Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: CMD Ping MISCOMPARE at offset 3

05 Dec 2012   #1
sle3pingz

Windows 7 Home Premium 64bit
 
 
CMD Ping MISCOMPARE at offset 3

Hello, i want ask about CMD when Pinging, Today i see something weird with my Ping ...

here's the Result :

Code:
Reply from 175.103.60.55: bytes=32 time=355ms TTL=53
Reply from 175.103.60.55: bytes=32 time=253ms TTL=53
Reply from 175.103.60.55: bytes=32 time=136ms TTL=53
Reply from 175.103.60.55: bytes=32 - MISCOMPARE at offset 3 - time=138ms TTL=53
Reply from 175.103.60.55: bytes=32 time=134ms TTL=53
i want ask , what was that - MISCOMPARE at offset 3 - ?
sorry for asking weird Question, and Thanks ...


My System SpecsSystem Spec
.

05 Dec 2012   #2
Alejandro85

Windows 7 Ultimate x64
 
 

It happens when the ping was answered, but the return packets don't match what was sent exactly. Sure it's weird, but I would not be worried if it happens only once, but if it's frequent it may signal a problem.

The official explanation is this:
Error Message:
My System SpecsSystem Spec
06 Dec 2012   #3
sle3pingz

Windows 7 Home Premium 64bit
 
 

Thanks ale, did you mean maybe they server fault? not my Hardware / Modem wrong, right?
My System SpecsSystem Spec
.


06 Dec 2012   #4
sle3pingz

Windows 7 Home Premium 64bit
 
 

Quote   Quote: Originally Posted by Alejandro85 View Post
It happens when the ping was answered, but the return packets don't match what was sent exactly. Sure it's weird, but I would not be worried if it happens only once, but if it's frequent it may signal a problem.

The official explanation is this:
Error Message:
you mean Signal problem? i using External Modem, is that you mean my Modem Signal Connection have a problem ?
My System SpecsSystem Spec
06 Dec 2012   #5
Alejandro85

Windows 7 Ultimate x64
 
 

That means that there was a fault "somewhere" in the route, but it's difficult to tell where. Maybe it's your computer, network card, ISP, internet connection across the world, or the server itself, there are really many factors that can go wrong. And even then, maybe it was just a temporary problem already fixed.

If you got the error just once, I would not worry about it, probably a one-time glitch in the infrastructure between the server and you. But if you keep getting that message, sure there is something wrong. To check, maybe you can ping something else, a completely different server just to see if the problem is on your side or on theirs.
My System SpecsSystem Spec
07 Dec 2012   #6
sle3pingz

Windows 7 Home Premium 64bit
 
 

Quote   Quote: Originally Posted by Alejandro85 View Post
That means that there was a fault "somewhere" in the route, but it's difficult to tell where. Maybe it's your computer, network card, ISP, internet connection across the world, or the server itself, there are really many factors that can go wrong. And even then, maybe it was just a temporary problem already fixed.

If you got the error just once, I would not worry about it, probably a one-time glitch in the infrastructure between the server and you. But if you keep getting that message, sure there is something wrong. To check, maybe you can ping something else, a completely different server just to see if the problem is on your side or on theirs.
it's sometimes glitch like this, i don't know what's the problem , i didn't do anything, this happened two or three days ago, ...

Code:
Reply from 202.3.208.138: bytes=32 time=96ms TTL=56
Reply from 202.3.208.138: bytes=32 time=86ms TTL=56
Reply from 202.3.208.138: bytes=32 time=86ms TTL=56
Reply from 202.3.208.138: bytes=32 time=176ms TTL=56
Reply from 202.3.208.138: bytes=32 - MISCOMPARE at offset 3 - time=126ms TTL=56
Reply from 202.3.208.138: bytes=32 time=86ms TTL=56
Reply from 202.3.208.138: bytes=32 time=86ms TTL=56
Reply from 202.3.208.138: bytes=32 time=86ms TTL=56
Reply from 202.3.208.138: bytes=32 time=86ms TTL=56
Reply from 202.3.208.138: bytes=32 time=1437ms TTL=56
Reply from 202.3.208.138: bytes=32 time=378ms TTL=56
Reply from 202.3.208.138: bytes=32 time=327ms TTL=56
Reply from 202.3.208.138: bytes=32 time=767ms TTL=56
My System SpecsSystem Spec
Reply

 CMD Ping MISCOMPARE at offset 3




Thread Tools





Similar help and support threads
Thread Forum
how to repair bad offset after cloning?
Cloned my 7 installation to SSD drive and besides a bad sector offset,i have a 0 MB partition located at the start of the drive followed by a 612(?) MB MBR partition with no letter assigned,it really looks messy.Could you please help me get out of this mess?EasyBCD wasnt much of help,it didnt even...
Installation & Setup
Tweaking boot partition offset and size...issues?
I decided to play around with the partition layout on my HD - reason being that I anticipate getting my first-ever SSD this Christmas. (Don't worry, I have backups of everything.) :) At the moment it look like this: C: (15GB), offset 63 - size 31,455,207 sectors D: (2GB), offset 31,455,270...
Performance & Maintenance
Partition Offset is different from what is listed in Gparted for SSD
The SSD I am using is an Intel 320 series 160 gb, and my computer is a Dell Studio 1558 with Windows 7 Home 64 bit. First I cloned my original HDD to the SSD using the Intel Migration Software that came bundled with it, and after getting the SSD installed into the laptop and booting it up I brought...
Backup and Restore
High ping in game, low ping in cmd
Hey, Firstly, I'm not sure if this belongs in the network or the gaming section but I decided to post this here. So, my problems is that when I play Left 4 Dead, I have something like +100ms ping to servers that others have just fine ping in. I also did a traceroute to a certain server and it...
Gaming
Offset Speakers L/R
Can I make it so that the sound comes more out of 1 speaker than the other. reason being is that my speakers are not perfectly centered, and I dont want them to be (they cant fit that way). So how do I go about doing so, offset the balance of the L/R speaker.
Music, Pictures & Video

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 12:04.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App