Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: NAS drive enclosure

09 Oct 2009   #11


I love this forum. Squonksc, I just ordered the adapter. For my printer.

My System SpecsSystem Spec
09 Oct 2009   #12

Win7 Build 7600 x86

Quote   Quote: Originally Posted by Antman View Post
I love this forum. Squonksc, I just ordered the adapter. For my printer.
Glad to be of service.

Pitty though it doesn't work for scanners.
I would love to put my multifunctional printer in the network,
but only the printer works.

I found one company that has a software solution for it,
but at twice the price of my printer.

Love this forum too, wife is getting jealous. j/k
My System SpecsSystem Spec
09 Oct 2009   #13

64-bit Windows 10 Pro

Quote   Quote: Originally Posted by SquonkSC View Post
If you still want to be able to access the nas from your network,
this article might interest you.
NAS to Network adapter. ($49,-)

NAS Adapter from Addonics

Thank you Michel.

Since it will still be handicapped at USB 2.0 speeds, it wouldn't benefit me. I was originally hoping for a cheap NAS box to use 1GB LAN for a faster connection as a workaround to the server's USB connection.

To bad they do not have a direct eSATA to NAS adapter.
My System SpecsSystem Spec

16 Oct 2009   #14

64-bit Windows 10 Pro

Well, I found a good open box special on Newegg for this one below and ordered and received it. - SANS DIGITAL MS2UT+B 2 Bay SATA to eSATA/USB 2.0 RAID 0 / 1 / SAFE33 / 50 Enclosure (Black) - Server RAID Systems

The special was that it was the silver model in the box and not the black model stated on the box even. LOL - SANS DIGITAL MS2UT+ 2 Bay SATA to eSATA/USB 2.0 RAID 0 / 1 / SAFE33 / 50 Enclosure (Silver) - Server RAID Systems

I have it setup in JBOD with two 1.5 TB 5400RPM drives to the ASRock server with WHS installed. It worked perfectly the first time through without a problem. Since it works so well, I'm not worried enough about the color to go through exchanging it.
My System SpecsSystem Spec

 NAS drive enclosure

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Similar help and support threads
Thread Forum
NAS VS External Hard Drive Enclosure
Hello I am looking between NAS system or External Hard Drive Enclosure the max i can spend is $550 at this moment i have 5 drives that i cant add to my pc as i am max out I would love to buy Synology DS1513+ Network Storage for $ 800 USD but i dont have the money for it and i cant...
General Discussion
IDE hard drive enclosure
I've pulled an old IDE hard drive from a xp computer. chuck it up in my IDE enclosure, plug it into my win7 pc, and nothing. not listed in dev man, computer, or disk manager, zip. i plug the same set up into another xp computer, no prob. i need my win7 pc to recognize it so i can save some info...
Hardware & Devices
Hard Drive Enclosure not being seen
I took one of my old drive from my old computer and installed in the Antec MX-1 Actively Cooled Hard Drive Enclosure. Then I plug the USB into my note book, the USB to SATA bridge works fine. However, I can not see the drive in "My Computer". I have checked a few posts and I looked into Disk...
Hardware & Devices
SATA drive in USB3.0 Enclosure
Hello - i have a 2.5" Momentus drive (model ST9500420AS, 500GB 16MB cache) and was wondering would get USB3.0 speeds by using an external connector, a USB3.0 cable and my laptop which has built in USB3.0 ports (and the Renesas driver), so i can use it as a portable drive
Hardware & Devices
Hard Drive Enclosure not being seen by 7
Please help! I recently upgraded my operating system to Windows 7 64 bit. I have an Intel MB with an E4500 core 2 dou processor running with 4 gigs ram. I have an old ide enclose that all of the sudden wont be seen by the new operating system. I have changed the jumper on the hard drive in...
Hardware & Devices
Looking for a good external enclosure/drive
Has anybody got this (Antec MX-1) - Antec MX-1 USB2.0 & eSATA External Enclosure - External Enclosures If so, do you like it? Any other suggestions? I want eSATA BUT I would like the freedom of not needing an external power source. Am I stuck with USB? I could go USB3...but it...
Hardware & Devices

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 08:31.

Twitter Facebook Google+

Windows 7 Forums

Seven Forums Android App Seven Forums IOS App