Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Error 0x80070035 - Windows cannot access share

03 Apr 2013   #1
TimSuds

Windows 7 Professional - 32 bit
 
 
Error 0x80070035 - Windows cannot access share

I have a small office that has a server, running Server 2008, that acts as a file server. There are several shares on the server that give access to our 5 users.

We have 5 workstations that all run Windows 7. Each workstation has the same 5 user accounts so any user can work on any of the 5 workstations.

This setup has been working perfectly for years. Now all of a sudden, one machine has starting giving the error 0x80070035 when trying to access the server shares. It can access any other workstation on the network, just not the server. It doesn't matter which of the 5 user accounts you log in as, you still receive this error. All 5 user accounts can access the server from any of the other workstations.

I've also tried entering the server name or the ip address in Internet Explorer on the problem workstation and am also unable to access the server this way.

I would really appreciate any suggestions to get this fixed.

Thanks!


My System SpecsSystem Spec
.

04 Apr 2013   #2
benjy206

Windows 7 Ultimate 64-bit
 
 

It could be a problem with you Firewall. Try disable the firewall and see if this makes a difference
My System SpecsSystem Spec
04 Apr 2013   #3
TimSuds

Windows 7 Professional - 32 bit
 
 

Quote   Quote: Originally Posted by benjy206 View Post
It could be a problem with you Firewall. Try disable the firewall and see if this makes a difference
Disabling the "private network" firewall on the Server fixed it.

Obviously, I cannot leave this disabled so where do I start trying to identify the culprit setting?

I really appreciate the help!
My System SpecsSystem Spec
.


04 Apr 2013   #4
benjy206

Windows 7 Ultimate 64-bit
 
 

Yes i thought that might be it you would have to access the firewall to allow this computer to access it allow the ip address of it.
My System SpecsSystem Spec
04 Apr 2013   #5
TimSuds

Windows 7 Professional - 32 bit
 
 

Time to do some reading to figure out how to enable all internal ip addresses through the firewall...

I don't understand why this computer worked for years, now suddenly it is blocked without any changes to the server settings.

Thanks again for your help...
My System SpecsSystem Spec
04 Apr 2013   #6
benjy206

Windows 7 Ultimate 64-bit
 
 

Quote   Quote: Originally Posted by TimSuds View Post
Time to do some reading to figure out how to enable all internal ip addresses through the firewall...

I don't understand why this computer worked for years, now suddenly it is blocked without any changes to the server settings.

Thanks again for your help...
No problem at all here to help There could be many of reason's something as little as an update on the AV or even windows update
My System SpecsSystem Spec
Reply

 Error 0x80070035 - Windows cannot access share




Thread Tools





Similar help and support threads
Thread Forum
Network access to a Thecus NAS error: 0x80070035
Im trying to connect a recently 'upgrade repaired' 64bit ULT to my Thecus NAS but windows throws an error "Windows cannot access \\NAS Check the spelling of the name otherwise, there might be a problem with your network, to try to identify and resolve network problems, click diagnose ...
Network & Sharing
Error 0x80070035, can't access any shares
So over the past few days, I've painstakingly setup a new Sandy Bridge PC just the way I like it and was preparing to transplant it into my existing system when I discovered I can't access any network shares! It worked fine when it was a completely clean install with just the driver loaded, ugh. ...
Network & Sharing
Homegroups - "windows cannot access" 0x80070035
There are three W7 64 bit machines on our homegroup. Two work fine together and both of them can access the material on the problem 3rd machine as well as each other. However the third machine cannot access the material on either of the other two even though their icons and folders show under...
Network & Sharing
Windows cannot access ... Error code: 0x80070035
I have spent much time on this problem ... I have two systems on the network: Windows 7 Home Premium 32-bit (desktop - wired) and Windows 7 Professional 64-bit (desktop - wired); using a Netgear N600 router. The Professional 64-bit I shall call "sys1" and the Home Premium 32-bit "sys2" for this...
Network & Sharing
Windows cannot access \\COMP 0x80070035 The network path was not found
This particular computer is straight from the factory, and has been working just fine for months. Now, all of a sudden, I can't read two different network paths. The error above keeps coming up, no matter what I do. The computers I'm trying to connect to haven't changed. They're both running...
Network & Sharing
Error Code 0x80070035 "Windows can not access"
I have Win seven ultimate x64 and netgear readynas. the ReadyNAS is set to shut down every night at 1:00am and startup again at 7:00AM The ReadyNAS works correctly. But windows gives me about 20 messages every morning that it lost the connection to the ReadyNAS RAID fileserver. "Windows can...
Network & Sharing

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 09:23.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App