Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Can't connect to wireless network


11 Sep 2009   #1

Windows 7 RC
 
 
Can't connect to wireless network

Since I installed Win 7 I am unable to connect to my wireless network.

IP is Roadrunner and my wireless router is Linksys model WRT110.

When running ipconfig from prompt it states the following:

Wireless LAN adapter Wireless Network Connection:

Media State . . . . . . . . . . . : Media disconnected

Please help.

My System SpecsSystem Spec
.

11 Sep 2009   #2

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by jasonfoos View Post
Since I installed Win 7 I am unable to connect to my wireless network.

IP is Roadrunner and my wireless router is Linksys model WRT110.

When running ipconfig from prompt it states the following:

Wireless LAN adapter Wireless Network Connection:

Media State . . . . . . . . . . . : Media disconnected

Please help.
JF

Hi and welcome to seven forums

Probably just a driver issue. could you go into device manager (type device in search) and look at the network devices. You should have a NIC (for wired) and a wireless (wifi). Are both listed and working, or is there an unknown device with a yellow triangle?

Ken
My System SpecsSystem Spec
11 Sep 2009   #3

Windows 7 RC
 
 

Hi Ken,

I looked at the device manager. I didn't see any search tool.

Looked under Network adapters. I see 802.11n Wireless LAN Card.

The properties say that this device is working properly. I tried to update the driver. There were no available updates.
My System SpecsSystem Spec
.


11 Sep 2009   #4

Win 8 Release candidate 8400
 
 

Quote   Quote: Originally Posted by jasonfoos View Post
Hi Ken,

I looked at the device manager. I didn't see any search tool.

Looked under Network adapters. I see 802.11n Wireless LAN Card.

The properties say that this device is working properly. I tried to update the driver. There were no available updates.
OK so device manager looks like this one with two working devices. Could you try type cmd in search then ipconfig /flushdns, enter. then ipconfig /renew, enter

Ken
My System SpecsSystem Spec
11 Sep 2009   #5

Windows 7 RC
 
 

Hi Ken,

My device manager looks like this:

[IMG]file:///C:/Users/Jason/AppData/Local/Temp/msohtml1/01/clip_image002.jpg[/IMG]

I noticed the Microsft Virtual WiFi Miniport Adapter. The device is working properly but there is an update for the driver. However, it is not signed by windows. Should I install this?
My System SpecsSystem Spec
11 Sep 2009   #6

Windows 7 RC
 
 

BTW, the ipconfig /flushdns, enter. then ipconfig /renew, enter did not work.
My System SpecsSystem Spec
11 Sep 2009   #7

Win 7 RTM 7600 Ultimate 64-bit
 
 

In a related vein I upgraded a computer to Win 7 x64 that contained a wireless NIC as well. Win 7 identified it similar to yours as "802.11n Wireless LAN Card" which I knew to be incorrect since the card is definitely an 802.11g card, no N capability.

So Win 7 was thinking it to be a 802.11n card, and in fact it appeared to be working, but did not actually transfer packets.

So I simply installed the correct driver from the manufacturer and resolved the issue.

I'd recommend you get a good driver from HP and install it. If they do not provide a Win 7 driver yet you can try the Vista driver if one is available then the XP driver.
My System SpecsSystem Spec
11 Sep 2009   #8

Win 8 Release candidate 8400
 
 

As I first said 99.99% of the time its a driver. As rusty falcon said get the driver from the computers mfr and install it (over if necesssary) in device manger. You may have to install in compatibility mode if it is a vista driver, and might need to install as admin.

I dont know if you are 32bit or 64, so just make sure you get the correct version

Ken
My System SpecsSystem Spec
11 Sep 2009   #9

 
 

I would suggest rebooting the router. As simple as it sounds this has helped in many cases i've seen before.
information   Information
Most routers have a small reset button on the back that needs to be depressed with a small sharp object (pen) for 5 seconds after the power has been disconnected/switched off.

Once done, your router will restart & run a self test, then connection test, then is ready to go.
Tip   Tip
Reeboots can take up-to 2 minutes, Refer to your user manual on exact reboot procedure

Hope this helps


OS
My System SpecsSystem Spec
12 Sep 2009   #10

Windows 7 RC
 
 

Hi,

I have done the reboot thing before, no luck. Same results.

Right now I am trying to re-install drivers for the wireless.

Having some trouble finding them on the HP website but I'll keep plugging away.

Thanks everyone for all the help.

If you have any other idea please let me know.

Thanks again.

Jason
My System SpecsSystem Spec
Reply

 Can't connect to wireless network




Thread Tools



Similar help and support threads for2: Can't connect to wireless network
Thread Forum
Can't connect to wireless network Network & Sharing
Wireless Won't Connect to Network?! General Discussion
Can see wireless network but won't connect Network & Sharing
Solved Can not connect to wireless network Network & Sharing
Can see wireless network but can't connect Network & Sharing
Win 7 Won't Connect To My Wireless Network, Mac OS Does Network & Sharing
Cant connect to wireless network Network & Sharing

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 02:16 AM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33