Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Dns server problem


09 Sep 2012   #1

windows 7 ultimate x86
 
 
Dns server problem

im having trouble with my internet. it says dns server isnt responding. does that mean windows, router, or the internet causin this??

some times i just turn off my router and turn it back on and the internet works for like 15 mins and craps out after and i get disconnected from online games too.

i am using a wireless adapter on my computer and running windows 7
does the computer that the router is connected to have to be updated os?? (currently using xp)

My System SpecsSystem Spec
.

09 Sep 2012   #2

Windows 7 Ultimate x64
 
 

Welcome to SevenForums

Run an ipconfig /all from command prompt and post results.

Start>cmd type ipconfig /all

No, the OS has nothing to do with it.
My System SpecsSystem Spec
09 Sep 2012   #3

Windows 7 Ultimate 64-bit
 
 

A lot of the time Windows will use automatic settings for network connections but sometimes, for reasons unknown to Science and Religion these automated parameters just confuse the hell out of Windows.

It is possible to configure these manually however, and I can provide a walkthrough if required.
My System SpecsSystem Spec
.


09 Sep 2012   #4

windows 7 ultimate x86
 
 

windows ip config
host name...changofire-pc
primary dns suffix
node type...hybrid
ip routing enabled...no
WINS proxy enable...no

wireless LAN adapter wireless network connection 2
media state....media disconnected
connection-specific dns suffix
description...microsoft virtual wifi mini adapter
physical address...c0-c1-c0-60-e7-bc
dhcp enable...yes
autoconfig enable...yes

wireless LAN adapter wireless network connection
connection-specific dns suffix
description...linksys ae2500
physical address...c0-c1-c0-60-e7-bc
dhcp enable...yes
autoconfig enable...yes
ipv6 address : fd57:64d:8ec7:0:1047:cf4e:d5f2:25a8(preferred)
temporary ipv6 address : fd57:64d:8ec7:0:d584:9e05:843d:8a39(preferred)
link-local ipv6 address : fe80: :1047:cf4e:d5f2:25a8%11(preferred)
ipv4 address : 192.168.0.123(preferred)
subnet mask : 255.255.255.0
lease obtained...sun sept 9 2012 1:32pm
lease expired...mon sept 10 2012 1:32pm
default gateway : 192.168.0.1
dhcp server : 192.168.0.1
dhcpv6 iaid : 281067968
dhcpv6 client duid : 00-01-00-01-17-47-bd-95-e6-ba-aa-ee-3d
dns server : 192.168.1.1
192.168.0.1
net bios over tcpip...enabled
tunnel adapter teredo tunneling pseudo-interface
media state...disconnected
connection-specific dns suffix
description...teredo tunneling pseudo-interface
physical address...00-00-00-00-00-00-00-e0
dhcp enabled...no
autoconfig enabled...no

the only access to internet that i have is my phone

and yes a walkthrough would be very nice, i have been having this problem for over a month, and all i have been doing to turing off and on the modem and the router
My System SpecsSystem Spec
09 Sep 2012   #5

Windows 7 Ultimate 64-bit
 
 

Something very interesting I'm seeing here is you have two DNS addresses which are the default router IPs.
192.168.0.1 is usually Netgear, and 1.1 is usually Linksys. Do you have either of these, both, or have changed recently?

What's also interesting is that your default/primary DNS seems to be the Linksys (at 192.168.1.1) while your DHCP is set as 192.168.0.1 (Netgear).

On your computer I want you to open up your browser and type into the address bar first 192.168.0.1. Let me know what it says.
Then try 192.168.1.1 and again, let me know what it says.


After that we'll move on to manually configuring your wireless connection settings in Windows.
My System SpecsSystem Spec
09 Sep 2012   #6

Windows 7 Ultimate x64
 
 

That's what I was thinking was that the 2 different units are conflicting with different networks.

How do you have them hooked up?

You need to have your secondary plugged into a LAN port (1-4) not the WAN port and also turn off your dhcp on the secondary router and let your main handle it.

To do that log into your secondary router 192.168.0.1 or 1.1 which ever is what and disable the dhcp should be under routing or dhcp or dvanced can't remember, and power cycle the modem. You can still use the wireless on it. Just your main modem will be handling all your network requirements. DHCP, DNS

Also disable your microsoft virtual wifi mini adapter.
My System SpecsSystem Spec
Reply

 Dns server problem




Thread Tools



Similar help and support threads for2: Dns server problem
Thread Forum
problem of 2 NICs on Win Server Network & Sharing
Teeworlds Lan Server Problem!!! Gaming
Problem with SQL server in Windows 7 x86 BSOD Help and Support
Problem with Vmware server 1.0.10 Virtualization
Server problem at the forum ??? Chillout Room
Serious AOE2 server problem! Gaming
Metin2 server problem Gaming

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 04:09 AM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33