Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Network access to a Thecus NAS error: 0x80070035

04 Apr 2013   #11
2xg

Win7 & Win8 64bit
 
 

You might want to check if you have the latest driver for your network adapter.


My System SpecsSystem Spec
.
04 Apr 2013   #12
renren

Windws 7 ultimate 64bit
 
 

Quote   Quote: Originally Posted by 2xg View Post
Just to confirm, only one PC is having this issue, correct?
Quote:
Also i cant access the NAS until i log in to it via the address bar. Trying via the icon in network throws the error.
You may try disabling the Power Management mode of the affected network adapter, here's an image to give you a clue.

Also, try to disable the Firewall feature of your Security Suite just to test it out.
Quote   Quote: Originally Posted by 2xg View Post
You might want to check if you have the latest driver for your network adapter.

I used the Z77 ASrock Extreme 4

At the vendors site ASRock > Products > Motherboard > Z77 Extreme4 > Download it issued version ver:14.8.4.1

To check if i had the latest i went to Broadcom

Broadcom License Agreement | Broadcom

Apparently my mobo used the k57 on its board. and hence i installed the 15-4-0-9

Anything else can you suggest?
My System SpecsSystem Spec
06 Apr 2013   #13
2xg

Win7 & Win8 64bit
 
 

Have you rebooted the NAS? Try accessing the name of the NAS or IP Address when you click on Start orb then type \\NAS Name or \\NAS IP Address.
My System SpecsSystem Spec
.

06 Apr 2013   #14
renren

Windws 7 ultimate 64bit
 
 

Quote   Quote: Originally Posted by 2xg View Post
Have you rebooted the NAS? Try accessing the name of the NAS or IP Address when you click on Start orb then type \\NAS Name or \\NAS IP Address.

Yeah like i said when i do that (entering the nas via address bar) i can actually access the nas from network afterwards.
My System SpecsSystem Spec
06 Apr 2013   #15
chev65

Windows 7 Ult, Windows 8.1 Pro,
 
 

To get into NAS boxes you might want to consider adjusting the lanman server settings on the Win7 Ult. machine. These settings are famous for getting people into old servers and NAS boxes.

This link shows you which adjustments to make. > Solved W2K3 Server can access W8 W8 computer cant see W2K server
My System SpecsSystem Spec
06 Apr 2013   #16
renren

Windws 7 ultimate 64bit
 
 

Quote   Quote: Originally Posted by chev65 View Post
To get into NAS boxes you might want to consider adjusting the lanman server settings on the Win7 Ult. machine. These settings are famous for getting people into old servers and NAS boxes.

This link shows you which adjustments to make. > Solved W2K3 Server can access W8 W8 computer cant see W2K server
Quote:
Control Panel - Administrative Tools - Local Security Policy

Local Policies - Security Options

Network security: LAN Manager authentication level
Set to Send LM & NTLM responses only

Set the Minimum session security for NTLM SSP
Disable Require 128-bit encryption

Reboot all machines after making the adjustment.
I followed this and it didnt work.

Im not sure what to do now, connecting to the NAS N7700 PRO at first boot isnt working and if i leave downloads on over night the PC becomes unable to connect to the network and i cant toggle the state of the LAN adapters.

Should i try for a fresh repair install?
My System SpecsSystem Spec
07 Apr 2013   #17
2xg

Win7 & Win8 64bit
 
 

Try disabling the power saving mode of your network adapter and also change the Speed and Duplex (by default it's on Auto Negotiation) from your computer's Device Manager. See 2 images attached.


Attached Images
Network access to a Thecus NAS error: 0x80070035-power-management-mode-disable.png Network access to a Thecus NAS error: 0x80070035-speed-duplex.png 
My System SpecsSystem Spec
07 Apr 2013   #18
renren

Windws 7 ultimate 64bit
 
 

Quote   Quote: Originally Posted by 2xg View Post
Try disabling the power saving mode of your network adapter and also change the Speed and Duplex (by default it's on Auto Negotiation) from your computer's Device Manager. See 2 images attached.

I found something strange my available values only go up to 100 Full Duplex but my network is 1Gb (im sure)

I will check the cables and such and get back to you soon
My System SpecsSystem Spec
07 Apr 2013   #19
2xg

Win7 & Win8 64bit
 
 

You may also set to 100 full duplex if that's all your NIC can handle, but for a faster transfer rate you should consider getting a gig NIC.
My System SpecsSystem Spec
08 Apr 2013   #20
renren

Windws 7 ultimate 64bit
 
 

Quote   Quote: Originally Posted by 2xg View Post
You may also set to 100 full duplex if that's all your NIC can handle, but for a faster transfer rate you should consider getting a gig NIC.
Im pretty sure im looking at the properties of the onboard NIC, also if look at TaskManager>Networking it says its linkspeed is 1Gbps
My System SpecsSystem Spec
Reply

 Network access to a Thecus NAS error: 0x80070035




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Error 0x80070035 - Windows cannot access share
I have a small office that has a server, running Server 2008, that acts as a file server. There are several shares on the server that give access to our 5 users. We have 5 workstations that all run Windows 7. Each workstation has the same 5 user accounts so any user can work on any of the 5...
Network & Sharing
Error 0x80070035, can't access any shares
So over the past few days, I've painstakingly setup a new Sandy Bridge PC just the way I like it and was preparing to transplant it into my existing system when I discovered I can't access any network shares! It worked fine when it was a completely clean install with just the driver loaded, ugh. ...
Network & Sharing
Network Error 0x80070035 - In only one PC
In a network with 10 computers, the PC-2 can access everyone but the PC-5. All other computers can access each other and PC-5 can also access everyone else. Where is the bug? The PC-2 has the bug right? Any tips where to start? Why is it only one PC that the PC-2 cannot access? Basic...
Network & Sharing
Network path not found error 0x80070035
I have three systems on a home network: one running XP, one running Win 7 32-bit, and the other running Win 7 64-bit. From the XP system, I can see the 32-bit Win 7 system and vice versa. But neither one can see the Win 7 64-bit system. On XP, I get the error: \\Win764System is not accessible....
Network & Sharing
Windows cannot access ... Error code: 0x80070035
I have spent much time on this problem ... I have two systems on the network: Windows 7 Home Premium 32-bit (desktop - wired) and Windows 7 Professional 64-bit (desktop - wired); using a Netgear N600 router. The Professional 64-bit I shall call "sys1" and the Home Premium 32-bit "sys2" for this...
Network & Sharing
Windows cannot access \\COMP 0x80070035 The network path was not found
This particular computer is straight from the factory, and has been working just fine for months. Now, all of a sudden, I can't read two different network paths. The error above keeps coming up, no matter what I do. The computers I'm trying to connect to haven't changed. They're both running...
Network & Sharing


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 01:18.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App