Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: how to delete bonjour file and fix the network problems?

15 Aug 2012   #61
abuh11

MS Windows 7 Home Premium 64-bit SP1
 
 

Quote   Quote: Originally Posted by karlsnooks View Post
If you:
Power off the computer.
Disconnect any ethernet cable and any router.
Power up your computer.
Do NOT try to connect to the internet.

Now how long is the start up time?

After that determination, you can reconnect.
Here is my start up time with internet connection

How long pc takes to load before it connects to the internet: 1:38


How long it takes to load after it connects to the internet: 3.37


Here is my start-up time with no internet (Ethernet pulled out as you suggested): 1:23


Here is ipconfig

Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

C:\Windows\system32>ipconfig

Windows IP Configuration


Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
Link-local IPv6 Address . . . . . : fe80::498f:248a:ec7:c6a5%11
IPv4 Address. . . . . . . . . . . : 192.168.0.39
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.0.2

Tunnel adapter isatap.{1291DE7D-A7E2-4828-B2A5-BAB4E5B6E23F}:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :

Tunnel adapter Local Area Connection* 11:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :

C:\Windows\system32>
C:\Windows\system32>







However I have got some more news that could maybe shed some light on the situation.

When my pc started with the Ethernet in, I went into the network adapter and disabled it, after this my internet began to work (although I still had to wait ages, I did not have to pull out Ethernet and put it back in again). So I restarted the pc to see if this will work again, but it didn’t, so I went into the network adepter and enabled it, and the same thing happened, I restarted the pc to see if this will work, but it did not, so I went back in the network adapter and disabled it again, and the story starts all over again. Do you think this could be part of the problem.


My System SpecsSystem Spec
.
15 Aug 2012   #62
gregrocker

 

Is there a newer driver for Ethernet Adapter cued in optional Windows Updates, or if you click on it in Device manager to Update driver?

What other listings are there under Network Adapters in Device Manager?

Did you flush the DNS using the batch file I posted earlier?

Quote   Quote: Originally Posted by gregrocker View Post

Copy and paste these lines in Note pad.

@Echo on
pushd\windows\system32\drivers\etc
attrib -h -s -r hosts
echo 127.0.0.1 localhost>HOSTS
attrib +r +h +s hosts
popd
ipconfig /release
ipconfig /renew
ipconfig /flushdns
netsh winsock reset all
netsh int ip reset all
shutdown -r -t 1
del %0


Save as flush.bat to your desktop.
Right click the .bat file and choose to run as Administrator. Your computer will reboot itself.
My System SpecsSystem Spec
15 Aug 2012   #63
karlsnooks

MS Windows 7 Ultimate SP1 64-bit
 
 

abuh,
after carrying out the .bat file that greg gave, then you need to 100% and fully update your Win 7 and here is how:
UPDATING YOUR WIN 7
1. ASSURE THAT YOU RECEIVE ALL UPDATES
WIN | type WINDOWS UPDATE | ENTER |
Change settings (left-hand column) |
checkmark all four of the boxes | OK
button

Approve any dialog boxes presented. Let Windows install any update features.

WIN is the key with the Microsoft flag on top.

2. INSTALL CRITICAL UPDATES
Check for Updates
(left-hand column)
Install ALL critical updates.
Restart your computer (even if not prompted)

Repeat this procedure until there are no more critical updates.

DO NOT TRUST the “Windows is up to date” in center of dialog. until you see that TWICE IN A ROW!

3. INSTALL IMPORTANT UPDATES
Use the “critical update” procedure until all important updates are installed.

4. INSTALL OPTIONAL UPDATES
Under Optional updates you will be presented with:
a) Microsoft Bing Desktop which is of questionable value
b) a list of about 34 language updates.

You can hide those updates so that aren't continually notified of those updates.
When you click on 34+ optional updates are available, then you
a) highlight all of the language updates,
b) right-click anywhere in the highlighted list.
c) click on Hide Updates,
d) OK button.
Install ALL other Optional Updates.
Use the “critical update” procedure.

UPDATE GOLDEN RULES

Install ALL, yes, ALL updates.
This is Win 7 and not Vista or XP (eXPired).

UPDATE IS HUNG –TAKING FOREVER
Hung is very doubtful unless you interrupted updates.

CTRL + SHIFT + ESC key combo will pop-up the Task Manager.
Lo and behold, Windows Update is still running!

You hold down the CTRL and SHIFT keys.
While holding them down, tap the ESC key once.
My System SpecsSystem Spec
.

16 Aug 2012   #64
abuh11

MS Windows 7 Home Premium 64-bit SP1
 
 

Quote   Quote: Originally Posted by gregrocker View Post
Is there a newer driver for Ethernet Adapter cued in optional Windows Updates, or if you click on it in Device manager to Update driver?

What other listings are there under Network Adapters in Device Manager?

Did you flush the DNS using the batch file I posted earlier?

Quote   Quote: Originally Posted by gregrocker View Post

Copy and paste these lines in Note pad.

@Echo on
pushd\windows\system32\drivers\etc
attrib -h -s -r hosts
echo 127.0.0.1 localhost>HOSTS
attrib +r +h +s hosts
popd
ipconfig /release
ipconfig /renew
ipconfig /flushdns
netsh winsock reset all
netsh int ip reset all
shutdown -r -t 1
del %0


Save as flush.bat to your desktop.
Right click the .bat file and choose to run as Administrator. Your computer will reboot itself.


There is no new driver for my Ethernet port, only one for bing desktop and my gtx 560. My network adapter already has the latest updates, there is one listing under it in device manger and that is "Realteck PCIe GBE family controller" . yes i did flush the DNS using that bacthc file, i think it made my internet load up faster, but i still have to pull out Ethernet and put it back in again for the internet to work.
My System SpecsSystem Spec
16 Aug 2012   #65
abuh11

MS Windows 7 Home Premium 64-bit SP1
 
 

Quote   Quote: Originally Posted by karlsnooks View Post
abuh,
after carrying out the .bat file that greg gave, then you need to 100% and fully update your Win 7 and here is how:
UPDATING YOUR WIN 7
1. ASSURE THAT YOU RECEIVE ALL UPDATES
WIN | type WINDOWS UPDATE | ENTER |
Change settings (left-hand column) |
checkmark all four of the boxes | OK
button

Approve any dialog boxes presented. Let Windows install any update features.

WIN is the key with the Microsoft flag on top.

2. INSTALL CRITICAL UPDATES
Check for Updates
(left-hand column)
Install ALL critical updates.
Restart your computer (even if not prompted)

Repeat this procedure until there are no more critical updates.

DO NOT TRUST the “Windows is up to date” in center of dialog. until you see that TWICE IN A ROW!

3. INSTALL IMPORTANT UPDATES
Use the “critical update” procedure until all important updates are installed.

4. INSTALL OPTIONAL UPDATES
Under Optional updates you will be presented with:
a) Microsoft Bing Desktop which is of questionable value
b) a list of about 34 language updates.

You can hide those updates so that aren't continually notified of those updates.
When you click on 34+ optional updates are available, then you
a) highlight all of the language updates,
b) right-click anywhere in the highlighted list.
c) click on Hide Updates,
d) OK button.
Install ALL other Optional Updates.
Use the “critical update” procedure.

UPDATE GOLDEN RULES

Install ALL, yes, ALL updates.
This is Win 7 and not Vista or XP (eXPired).

UPDATE IS HUNG –TAKING FOREVER
Hung is very doubtful unless you interrupted updates.

CTRL + SHIFT + ESC key combo will pop-up the Task Manager.
Lo and behold, Windows Update is still running!

You hold down the CTRL and SHIFT keys.
While holding them down, tap the ESC key once.

i have done all you procedures, however i already have the latest updates, also i don't understand the last part you are talking about the control alt delete part, can you please explain that again.
My System SpecsSystem Spec
16 Aug 2012   #66
Layback Bear

Windows 7 Pro. 64/SP-1
 
 

Abuh. Karl has just given you two ways to open Task Manager so you can see what application and other things that are running on your computer. Have you tried those keyboard tricks? If Windows Up Dates is running you can see it there.
My System SpecsSystem Spec
16 Aug 2012   #67
karlsnooks

MS Windows 7 Ultimate SP1 64-bit
 
 

Since you have installed all updates then:
run the following script and upload the resulting .TXT files that are placed o your desktop.


**********************INSTRUCTIONS**************************
# STEP 1 ** RUN POWERSHELL AS ADMINISTRATOR ******************
# ************************************************************
#
# WIN key | type POWERSHELL | do NOT hit ENTER |
# in the PROGRAMS list, right-click on WINDOWS POWERSHELL |
# choose "Run as administrator" |
# Click on the YES button (if such appears)
#
# WIN key = key with Microsoft log on top
#
# for the guru:
# WIN | type POWERSHELL | CTRL+SHIFT+ENTER key combo | ALT+Y keycombo
# ************************************************************
# STEP 2 ** COPY AND PASTE ***********************************
# ************************************************************
#
# COPY the script using CTRL+C,
# COPY every line of script down thru both EXIT statements
#
# PASTE into Powershell
#----Right-Click at the PowerShell Prompt
#----(Ctrl+V does not work)
#
# Start copying with first script line without a # at start of the line
# Note: Actually, you can paste the entire file if you rather
#-------Lines starting with a # are ignored by PowerShell
# ************************************************************
# STEP 3 ** SCRIPT OUTPUT & SCRIPT PURPOSE *******************
# ************************************************************
# --The script output and purpose is given at the very front of the script
#
# --The script output and purpose is given at the very front of the script
#
# ************************************************************
# ***************** NOTE - POWERSHELL VERSION*****************
# if you receive this error msg:
#--The system can not find the path specified
# you may need to update your PowerShell
# you must be using Powershell 2.0 or later.
#
# To determine your Powershell version:
#---Run PowerShell
#---enter $host.version
#---you should see at least:
# Major Minor Build Revision
# ----- ----- ----- --------
# 2......0......-1.....-1
#
# If you do not see the above, update your Vista/Win 7.
# ************************************************************
# *************** NOTE - EXECUTION POLICY*********************
# If you haven't set the execution policy, you may need to:
#---Run PowerShell
#---enter SET-EXECUTIONPOLICY -EXECUTIONPOLICY REMOTESIGNED
# ************************************************************

Script:
# ************************************************************
# Places InstalledUpdates.txt on your DESKTOP
# Places NotInstalledUpdates.TXT on your DESKTOP
#
# Hidden updates are ignored.
# ************************************************************

Try
{
   
$error.clear()
   
$file "$env:userprofile\Desktop\InstalledUpdates.TXT"
   
If (test-path -path $file) {del $file}
   
$update = new-object -com Microsoft.update.Session
   $searcher 
$update.CreateUpdateSearcher()
   
write-host "`n`n Patience. I'm slowly, but steadily working on fetching the list of installed updates.`n`n"
   
$pending $searcher.Search("IsInstalled=1"
   foreach(
$entry in $pending.Updates) {
     IF (
$entry.IsHidden -ne $true) {
       
"Title: " $entry.Title Out-file -append $File
       
"Downloaded? " $entry.IsDownloaded Out-file -append $File
       
"Description: " $entry.Description Out-file -append $File
       
foreach($category in $entry.Categories) {
           
$d "Category: " $category.name Out-file -append $File }
       
"" Out-file -append $file } }
   If ((
Test-Path -path $file) -eq $false) {"No updates have been installed." Out-file $file
# Now to check the uninstalled updates that aren't hidden
   
$file "$env:userprofile\Desktop\NotInstalledUpdates.TXT"
   
If (test-path -path $file) {del $file}
   
$update = new-object -com Microsoft.update.Session
   $searcher 
$update.CreateUpdateSearcher()
   
write-host "`n`n Patience. I'm slowly, but steadily working on fetching the list of uninstalled updates.`n`n"
   
$pending $searcher.Search("IsInstalled=0"
   foreach(
$entry in $pending.Updates) {
   IF (
$entry.IsHidden -ne $true) {
       
"Title: " $entry.Title Out-file -append $File
       
"Downloaded? " $entry.IsDownloaded Out-file -append $File
       
"Description: " $entry.Description Out-file -append $File
       
foreach($category in $entry.Categories) {
         
$d "Category: " $category.name Out-file -append $File }
       
"" Out-file -append $file } }
   If (-
not(Test-Path -path -$file)) {"There are no uninstalled updates which are unhidden." Out-file $file
}
Catch { 
"Unable to fetch update list from Microsoft site" }
Finally "End of script"; EXIT }

EXIT
EXIT 
My System SpecsSystem Spec
16 Aug 2012   #68
abuh11

MS Windows 7 Home Premium 64-bit SP1
 
 

Quote   Quote: Originally Posted by karlsnooks View Post
Since you have installed all updates then:
run the following script and upload the resulting .TXT files that are placed o your desktop.


**********************INSTRUCTIONS**************************
# STEP 1 ** RUN POWERSHELL AS ADMINISTRATOR ******************
# ************************************************************
#
# WIN key | type POWERSHELL | do NOT hit ENTER |
# in the PROGRAMS list, right-click on WINDOWS POWERSHELL |
# choose "Run as administrator" |
# Click on the YES button (if such appears)
#
# WIN key = key with Microsoft log on top
#
# for the guru:
# WIN | type POWERSHELL | CTRL+SHIFT+ENTER key combo | ALT+Y keycombo
# ************************************************************
# STEP 2 ** COPY AND PASTE ***********************************
# ************************************************************
#
# COPY the script using CTRL+C,
# COPY every line of script down thru both EXIT statements
#
# PASTE into Powershell
#----Right-Click at the PowerShell Prompt
#----(Ctrl+V does not work)
#
# Start copying with first script line without a # at start of the line
# Note: Actually, you can paste the entire file if you rather
#-------Lines starting with a # are ignored by PowerShell
# ************************************************************
# STEP 3 ** SCRIPT OUTPUT & SCRIPT PURPOSE *******************
# ************************************************************
# --The script output and purpose is given at the very front of the script
#
# --The script output and purpose is given at the very front of the script
#
# ************************************************************
# ***************** NOTE - POWERSHELL VERSION*****************
# if you receive this error msg:
#--The system can not find the path specified
# you may need to update your PowerShell
# you must be using Powershell 2.0 or later.
#
# To determine your Powershell version:
#---Run PowerShell
#---enter $host.version
#---you should see at least:
# Major Minor Build Revision
# ----- ----- ----- --------
# 2......0......-1.....-1
#
# If you do not see the above, update your Vista/Win 7.
# ************************************************************
# *************** NOTE - EXECUTION POLICY*********************
# If you haven't set the execution policy, you may need to:
#---Run PowerShell
#---enter SET-EXECUTIONPOLICY -EXECUTIONPOLICY REMOTESIGNED
# ************************************************************

Script:
# ************************************************************
# Places InstalledUpdates.txt on your DESKTOP
# Places NotInstalledUpdates.TXT on your DESKTOP
#
# Hidden updates are ignored.
# ************************************************************

Try
{
   
$error.clear()
   
$file "$env:userprofile\Desktop\InstalledUpdates.TXT"
   
If (test-path -path $file) {del $file}
   
$update = new-object -com Microsoft.update.Session
   $searcher 
$update.CreateUpdateSearcher()
   
write-host "`n`n Patience. I'm slowly, but steadily working on fetching the list of installed updates.`n`n"
   
$pending $searcher.Search("IsInstalled=1"
   foreach(
$entry in $pending.Updates) {
     IF (
$entry.IsHidden -ne $true) {
       
"Title: " $entry.Title Out-file -append $File
       
"Downloaded? " $entry.IsDownloaded Out-file -append $File
       
"Description: " $entry.Description Out-file -append $File
       
foreach($category in $entry.Categories) {
           
$d "Category: " $category.name Out-file -append $File }
       
"" Out-file -append $file } }
   If ((
Test-Path -path $file) -eq $false) {"No updates have been installed." Out-file $file
# Now to check the uninstalled updates that aren't hidden
   
$file "$env:userprofile\Desktop\NotInstalledUpdates.TXT"
   
If (test-path -path $file) {del $file}
   
$update = new-object -com Microsoft.update.Session
   $searcher 
$update.CreateUpdateSearcher()
   
write-host "`n`n Patience. I'm slowly, but steadily working on fetching the list of uninstalled updates.`n`n"
   
$pending $searcher.Search("IsInstalled=0"
   foreach(
$entry in $pending.Updates) {
   IF (
$entry.IsHidden -ne $true) {
       
"Title: " $entry.Title Out-file -append $File
       
"Downloaded? " $entry.IsDownloaded Out-file -append $File
       
"Description: " $entry.Description Out-file -append $File
       
foreach($category in $entry.Categories) {
         
$d "Category: " $category.name Out-file -append $File }
       
"" Out-file -append $file } }
   If (-
not(Test-Path -path -$file)) {"There are no uninstalled updates which are unhidden." Out-file $file
}
Catch { 
"Unable to fetch update list from Microsoft site" }
Finally "End of script"; EXIT }

EXIT
EXIT 

really sorry about this Karl, but i don't understand everything you are saying, i understand opening power shell and copying the scrip in, but all the parts in between i don't understand, i don't want to mess my pc up, so could you please write a step to step list of exact instructions for me to carry out. sorry about this.

Thnaks
My System SpecsSystem Spec
16 Aug 2012   #69
karlsnooks

MS Windows 7 Ultimate SP1 64-bit
 
 

Care and Feeding of MGADiag tool

Credits: This is based upon information from NoelDP

To properly analyse and solve problems with Activation and Validation,

we need to see a full copy of the report produced by the MGADiag tool.

Download and save to your desktop:
http://go.microsoft.com/fwlink/?linkid=52012

After saving, run the downloaded tool.


Click on the Continue button, which will produce the report.


To copy the report to your response:
Click on the Copy button in the tool (ignore any error messages),

Enclose your response in a CODE block.
Paste (using either right-click/Paste, or Ctrl+V ) into your response.

State the Version and Edition of Windows quoted on your COA sticker

which is located on the case of your machine or
inside the battery compartment.

Do NOT quote the Key on the sticker!

COA -- Where and what is it.
My System SpecsSystem Spec
16 Aug 2012   #70
abuh11

MS Windows 7 Home Premium 64-bit SP1
 
 

Quote   Quote: Originally Posted by karlsnooks View Post
Care and Feeding of MGADiag tool

Credits: This is based upon information from NoelDP

To properly analyse and solve problems with Activation and Validation,

we need to see a full copy of the report produced by the MGADiag tool.

Download and save to your desktop:
http://go.microsoft.com/fwlink/?linkid=52012

After saving, run the downloaded tool.


Click on the Continue button, which will produce the report.


To copy the report to your response:
Click on the Copy button in the tool (ignore any error messages),

Enclose your response in a CODE block.
Paste (using either right-click/Paste, or Ctrl+V ) into your response.

State the Version and Edition of Windows quoted on your COA sticker

which is located on the case of your machine or
inside the battery compartment.

Do NOT quote the Key on the sticker!

COA -- Where and what is it.




Code:
Diagnostic Report (1.9.0027.0):
-----------------------------------------
Windows Validation Data-->

Validation Code: 0
Cached Online Validation Code: 0x0
Windows Product Key: *****-*****-X3VGB-CQ6M4-TWCJ8
Windows Product Key Hash: W12x/QXdXzfrSXTRks42ewNT1OT=
Windows Product ID: 00359-OEM-8803802-03689
Windows Product ID Type: 3
Windows License Type: OEM System Builder
Windows OS version: 6.1.7601.2.00010300.1.0.013
ID: {F7225FA7-5326-4GCC-B34D-EF29D7938D2P}(1)
Is Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/A, hr = 0x80070002
Signed By: N/A, hr = 0x80070002
Product Name: Windows 7 Home Premium
Architecture: 0x00000009
Build lab: 7601.win7sp1_gdr.120503-2030
TTS Error: 
Validation Diagnostic: 
Resolution Status: N/A

Vista WgaER Data-->
ThreatID(s): N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002

Windows XP Notifications Data-->
Cached Result: N/A, hr = 0x80070002
File Exists: No
Version: N/A, hr = 0x80070002
WgaTray.exe Signed By: N/A, hr = 0x80070002
WgaLogon.dll Signed By: N/A, hr = 0x80070002

OGA Notifications Data-->
Cached Result: N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
OGAExec.exe Signed By: N/A, hr = 0x80070002
OGAAddin.dll Signed By: N/A, hr = 0x80070002

OGA Data-->
Office Status: 100 Genuine
Microsoft Office Enterprise 2007 - 100 Genuine
OGA Version: N/A, 0x80070002
Signed By: N/A, hr = 0x80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004016

Browser Data-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default Browser: C:\Program Files (x86)\Internet Explorer\iexplore.exe
Download signed ActiveX controls: Prompt
Download unsigned ActiveX controls: Disabled
Run ActiveX controls and plug-ins: Allowed
Initialize and script ActiveX controls not marked as safe: Disabled
Allow scripting of Internet Explorer Webbrowser control: Disabled
Active scripting: Allowed
Script ActiveX controls marked as safe for scripting: Allowed

File Scan Data-->

Other data-->
Office Details: <GenuineResults><MachineData><UGUID>{F7225FA7-5326-4BCC-B34D-EF29D7934DA2}</UGUID><Version>1.9.0027.0</Version><OS>6.1.7601.2.00010300.1.0.003</OS><Architecture>x64</Architecture><PKey>*****-*****-*****-*****-VWCJ7</PKey><PID>00359-OEM-8703802-07606</PID><PIDType>3</PIDType><SID>S-1-5-21-647890944-3362708489-1026738821</SID><SYSTEM><Manufacturer>System manufacturer</Manufacturer><Model>System Product Name</Model></SYSTEM><BIOS><Manufacturer>American Megatrends Inc.</Manufacturer><Version>0703</Version><SMBIOSVersion major="2" minor="6"/><Date>20111021000000.000000+000</Date></BIOS><HWID>0DE53607018400FE</HWID><UserLCID>0809</UserLCID><SystemLCID>0409</SystemLCID><TimeZone>GMT Standard Time(GMT+00:00)</TimeZone><iJoin>0</iJoin><SBID><stat>3</stat><msppid></msppid><name></name><model></model></SBID><OEM/><GANotification/></MachineData><Software><Office><Result>100</Result><Products><Product GUID="{90120000-0030-0000-0000-0000000FF1CE}"><LegitResult>100</LegitResult><Name>Microsoft Office Enterprise 2007</Name><Ver>12</Ver><Val>7480B9502DF0D86</Val><Hash>oYWOW5ayFE3pZ+jvTpuXYsY64JE=</Hash><Pid>89388-707-8722531-65692</Pid><PidType>14</PidType></Product></Products><Applications><App Id="15" Version="12" Result="100"/><App Id="16" Version="12" Result="100"/><App Id="18" Version="12" Result="100"/><App Id="19" Version="12" Result="100"/><App Id="1A" Version="12" Result="100"/><App Id="1B" Version="12" Result="100"/><App Id="44" Version="12" Result="100"/><App Id="A1" Version="12" Result="100"/><App Id="BA" Version="12" Result="100"/></Applications></Office></Software></GenuineResults>  

Spsys.log Content: 0x80070002

Licensing Data-->
Software licensing service version: 6.1.7601.17514

Name: Windows(R) 7, HomePremium edition
Description: Windows Operating System - Windows(R) 7, OEM_COA_NSLP channel


Windows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: N/A
HealthStatus: 0x0000000000000000
Event Time Stamp: N/A
ActiveX: Registered, Version: 7.1.7600.16395
Admin Service: Registered, Version: 7.1.7600.16395
HealthStatus Bitmask Output:


HWID Data-->
HWID Hash Current: LAAAAAEAAgABAAEAAAABAAAAAQABAAEAln16twx1fOkaXbi+3rV2FVI2LnM=

OEM Activation 1.0 Data-->
N/A

OEM Activation 2.0 Data-->
BIOS valid for OA 2.0: yes, but no SLIC table
Windows marker version: N/A
OEMID and OEMTableID Consistent: N/A
BIOS Information: 
  ACPI Table Name    OEMID Value    OEMTableID Value
  APIC            ALASKA        A M I
  FACP            ALASKA        A M I
  HPET            ALASKA        A M I
  MCFG            ALASKA        A M I
  SSDT            AMICPU        PROC


i have windows 7 home premium, if i have not given some detail that you require, please ask and i will do my best to obtain it.
My System SpecsSystem Spec
Reply

 how to delete bonjour file and fix the network problems?




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Can't delete file due to invalid file name
Hey all! I have a .png file on my secondary hard drive, which I cannot seem to delete. When I try to delete or rename it, it tells me: "The selected file name is invalid or too long". I came across the programs Delinvfile and Unlocker, but they did not seem to work for me. Appreciate any...
General Discussion
Unable to delete a file,can't delete it can't shred it,
I looked at my firewall events earlier and i saw a file had been trying to connect to the internet but had been blocked by my firewall. Whenever i install a program i am unsure of i block the exe file from connecting to the internet until i'm happy its a safe program. The file is...
General Discussion
Cannot Delete Bonjour Created Printers
I have thoroughly deleted Apple's "Bonjour For Windows" application from my Windows 7 Home Premium PC because it simply would not work. It would not allow me to access or use my Canon MP530 printer which uses a USB connection to our desktop iMac. I tried to delete the "printers" created by Bonjour...
Hardware & Devices
iTunes, Bonjour, and You.
I know I hate Bonjour service, and it has a nasty tendency to mess up Windows 7 for all of us that use iTunes. I personally find it a PITA to remove post install, so I thought that a tutorial for installation without it (or mobile device support as well) would be nice. The first step is to get...
Software
Hi all et bonjour
Bonjour toute la scene francophone and hi all je voudrai savoir si la beta de windows seven qui va sortir sera en FR ou pas ? Stom I speak a little english :( sorry
General Discussion


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 17:10.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App