Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Network Error - you do not have permission to access....


14 Nov 2012   #11

Home Premium 64bit
 
 

Quote   Quote: Originally Posted by 2xg View Post
Homegroup is what you need to have properly setup in your network since you have Windows 7 computers.
I never used it that way. Always used "Network" never had issues until 1 week ago.
All other computers still use "Network" feature?


My System SpecsSystem Spec
.

14 Nov 2012   #12

Windows 7 Ult, Windows 8.1 Pro,
 
 

Quote   Quote: Originally Posted by JohnnyBeGood View Post
Troubleshooting tips from Microsoft did not help here the error for fix it:




Time was 1 hour off. I've adjusted it and verified in BIOS.

Still no joy.
Most likely the time problem did fix at least one problem and the remaining problem was probably caused by Norton.

Use the Norton uninstall utility to remove all traces of Norton then see if you can access those files again.

You may want to run the sfc/scannow command to see if there are any missing system files.
My System SpecsSystem Spec
14 Nov 2012   #13

Home Premium 64bit
 
 

Thanks for the tips. I will check it out once I get home.
My System SpecsSystem Spec
.


16 Nov 2012   #14

Home Premium 64bit
 
 

Just to follow up.
As suggested I went ahead and downloaded Norton Removal Tool
After scan I did restart made sure windows firewall wasn't turned on and voila now I'm able to access the computer using "Network" feature!!!

It never thought this could be a issue.
I've spent countless hours searching the web and trying different suggestions.
Thank you to all!
My System SpecsSystem Spec
16 Nov 2012   #15

Windows 7 Ult, Windows 8.1 Pro,
 
 

Quote   Quote: Originally Posted by JohnnyBeGood View Post
Just to follow up.
As suggested I went ahead and downloaded Norton Removal Tool
After scan I did restart made sure windows firewall wasn't turned on and voila now I'm able to access the computer using "Network" feature!!!

It never thought this could be a issue.
I've spent countless hours searching the web and trying different suggestions.
Thank you to all!
Just about every third party A/V is capable of creating these problems for you.

I've seen this many times before so I was pretty sure the uninstall tool would be required and I'm glad it worked for you.
My System SpecsSystem Spec
16 Nov 2012   #16

Home Premium 64bit
 
 

Quote   Quote: Originally Posted by chev65 View Post
just about every third party a/v is capable of creating these problems for you.

I've seen this many times before so i was pretty sure the uninstall tool would be required and i'm glad it worked for you.
I was hesitant to install 360 again but I pulled the trigger and it still works! So, it was probably a glitch.

Joy is back
My System SpecsSystem Spec
17 Nov 2012   #17

Windows 7 Ult, Windows 8.1 Pro,
 
 

Quote   Quote: Originally Posted by JohnnyBeGood View Post
Quote   Quote: Originally Posted by chev65 View Post
just about every third party a/v is capable of creating these problems for you.

I've seen this many times before so i was pretty sure the uninstall tool would be required and i'm glad it worked for you.
I was hesitant to install 360 again but I pulled the trigger and it still works! So, it was probably a glitch.

Joy is back
What happens is that once you have your home network set up then Norton see's it and creates rules to allow it all to work right.

The problems start when you create a home network while Norton is installed as the rules creation isn't automatic.

You can usually go into the firewall settings and allow for your home network to function as it should but you need to know which settings to access for this.
My System SpecsSystem Spec
17 Nov 2012   #18

Home Premium 64bit
 
 

Quote   Quote: Originally Posted by chev65 View Post

What happens is that once you have your home network set up then Norton see's it and creates rules to allow it all to work right.

The problems start when you create a home network while Norton is installed as the rules creation isn't automatic.

You can usually go into the firewall settings and allow for your home network to function as it should but you need to know which settings to access for this.
Its good to know. Thanks for sharing!
My System SpecsSystem Spec
Reply

 Network Error - you do not have permission to access....




Thread Tools




Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 01:50 AM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33