Should I purchase a Router/Switch/Modem/Router

Page 1 of 2 12 LastLast

  1. Posts : 521
    Windows 7 Ultimate x64 Service Pack 1
       #1

    Should I purchase a Router/Switch/Modem/Router


    Hi everyone,

    Before I begin stating my question let it be said that I am a dimwit in networking. I just learned from other people how to normally make it work and now the time's come that I actually have to do something and I can't really figure it out.

    1. My home DSL is powered by an Aztech ADSL - DSL5001EN. Currently, the modem is set to PPPoE/PPPoA with a username and a password.

    2. I have 2 PCs running on Wired LAN cards.

    3. I do not want to purchase wireless adapters for either as I want to go wired on this.

    4. I'd like to keep the Aztech as the DHCP server/router since it has a pretty good wireless range and all the features I need can be found on the GUI.

    What exactly is the device I need and generally, what do I need to do to make it work the way I have it pictured?

    Disclaimer: I may have mixed the terms a bit. I also know that I may not be making any sense due to the lack of knowledge I have in the subject. I wil not be held responsible for your brain and nose bleeds.
      My Computer


  2. Posts : 1,711
    Win 7 Pro 64-bit 7601
       #2

    The thing you linked is a modem-router, so it connects to the internet AND routes traffic between all the computers connected to it. Good.
    Looking at the ports behind, it has only ONE Ethernet port. Bad, and where your issue is.

    If you want to go 100% wired, you need an ethernet switch. It's a device that is smart enough to route the ethernet traffic from more than one PC through a single cable, but dumb enough that is plug and play.
    Something like this is cheap and tiny (i've seen tons of exactly the ones I linked and their bigger 24-port collegues in all companies with decent internal networks). Plug the ethernet cables from your router and from the computers into any of its 5 ports, as it doesn't matter, and you are ready to go.

    If you want to do something fancy like connecting ethernet (network cable) devices to your wireless modem router through wireless connection without buying wireless adapters, look for a Wireless Ethernet Bridge. These do need some setup to be integrated in your wireless network (as someone has to tell them the name of the wireless network they need to connect and the password), but it's usually straightforward as they are much simpler devices than the modem-router you have already.
      My Computer


  3. Posts : 9,582
    Windows 8.1 Pro RTM x64
       #3

    You need to use a switch. All routers that are able to provide WiFi and Ethernet connections already have one built-in, but not all have multiple Ethernet ports available (as in your case).

    Take a look at the following suggestions (I have chosen Gigabit switches to ensure no loss of bandwidth).

    GS605
    D-Link UK | DGS-1005D 5-Port 10/100/1000 Gigabit Desktop Switch
    Buy Cisco Linksys SE2500 5-Port Ethernet Switch - Specials Free Shipping
      My Computer


  4. Posts : 2,465
    Windows 7 Ultimate x64
       #4

    The only problem with your current setup is that you have only one LAN port on the modem which leaves you with only one computer at a time plugged. What you do need is just a switcher that will suffice for your needs, but a router can work as it plus additional features that you don't plan to use by now.
    So the choice is a switcher for cheaper hardware or a router for easier future upgrade if you change your mind thereafter. Both will do what you want. In any case, you'll need 3 RJ-45 cables for pluggin everything (I guess you already have one working on your current computer).

    Now for the setup. Simply you plug all 3 devices to the switcher ports (the modem you have, and both computers) and you're done. If you did go with the router, make sure you use 3 LAN ports and leave the WAN port free. With that, you should be able to use your network just like now, but with extra computers. The web interface for the modem will be still on the same IP and both computers should be able to take their addresses from the DHCP there. Port forwarding, if you use it, will work in exactly the same way too, and any wireless device can see both computers too.
    One caveat I can think is that, if the new device has the same default IP as the router, you may get a temporary conflict. But just change the IP of the switcher to anything else in the same range and you're done.
      My Computer


  5. whs
    Posts : 26,210
    Vista, Windows7, Mint Mate, Zorin, Windows 8
       #5

    I have a similar setup with 3 wired PCs in one location. For that I use a Netgear switch which I bought for $20. That works very well.

    In another location I use a Netgear router (which was $40) for a similar setup. The advantage of a router is that you get a hardware firewall which gives you a bit more protection. But the setup of a router is a bit more hassle.

    Both ways work. The easiest is the switch.
      My Computer


  6. Posts : 1,711
    Win 7 Pro 64-bit 7601
       #6

    point is, he has already a ADSL - DSL5001EN, that has "double-layer NAT/SPI firewall", so assuming he set up his firewall correctly, he just needs a switch.
      My Computer


  7. Posts : 983
    7 x64
       #7

    Sorry you have what Pictured? I don't see any picture attached to your post.
    And you haven't stated what you can't figure out and what you want to do

    Your Modem/Router combo box has everything you need. It is a Modem for your DSL connection, Is a Router to separate the Public side from the Private side, has a WiFi access point built in and has a 4 port switch included.

    What are you looking to add to this LAN setup?

    Do you want to have more then 4 computers WIRED to the Modem/Router combo box? If so then you need an Ethernet switch.
    Do you want to extend the WiFi signal? Then you will need a WiFi extender box.

    Other then that you'll need to explain what you want to do.
      My Computer


  8. Posts : 1,379
    Win7 Pro 32-bit, Win8 Pro 32-bit
       #8

    According to the page the OP linked to, it only has ONE port on the back, not four -- hence his inability to connect more than One PC at a time in wired mode.
      My Computer


  9. Posts : 983
    7 x64
       #9

    Mark Phelps said:
    According to the page the OP linked to, it only has ONE port on the back, not four -- hence his inability to connect more than One PC at a time in wired mode.
    Ok. Then he need an Ethernet switch.
      My Computer


  10. Posts : 521
    Windows 7 Ultimate x64 Service Pack 1
    Thread Starter
       #10

    So here's what I've established so far:

    First two replies made it clear to me that I simply need a switch. The router isn't even being considered here since I've already got all the features I need on my modem/router. If I ever do upgrade in the future, it will be a much better modem/router.

    Alejandro85 said:
    The only problem with your current setup is that you have only one LAN port on the modem which leaves you with only one computer at a time plugged. What you do need is just a switcher that will suffice for your needs, but a router can work as it plus additional features that you don't plan to use by now.
    So the choice is a switcher for cheaper hardware or a router for easier future upgrade if you change your mind thereafter. Both will do what you want. In any case, you'll need 3 RJ-45 cables for pluggin everything (I guess you already have one working on your current computer).

    Now for the setup. Simply you plug all 3 devices to the switcher ports (the modem you have, and both computers) and you're done. If you did go with the router, make sure you use 3 LAN ports and leave the WAN port free. With that, you should be able to use your network just like now, but with extra computers. The web interface for the modem will be still on the same IP and both computers should be able to take their addresses from the DHCP there. Port forwarding, if you use it, will work in exactly the same way too, and any wireless device can see both computers too.
    One caveat I can think is that, if the new device has the same default IP as the router, you may get a temporary conflict. But just change the IP of the switcher to anything else in the same range and you're done.
    This sounds exactly like the sort of thing I want to do. So on the switch itself, all three will be connected to LAN ports. The device will act like an extension of the modem in terms of LAN ports?

    Appreciate all the informative replies :)
      My Computer


 
Page 1 of 2 12 LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 04:28.
Find Us