Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Can't access routers control page anymore

04 Feb 2013   #11
chev65

Windows 7 Ult, Windows 8.1 Pro,
 
 

Quote   Quote: Originally Posted by Danko View Post
Quote   Quote: Originally Posted by sml156 View Post
Connect your computer with the wireless and do an ipconfig from there and post that here


The new network card seems to throw the same stuff, can't connect to it either. Also, I think I've messed up this Router with Modem. So the issue is regarding my modem...
Yes, see now you are showing a normal LAN IP address.

I believe the problem is that one machine appears to be connecting to the modem while this one is connecting through what looks to be a wireless access point.

Or your modem is actually a modem/router, hard to say from this end. You need to disconnect from the modem and connect only to this router. The control page for this A/P should be at 192.168.0.254


My System SpecsSystem Spec
.
04 Feb 2013   #12
Danko

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

It's a "TeleWell TW-EA510 v3" I checked the manual it seems to be some "Router + Modem". What do you mean with "disconnect from the modem and connect only to this router."
My System SpecsSystem Spec
04 Feb 2013   #13
chev65

Windows 7 Ult, Windows 8.1 Pro,
 
 

Quote   Quote: Originally Posted by Danko View Post
It's a "TeleWell TW-EA510 v3" I checked the manual it seems to be some "Router + Modem". What do you mean with "disconnect from the modem and connect only to this router."
I assumed there was two routers or a modem/router is involved, it appears that the first machine is connecting to the modem while the other one is getting it's IP from the router.

Is this the only router in this network?

You need both machines obtaining the IP from the same source.

Are you sure that your machine is plugged into the LAN port on this modem/router? Cable into WAN port then machine plugs into LAN port.

It appears as if DHCP is enabled on your machine but I'm not sure why it's not giving you a proper IP, other than it's plugged into the wrong port or something.
My System SpecsSystem Spec
.

04 Feb 2013   #14
sml156

Microsoft Windows 7 Ultimate 32-bit 7601
 
 

here is what I would try first
make sure your lan cable is hooked up to the lan outputs not wan yours is clearly labeled you have 4 lan and 1 wan
1- go to the properties of your lan card double click on the ipv4 part and make sure everything is set to automatically to get an ip address
2- reboot see if that works (it actually should)
3- if that dosent work go back the the properties of your lan go into ipv4 and change the settings to
ip address = 192.168.0.110
subnet mask 255.255.255.0
default gateway = 192.168.0.254

and for the dns server I think its alright to leave blank but you could try
8.8.8.8
8.8.4.4

and just to check go into your ipv6 and make sure that is set to auto
My System SpecsSystem Spec
04 Feb 2013   #15
Danko

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

Quote   Quote: Originally Posted by sml156 View Post
here is what I would try first
make sure your lan cable is hooked up to the lan outputs not wan yours is clearly labeled you have 4 lan and 1 wan
1- go to the properties of your lan card double click on the ipv4 part and make sure everything is set to automatically to get an ip address
2- reboot see if that works (it actually should)
3- if that dosent work go back the the properties of your lan go into ipv4 and change the settings to
ip address = 192.168.0.110
subnet mask 255.255.255.0
default gateway = 192.168.0.254

and for the dns server I think its alright to leave blank but you could try
8.8.8.8
8.8.4.4

and just to check go into your ipv6 and make sure that is set to auto
It was plugged on the 4th empty ethernet port, so I switched it to the 1st, and TA-DA. Thanks <3
My System SpecsSystem Spec
04 Feb 2013   #16
chev65

Windows 7 Ult, Windows 8.1 Pro,
 
 

Quote   Quote: Originally Posted by Danko View Post
Quote   Quote: Originally Posted by sml156 View Post
here is what I would try first
make sure your lan cable is hooked up to the lan outputs not wan yours is clearly labeled you have 4 lan and 1 wan
1- go to the properties of your lan card double click on the ipv4 part and make sure everything is set to automatically to get an ip address
2- reboot see if that works (it actually should)
3- if that dosent work go back the the properties of your lan go into ipv4 and change the settings to
ip address = 192.168.0.110
subnet mask 255.255.255.0
default gateway = 192.168.0.254

and for the dns server I think its alright to leave blank but you could try
8.8.8.8
8.8.4.4

and just to check go into your ipv6 and make sure that is set to auto
It was plugged on the 4th empty ethernet port, so I switched it to the 1st, and TA-DA. Thanks <3
Seriously, that was the only problem?
My System SpecsSystem Spec
04 Feb 2013   #17
Danko

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

Quote   Quote: Originally Posted by chev65 View Post
Quote   Quote: Originally Posted by Danko View Post
Quote   Quote: Originally Posted by sml156 View Post
here is what I would try first
make sure your lan cable is hooked up to the lan outputs not wan yours is clearly labeled you have 4 lan and 1 wan
1- go to the properties of your lan card double click on the ipv4 part and make sure everything is set to automatically to get an ip address
2- reboot see if that works (it actually should)
3- if that dosent work go back the the properties of your lan go into ipv4 and change the settings to
ip address = 192.168.0.110
subnet mask 255.255.255.0
default gateway = 192.168.0.254

and for the dns server I think its alright to leave blank but you could try
8.8.8.8
8.8.4.4

and just to check go into your ipv6 and make sure that is set to auto
It was plugged on the 4th empty ethernet port, so I switched it to the 1st, and TA-DA. Thanks <3
Seriously, that was the only problem?
I did change the ipv4 settings, but missed that part...
My System SpecsSystem Spec
04 Feb 2013   #18
sml156

Microsoft Windows 7 Ultimate 32-bit 7601
 
 

now that you pasted your internet facing ip I would go back to your router web page and make sure that remote admin is turned off and an extra protection would be to change your username and password to log on to the router (not a good idea to have admin admin as password and user name)
OH and turn off WPS from reading your specks of the router I think it is on by default turn it off because that has to do with your wifi and it is easy to hack into with linux(OS)

Just out of curiosity im from Canada whats the weather like in Finland

Unless your a big company these are safe to put on the net when explaining your problem
Internal IP's
10.0.0.0 - 10.255.255.255
172.16.0.0 - 172.31.255.255
192.168.0.0 - 192.168.255.255

any IP's different to these and are external and you should delete and change to XXX.XXX.XXX.XXX
My System SpecsSystem Spec
Reply

 Can't access routers control page anymore




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Windows 7 will not let me access my 3TB external HDD anymore :(
Hello, I have been working with this HDD for almost a year now and have not had any problems with it till today. I unplugged it from my computer earlier and now when i plug it back in it goes through the normal "Installing device drivers.....device drivers installed" but after all of that it...
Hardware & Devices
Can't access routers webpage / control page anymore.
Hello, I noticed a few days ago that I cant access my router anymore "http://192.168.1.1/" I had some network problems so I uninstalled hamachi. http://www.sevenforums.com/network-sharing/233058-ethernet-24mbps-connection-crashes-every-10mins.html There's the thread I made, and all of the...
Network & Sharing
Can't login ym anymore and some websites I access regularly.
I can access my mail so I'm sure its not a user / pass issue but I haven't been able to login my ym for 3 days already. The problem isn't only with my desktop, but on my iPod as well. As it turns out, other people in the house couldn't access it on their gadgets either. Then I tried to look up...
Network & Sharing
shortcut to control panel page
hi all, not been about for a few weeks, but now i need your help: :) how do i open up a certain tab of the control panel with a shortcut? i use the page shown below a lot, switching between mic and line-in inputs whilst recording, and i'm tired of having to click start >> control panel >>...
Sound & Audio
Suddenly no internet access anymore
Internet used to work fine but has always been a pain to set up. This morning I _suddenly_ had no connectivity anymore whats-o-ever, it worked fine yesterday. I've had this problem before (where suddenly the internet is gone) but this time I've been unable so far to find the culprit. I am...
Network & Sharing
Delete Win XP partition, cant access Win 7 anymore
Hi, Yesterday i wanted to remove my Win XP partition from my HD. I did it using Easeus partition manager boot cd. I deleted the win XP partition, and left it doing it all night long. Today i cant start my Windows 7 installation. I already tried to repair the MBR with Win 7 installation disk...
Installation & Setup


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 07:13.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App