got Marvell Yukon 32-bit Windows 7 drivers, so I could connect to the internet. Unfortunately, I didn't copy the IP address and all that, so I went on my sister's laptop and got it from there. Everything worked fine, the IP was good, no errors. However, after actually saving the configuration, it gave me "Unidentified Network". I use broadband to connect to the internet, by the way, but I need the LAN configuration, so it works. Well, I can't figure out what to do. I tried reinstalling, updating drivers, rebooting, shutting down, nothing works. I can't even ipconfig/release and ipconfig/renew, because it says:


Windows IP Configuration


The operation failed as no adapter is in the state permissible for this operation.




What should I do?

IP Config@All


Quote:
C:\Users\Charlie>ipconfig/all

Windows IP Configuration

Host Name . . . . . . . . . . . . : Home
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

PPP adapter DIGI:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : DIGI
Physical Address. . . . . . . . . :
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv4 Address. . . . . . . . . . . : 172.17.113.171(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.255
Default Gateway . . . . . . . . . : 0.0.0.0
DNS Servers . . . . . . . . . . . : 193.231.236.30
193.231.236.25
Primary WINS Server . . . . . . . : 10.11.12.13
Secondary WINS Server . . . . . . : 10.11.12.14
NetBIOS over Tcpip. . . . . . . . : Disabled

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Marvell Yukon 88E8001/8003/8010 PCI Gigab
it Ethernet Controller
Physical Address. . . . . . . . . : 00-1A-4D-64-2B-F4
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::20fa:5fd4:c8e7:cdd3%15(Preferred)
IPv4 Address. . . . . . . . . . . : 82.76.25.181(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 82.76.25.1
DHCPv6 IAID . . . . . . . . . . . : 251664973
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-17-70-60-7B-00-1A-4D-64-2B-F4

DNS Servers . . . . . . . . . . . : 193.231.236.25
193.231.236.30
NetBIOS over Tcpip. . . . . . . . : Enabled

Tunnel adapter isatap.{37FED621-2950-470D-966F-103A7F3B8E5F}:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

Tunnel adapter 6TO4 Adapter:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft 6to4 Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv6 Address. . . . . . . . . . . : 2002:524c:19b5::524c:19b5(Preferred)
Default Gateway . . . . . . . . . : 2002:c058:6301::c058:6301
DNS Servers . . . . . . . . . . . : 193.231.236.25
193.231.236.30
NetBIOS over Tcpip. . . . . . . . : Disabled

Tunnel adapter isatap.{B86EFB41-8AAA-4130-9923-F155CA70842F}:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

Tunnel adapter Teredo Tunneling Pseudo-Interface:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

C:\Users\Charlie>


My System SpecsSystem Spec
.

17 Jun 2012   #2

Linux Mint 17 Cinnamon | Win 7 Ult x64
 
 

Hi, Welcome to Seven Forums

You can't use IPCONFIG /release and /renew because your Yukon ethernet connection is not using DHCP.

Is your router that you are connecting to set up for DHCP?

Write the addresses down, then go into Network and sharing centre and change the connection settings to use DHCP (Automatically obtain IP address, and the bottom one Automatically obtain DNS server addresses).

What is the PPP DIGI adapter used for? Do you use your computer in multiple locations?
My System SpecsSystem Spec
18 Jun 2012   #3

Windows 7 Ultimate X86
 
 

Quote   Quote: Originally Posted by TanyaC View Post
Hi, Welcome to Seven Forums

You can't use IPCONFIG /release and /renew because your Yukon ethernet connection is not using DHCP.

Is your router that you are connecting to set up for DHCP?

Write the addresses down, then go into Network and sharing centre and change the connection settings to use DHCP (Automatically obtain IP address, and the bottom one Automatically obtain DNS server addresses).

What is the PPP DIGI adapter used for? Do you use your computer in multiple locations?
No, it's a broadband internet that needs the LAN configuration to be done, else it won't work. I don't want to setup a DHCP. DIGI PPP = Internet stick which I'm using to post now, from my computer, as I don't have internet.
My System SpecsSystem Spec
.


18 Jun 2012   #4

Linux Mint 17 Cinnamon | Win 7 Ult x64
 
 

Ok, if you don't want to use DHCP - You want to have everything set to static.

I'm assuming your router configuration is correct and has not changed since you last had internet access working, and that you are NOT using NAT. To give you more help it would help to know more about your configuration.

What sort of router are you using? What sort of Broadband is it? DSL, CABLE, Hybrid... something else?


Are the username and password for your Internet connection that are in your router correct?

A traceroute on your gateway shows the traffic is being routed all over the world, and then dies in Bucharest. (See below).

Are you sure you are using the IP Address, gateway, and DNS servers assigned by your ISP?

Have your tried to reset your router?

Have you talked to your ISP about this?

Tanya

---

Tracing route to dr45.bucuresti.rdsnet.ro [82.76.25.1]
over a maximum of 30 hops:
1 27 ms 14 ms 13 ms 123-3-8-1.static.dsl.dodo.com.au [123.3.8.1]
2 14 ms 27 ms 20 ms 123-2-4-34.core.dodo.com.au [123.2.4.34]
3 15 ms 19 ms 17 ms 123-2-5-2.core.dodo.com.au [123.2.5.2]
4 15 ms 23 ms 35 ms Bundle-Ether11.win24.Melbourne.telstra.net [165.
228.21.137]
5 21 ms 23 ms 23 ms Bundle-Ether6.win-core1.melbourne.telstra.net [2
03.50.11.58]
6 46 ms 31 ms 39 ms Bundle-Pos3.ken-core4.Sydney.telstra.net [203.50
.11.12]
7 31 ms 31 ms 31 ms Bundle-Ether1.pad-gw2.Sydney.telstra.net [203.50
.6.29]
8 28 ms 31 ms 28 ms 203.50.13.158
9 181 ms 165 ms 176 ms i-0-3-0-0.paix-core01.bx.telstraglobal.net [202.
84.140.9]
10 181 ms 184 ms 177 ms i-0-0-0-0.eqnx-core01.bi.telstraglobal.net [202.
84.140.142]
11 188 ms 191 ms 179 ms i-1-1.eqnx02.bi.telstraglobal.net [202.84.251.85
]
12 176 ms 177 ms 175 ms l3-peer.eqnx02.pr.telstraglobal.net [134.159.62.
198]
13 177 ms 185 ms 189 ms vlan70.csw2.SanJose1.Level3.net [4.69.152.126]
14 177 ms 193 ms 183 ms ae-71-71.ebr1.SanJose1.Level3.net [4.69.153.5]
15 244 ms 258 ms 259 ms ae-2-2.ebr2.NewYork1.Level3.net [4.69.135.186]
16 246 ms 251 ms 247 ms ae-82-82.csw3.NewYork1.Level3.net [4.69.148.42]
17 252 ms 247 ms 243 ms ae-81-81.ebr1.NewYork1.Level3.net [4.69.134.73]
18 338 ms 313 ms 317 ms ae-43-43.ebr2.London1.Level3.net [4.69.137.73]
19 320 ms 320 ms 320 ms ae-47-47.ebr2.Amsterdam1.Level3.net [4.69.143.77
]
20 320 ms 327 ms 334 ms ae-1-100.ebr1.Amsterdam1.Level3.net [4.69.141.16
9]
21 332 ms 324 ms 324 ms ae-47-47.ebr2.Dusseldorf1.Level3.net [4.69.143.2
06]
22 344 ms 347 ms 336 ms 4.69.200.166
23 368 ms 366 ms 365 ms ae-8-8.car1.Bucharest1.Level3.net [4.69.141.29]
24 365 ms 423 ms 365 ms RCS-RDS-S.A.car1.Bucharest1.Level3.net [212.162.
45.42]
25 * * * Request timed out.
26 * * * Request timed out.
27 * * * Request timed out.
28 * * * Request timed out.
29 * * * Request timed out.
30 * * * Request timed out.
Trace complete.
My System SpecsSystem Spec
18 Jun 2012   #5

Windows 7 Ultimate X86
 
 

Quote   Quote: Originally Posted by TanyaC View Post
Ok, if you don't want to use DHCP - You want to have everything set to static.

I'm assuming your router configuration is correct and has not changed since you last had internet access working, and that you are NOT using NAT. To give you more help it would help to know more about your configuration.

What sort of router are you using? What sort of Broadband is it? DSL, CABLE, Hybrid... something else?


Are the username and password for your Internet connection that are in your router correct?

A traceroute on your gateway shows the traffic is being routed all over the world, and then dies in Bucharest. (See below).

Are you sure you are using the IP Address, gateway, and DNS servers assigned by your ISP?

Have your tried to reset your router?

Have you talked to your ISP about this?

Tanya

---

Tracing route to dr45.bucuresti.rdsnet.ro [82.76.25.1]
over a maximum of 30 hops:
1 27 ms 14 ms 13 ms 123-3-8-1.static.dsl.dodo.com.au [123.3.8.1]
2 14 ms 27 ms 20 ms 123-2-4-34.core.dodo.com.au [123.2.4.34]
3 15 ms 19 ms 17 ms 123-2-5-2.core.dodo.com.au [123.2.5.2]
4 15 ms 23 ms 35 ms Bundle-Ether11.win24.Melbourne.telstra.net [165.
228.21.137]
5 21 ms 23 ms 23 ms Bundle-Ether6.win-core1.melbourne.telstra.net [2
03.50.11.58]
6 46 ms 31 ms 39 ms Bundle-Pos3.ken-core4.Sydney.telstra.net [203.50
.11.12]
7 31 ms 31 ms 31 ms Bundle-Ether1.pad-gw2.Sydney.telstra.net [203.50
.6.29]
8 28 ms 31 ms 28 ms 203.50.13.158
9 181 ms 165 ms 176 ms i-0-3-0-0.paix-core01.bx.telstraglobal.net [202.
84.140.9]
10 181 ms 184 ms 177 ms i-0-0-0-0.eqnx-core01.bi.telstraglobal.net [202.
84.140.142]
11 188 ms 191 ms 179 ms i-1-1.eqnx02.bi.telstraglobal.net [202.84.251.85
]
12 176 ms 177 ms 175 ms l3-peer.eqnx02.pr.telstraglobal.net [134.159.62.
198]
13 177 ms 185 ms 189 ms vlan70.csw2.SanJose1.Level3.net [4.69.152.126]
14 177 ms 193 ms 183 ms ae-71-71.ebr1.SanJose1.Level3.net [4.69.153.5]
15 244 ms 258 ms 259 ms ae-2-2.ebr2.NewYork1.Level3.net [4.69.135.186]
16 246 ms 251 ms 247 ms ae-82-82.csw3.NewYork1.Level3.net [4.69.148.42]
17 252 ms 247 ms 243 ms ae-81-81.ebr1.NewYork1.Level3.net [4.69.134.73]
18 338 ms 313 ms 317 ms ae-43-43.ebr2.London1.Level3.net [4.69.137.73]
19 320 ms 320 ms 320 ms ae-47-47.ebr2.Amsterdam1.Level3.net [4.69.143.77
]
20 320 ms 327 ms 334 ms ae-1-100.ebr1.Amsterdam1.Level3.net [4.69.141.16
9]
21 332 ms 324 ms 324 ms ae-47-47.ebr2.Dusseldorf1.Level3.net [4.69.143.2
06]
22 344 ms 347 ms 336 ms 4.69.200.166
23 368 ms 366 ms 365 ms ae-8-8.car1.Bucharest1.Level3.net [4.69.141.29]
24 365 ms 423 ms 365 ms RCS-RDS-S.A.car1.Bucharest1.Level3.net [212.162.
45.42]
25 * * * Request timed out.
26 * * * Request timed out.
27 * * * Request timed out.
28 * * * Request timed out.
29 * * * Request timed out.
30 * * * Request timed out.
Trace complete.
I'm using cable broadband, I think. Also, the IP, username and password should be good, because they work for my sister's laptop, so it's pretty strange. I haven't talked to the ISP though and I'll ask my mother to call them today. I can't, due being 13, unfortunately and they'd take me for a fool.

Also, after installing windows 7, the internet never worked, so I'm not sure the configuration is correct, but it should be, since it works for my sister's laptop, shouldn't it?

Also, I'm not sure what you mean by router, isn't a router used in wireless? If you mean modem, then no, I haven't tried resetting it, I don't know how.
My System SpecsSystem Spec
18 Jun 2012   #6

Windows 7 Ultimate X86
 
 

I'll get the IP, gateway and all that from the ISP today and tell you the results after, if any.
My System SpecsSystem Spec
18 Jun 2012   #7

Linux Mint 17 Cinnamon | Win 7 Ult x64
 
 

Hi,

You could also take a look at Dinesh's fine Internet troublsooting guide ...

Internet Troubleshooting Guide
My System SpecsSystem Spec
18 Jun 2012   #8

Windows 7 Ultimate X86
 
 

Quote   Quote: Originally Posted by TanyaC View Post
Hi,

You could also take a look at Dinesh's fine Internet troublsooting guide ...

Internet Troubleshooting Guide
I called a friend which also has Windows 7 Ultimate and it happened to him as well. He told me he updated windows 7, with the updates microsoft gave and it worked. Automatic updates, as it is in XP. I went in Windows updates and saw I have 114 updates to install. I started installing em now and will try when I come back from school. Hopefully that'll fix it.
My System SpecsSystem Spec
18 Jun 2012   #9

Windows 7 Ultimate X86
 
 

It didn't work unfortunately, with the updates. I'll get the address' that the ISP gives me and I'll give you an update.
My System SpecsSystem Spec
18 Jun 2012   #10

Windows 7 Ultimate X86
 
 

Any suggestions, until that happens?
My System SpecsSystem Spec
Reply

 Unidentified Network




Thread Tools




Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 11:10 AM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33