Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: DHCP is On in Router off in Windows

06 Sep 2009   #1
Gazzasore

,Windows 7-64.7600.16385 Ultimate
 
 
DHCP is On in Router off in Windows

Hi All
DHCP is on in Router off in Windows

Does anyone know how to have it turned on in windows

See below

Windows IP Configuration
Host Name . . . . . . . . . . . . : Gazza-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller
Physical Address. . . . . . . . . : 00-1F-D0-54-E6-5C
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::21f:d0ff:fe54:e65c%11(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.1.10(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.254
DHCPv6 IAID . . . . . . . . . . . : 234889168
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-12-28-EB-D0-00-1F-D0-54-E6-5C
DNS Servers . . . . . . . . . . . : 208.67.222.222
NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter isatap.{7D7ED826-54EB-4F3A-8753-A4398B264D1B}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 9:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv6 Address. . . . . . . . . . . : 2001:0:4137:9e50:34d3:27b9:82e5:73ed(Preferred)
Link-local IPv6 Address . . . . . : fe80::34d3:27b9:82e5:73ed%13(Preferred)
Default Gateway . . . . . . . . . : ::
NetBIOS over Tcpip. . . . . . . . : Disabled

I was wondering if this could be a cause of the interment getting kicked from the net (Router loosing DNS)


My System SpecsSystem Spec
06 Sep 2009   #2
mickey megabyte

ultimate 64 sp1
 
 

do you have the DHCP Client service running? (check services.msc)

and turn off IPv6, unless you really need it.
My System SpecsSystem Spec
06 Sep 2009   #3
Gazzasore

,Windows 7-64.7600.16385 Ultimate
 
 

I cant find services.msc is it called something else ?

Woops sorry found it DHCP Client service, yes its turned on
My System SpecsSystem Spec
06 Sep 2009   #4
kegobeer

Windows 7 Ultimate x64 SP1
 
 

Did you set up a static IP for the computer? If so, switch back to Obtain an IP address automatically and Obtain DNS server address automatically.
My System SpecsSystem Spec
06 Sep 2009   #5
Gazzasore

,Windows 7-64.7600.16385 Ultimate
 
 

Yes set up a static IP for the computer
I have switched it back DHCP working now thanks

The reason why I set up a static IP address is because it changes its self So my virtual servers need to changed all the time to keep up with the changes I will try it again for while and see what happens
My System SpecsSystem Spec
06 Sep 2009   #6
kegobeer

Windows 7 Ultimate x64 SP1
 
 

Quote   Quote: Originally Posted by Gazzasore View Post
Yes set up a static IP for the computer
I have switched it back DHCP working now thanks

The reason why I set up a static IP address is because it changes its self So my virtual servers need to changed all the time to keep up with the changes I will try it again for while and see what happens
Some routers allow you to permanently assign an IP address to a MAC address. In my DIR-655, it's under the DHCP reservation list. See if your router has that functionality.
My System SpecsSystem Spec
06 Sep 2009   #7
Gazzasore

,Windows 7-64.7600.16385 Ultimate
 
 

Yes it does have this function But I don't know how to configure it


Attached Thumbnails
-capture33.png  
My System SpecsSystem Spec
06 Sep 2009   #8
kegobeer

Windows 7 Ultimate x64 SP1
 
 

That's not a DHCP reservation list, as far as I can tell. What's the model number of your router?
My System SpecsSystem Spec
06 Sep 2009   #9
Gazzasore

,Windows 7-64.7600.16385 Ultimate
 
 

Billion 7404vgpm


Attached Thumbnails
-snip-snip.png   -snip-snip-snip.png   -snips.png  
My System SpecsSystem Spec
06 Sep 2009   #10
kegobeer

Windows 7 Ultimate x64 SP1
 
 

Look in the manual on pages 22 and 23 - it discusses the DHCP table. Find the section about the permanent table - it's talking about MAC mapping, which is the same thing as DHCP reservation. Somewhere in your router's config pages you should be able to assign an IP to a MAC address.
My System SpecsSystem Spec
Reply

 DHCP is On in Router off in Windows




Thread Tools





Similar help and support threads
Thread Forum
Router DHCP IP Range Question
I am trying to use a Netgear WNR3500 wireless as a wireless access point on my network. I have attached two screenshots from the main 2WIRE AT&T U-Verse wireless router. I am trying to determine the DHCP IP range of the 2WIRE AT&T router. Screenshot #1 shows Status under the LAN tab: Private...
Network & Sharing
DHCP DNS problems with Speed touch router on BT Broadband
I'm a BT broadband customer and have configured my speedtouch wireless router to connect to the internet instead of that appology called the homehub. On my old Dell Latidude D630 laptop with windows XP pro, it gets a DHCP address and DNS settings from the router. Everything works nice and fast...
Network & Sharing
ics not broadcasting dhcp to router wan port
Greeting, I'm having problems setting up a ICS route in win 7 the same procedure worked fine in XP. I have a dual boot win xp pro, win 7 pro x64 system. The internet chain consists of a 3g modem (ics) <-> gigbit nic ip (192.168.0.1 in XP) (192.168.137.1 in win7 pro)<-> wan port of a dd-wrt...
Network & Sharing
DHCP not working after Windows 7 Upgrade
Hi, I have a machine that used to run Windows Vista Home Premium, and it is connected to a LinkSys router using DHCP. It worked fine. Also, I have a Windows 7 Ultimate laptop that connects to the same router using DHCP, it works fine too. Today I upgraded the Vista machine to Windows 7. After...
Network & Sharing
dns & dhcp not working in windows
after i upgraded vista to windows 7, i now have a problem that my internet is not working,i can ping external ips but no address resolution and if i made the connection to auto ip ...doesn't work.so that's dhcp & dns are not working.when i check in the services.msc the dhcp and dns services are...
Network & Sharing
New features in DHCP for Windows Server 2008 R2 / Windows 7
more: Bink.nu
News

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 15:23.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App