Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Assign DHCP & Static IP of other subnet to the same NIC ?


03 Dec 2012   #1

Windows 7 Professional x64
 
 
Assign DHCP & Static IP of other subnet to the same NIC ?

Hi you all,

I was wondering if someone could tell me how to setup the Network Internet Controller (NIC) to carry one IP that he receive from the DHCP and one Static IP of another subnet.

In Windows XP Professional this was working perfecly with an registry modification:

Code:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\Tcpip\Parameters\Interfaces
choose the your NIC here

Code:
 
IPAddress = put you desired IP address
SubnetMask = put you Mask here
I done the same settings in Windows 7 but it does not work.

Any help on this would be greatly appreciated


My System SpecsSystem Spec
.

03 Dec 2012   #2

7 x64
 
 

Alternate configuration.
My System SpecsSystem Spec
03 Dec 2012   #3

Windows 7 Professional x64
 
 

Alternate tab is only working if you put two static IP's

I realy need one Static and one DHCP
My System SpecsSystem Spec
.


03 Dec 2012   #4

7 x64
 
 

Why do you need the static IP? The LAN you are connecting to doesn't have a DHCP server enabled?
My System SpecsSystem Spec
03 Dec 2012   #5

Windows 7 Professional x64
 
 

I need to have ONE DHCP IP address from the DHCP server.
But I have also the need to access another subnet and therefore I like to carry the NIC a second Static IP address.

This was working fine under WinXP but not on Windows 7.

So I need some anwser from an speciallist to make this happend under Windows 7.
My System SpecsSystem Spec
04 Dec 2012   #6

Windows 7 Professional x64
 
 

The solution to do this with Windows 7 you have to use a small tool called: Win IP Config
winipcfg / Win IP Config
My System SpecsSystem Spec
Reply

 Assign DHCP & Static IP of other subnet to the same NIC ?




Thread Tools



Similar help and support threads for2: Assign DHCP & Static IP of other subnet to the same NIC ?
Thread Forum
DHCP and static ip simultaneously, one nic ? Network & Sharing
How to assign different ip addresses (static) to different programs Network & Sharing
Can't assign static IP... Network & Sharing
Assign different Static IPs for Wireless Networks Network & Sharing
W7: DHCP works fine, but NO Static IP Network & Sharing
How to enable DHCP and Static IP adress on the same NIC ? Network & Sharing
Switch from DHCP to Static IP Network & Sharing

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 06:31 PM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33