Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: DHCP is On in Router off in Windows

13 Sep 2009   #21
Barman58

Windows 10 Pro x64 x2 Windows 10 Enterprise x64, Ubuntu
 
 

What I would Suggest in this situation is that you try, as a test, changing your DNS servers from those of your ISP to an independent.

The reason for this is that ISP DNS servers are often less than reliable

Open DNS is a good one to try https://www.opendns.com/start/

enter the following information manually into your router

Primary DNS
208.67.222.222

and if applicable
Secondary DNS
208.67.220.220

In your PC set your fixed IP address and also set the DNS address to your router address or it can be set to the above Open DNS servers.

Due to your location this may be less than Ideal as the majority of DNS servers available are US and Europe based although they do have locations in Australia.

If this gives you a more stable connection I would then investigate any freely available DNS servers more local to you.


My System SpecsSystem Spec
.
13 Sep 2009   #22
Gazzasore

,Windows 7-64.7600.16385 Ultimate
 
 

Well I have had all sorts of dramas while I as changing the settings the Internet went out due to heavy rain
While it out I changed the settings then I couldn't get back on again

Now it wont let me have a fixed Ip address

I think tomorrow I will reset my router back to factory and manually reconfigure

I am back on now it is running OK But

When windows wont let you change something that you should be able to something must be wrong
It is very important to have it right as our phone works through it too
Cheers Barman
My System SpecsSystem Spec
13 Sep 2009   #23
zigzag3143

Win 8 Release candidate 8400
 
 

we'll be here. Let us know if we can help
My System SpecsSystem Spec
.

13 Sep 2009   #24
Gazzasore

,Windows 7-64.7600.16385 Ultimate
 
 

Cheers

I have taken Snip Pic's with the snipit tool

So should be easy enough
Its the Voip side that can be difficult settings just dont seem to work then if you change the way you hold your mouth it all seems to work
My System SpecsSystem Spec
Reply

 DHCP is On in Router off in Windows




Thread Tools




Similar help and support threads
Thread Forum
Router DHCP IP Range Question
I am trying to use a Netgear WNR3500 wireless as a wireless access point on my network. I have attached two screenshots from the main 2WIRE AT&T U-Verse wireless router. I am trying to determine the DHCP IP range of the 2WIRE AT&T router. Screenshot #1 shows Status under the LAN tab: Private...
Network & Sharing
DHCP DNS problems with Speed touch router on BT Broadband
I'm a BT broadband customer and have configured my speedtouch wireless router to connect to the internet instead of that appology called the homehub. On my old Dell Latidude D630 laptop with windows XP pro, it gets a DHCP address and DNS settings from the router. Everything works nice and fast...
Network & Sharing
ics not broadcasting dhcp to router wan port
Greeting, I'm having problems setting up a ICS route in win 7 the same procedure worked fine in XP. I have a dual boot win xp pro, win 7 pro x64 system. The internet chain consists of a 3g modem (ics) <-> gigbit nic ip (192.168.0.1 in XP) (192.168.137.1 in win7 pro)<-> wan port of a dd-wrt...
Network & Sharing
DHCP not working after Windows 7 Upgrade
Hi, I have a machine that used to run Windows Vista Home Premium, and it is connected to a LinkSys router using DHCP. It worked fine. Also, I have a Windows 7 Ultimate laptop that connects to the same router using DHCP, it works fine too. Today I upgraded the Vista machine to Windows 7. After...
Network & Sharing
dns & dhcp not working in windows
after i upgraded vista to windows 7, i now have a problem that my internet is not working,i can ping external ips but no address resolution and if i made the connection to auto ip ...doesn't work.so that's dhcp & dns are not working.when i check in the services.msc the dhcp and dns services are...
Network & Sharing
New features in DHCP for Windows Server 2008 R2 / Windows 7
more: Bink.nu
News


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 18:11.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App