Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: New computer sets limit on file sharing size error 0x80070035


14 Apr 2013   #1

Windows 7 Ultimate x64
 
 
New computer sets limit on file sharing size error 0x80070035

New member, I hope I'm posting this correctly.

I had a new computer built and it is connected to my wired home network. There are three computers connected and the two older computers work fine over the network. The new computer is the one I'm having problems with. It will allow me to transfer files up to 7.17 GB then will disconnect from the network and gives me the following error: 0x80070035. Network reconnects after rebooting.
The first time I tried to transfer anything after hooking up the new computer it blocked after a little over 1 GB. The guy that built the computer did a lot of changes to the machine and it worked fine for a couple of days, allowing me to transfer at will and any size file. Now it is blocking after 7 GB. I was trying to work around this by transferring smaller files and this worked for 12-14 file transfers at about 2-3GB each. The last file I tried to transfer was about 1.25GB and it shut me down after transferring about half.
I understand windows has limits built in? and he supposedly disabled the limits? If this is correct it has obviously enabled the limits. does any of this make sense and how do I disable the limits set by Windows and make sure they donít become active again?

Thank you,
Linda

Windows 7 Ultimate x64


My System SpecsSystem Spec
.

15 Apr 2013   #2

Windows 7 Ult, Windows 8.1 Pro,
 
 

Quote   Quote: Originally Posted by LindaPradetto View Post
New member, I hope I'm posting this correctly.

I had a new computer built and it is connected to my wired home network. There are three computers connected and the two older computers work fine over the network. The new computer is the one I'm having problems with. It will allow me to transfer files up to 7.17 GB then will disconnect from the network and gives me the following error: 0x80070035. Network reconnects after rebooting.
The first time I tried to transfer anything after hooking up the new computer it blocked after a little over 1 GB. The guy that built the computer did a lot of changes to the machine and it worked fine for a couple of days, allowing me to transfer at will and any size file. Now it is blocking after 7 GB. I was trying to work around this by transferring smaller files and this worked for 12-14 file transfers at about 2-3GB each. The last file I tried to transfer was about 1.25GB and it shut me down after transferring about half.
I understand windows has limits built in? and he supposedly disabled the limits? If this is correct it has obviously enabled the limits. does any of this make sense and how do I disable the limits set by Windows and make sure they donít become active again?

Thank you,
Linda

Windows 7 Ultimate x64
There are no download limits with Windows 7, the driver would be the actual limiting factor in these cases. Sometimes changing the advanced settings of the driver can help but it's hard to say which settings would have an effect.

You should first try going to Windows updates to obtain the latest drivers for your system.
My System SpecsSystem Spec
16 Apr 2013   #3

Windows 7 Ultimate x64
 
 

Thanks chev65,

Thanks again for your help, I checked for driver updates and installed a couple, I haven't had a chance to check if this helped on not. I'm going to try to do some transferring later this evening. I have to hook up the old computer to do it so it takes awhile. I'll post either Thursday or Friday with results.

Linda
My System SpecsSystem Spec
.


16 Apr 2013   #4

Windows 7 Ult, Windows 8.1 Pro,
 
 

Quote   Quote: Originally Posted by LindaPradetto View Post
Thanks chev65,

Thanks again for your help, I checked for driver updates and installed a couple, I haven't had a chance to check if this helped on not. I'm going to try to do some transferring later this evening. I have to hook up the old computer to do it so it takes awhile. I'll post either Thursday or Friday with results.

Linda
The new drivers should help, let me know how the testing goes.
My System SpecsSystem Spec
26 Apr 2013   #5

Windows 7 Ultimate x64
 
 

Chev65,
Well, sorry about the delay on checking on the drivers repairing the transfer problem. Right after I posted last I got a large print order that needed to go out and it tied up my computer until yesterday. Today I had a chance to check on the tranfers. I tried to transfer a 10.1 GB file from the old computer to the new initiated (drop and drag) through windows on the new computer. It transferred 3.63 GB and then shut me down and kicked me off the network as before, so the drivers were't the problem. I'm trying to get the guy that built this computer for me to come out an try to fix it, again. I don't know how soon he can get to it, he is rather slow on the response time.


If you can think of anything else I could do, please let me know. Is it possible that the belkin router has some limits set into it?


Thank you for your time and effort on this.

Linda
My System SpecsSystem Spec
26 Apr 2013   #6

Windows 7 Ult, Windows 8.1 Pro,
 
 

Quote   Quote: Originally Posted by LindaPradetto View Post
Chev65,
Well, sorry about the delay on checking on the drivers repairing the transfer problem. Right after I posted last I got a large print order that needed to go out and it tied up my computer until yesterday. Today I had a chance to check on the tranfers. I tried to transfer a 10.1 GB file from the old computer to the new initiated (drop and drag) through windows on the new computer. It transferred 3.63 GB and then shut me down and kicked me off the network as before, so the drivers were't the problem. I'm trying to get the guy that built this computer for me to come out an try to fix it, again. I don't know how soon he can get to it, he is rather slow on the response time.


If you can think of anything else I could do, please let me know. Is it possible that the belkin router has some limits set into it?


Thank you for your time and effort on this.

Linda
Routers don't typically have these types of limits built into them.

There are a few other things that might cause this, one is Anti Virus software, which one are you running?

For the other possible problem I would need to see a screen shot of the ipconfig/all from this machine.
My System SpecsSystem Spec
26 Apr 2013   #7

Windows 7 Ultimate x64
 
 

First, why is your reply in here different than the one that came through in the email reply? I'll answer first this then what I got in the email.

(There are a few other things that might cause this, one is Anti Virus software, which one are you running?)
Answer: Microsoft Security Essentials


(For the other possible problem I would need to see a screen shot of the ipconfig/all from this machine.)
Answer: How the heck do I do that? I tried typing ipconfig into the search box under the start icon and a small box appears and then immediately disappears. Do I do something else?

From email: (I would try going into Device Manager, look under Network Adaptors for the NIC are having problems with, right click to properties then click on the Advanced settings tab, try disabling or enabling one of those settings one at a time and check "Move large file" to see if any of them have an effect on the problem.)
Answer Before I do this, I just checked the Network adapters in the Device Manager. There are two listed 1. "Intel (R) 82574L Gigabit Network Connection" & 2. "Intel (R) 82579LM Gigabit Network connection". The both appear to be enabled, is this right? Should they both be enabled and if not how do I figure out which one is the correct one and disable the other?

(If you can post a screen shot of the Advanced settings I may be able to help decide which ones to adjust.

Let me know about the two adapters before I check on the rest.

I'm also going to install a wireless network adapter (PCI slot) on the advise of Al, my computer builder. Should I go ahead and install it and see if it clears up the problem. I just got it the other day and what with the large print order and all I forgot all about it until now.

Thanks,
Linda
My System SpecsSystem Spec
26 Apr 2013   #8

Windows 7 Ult, Windows 8.1 Pro,
 
 

Quote   Quote: Originally Posted by LindaPradetto View Post
First, why is your reply in here different than the one that came through in the email reply? I'll answer first this then what I got in the email.

(There are a few other things that might cause this, one is Anti Virus software, which one are you running?)
Answer: Microsoft Security Essentials


(For the other possible problem I would need to see a screen shot of the ipconfig/all from this machine.)
Answer: How the heck do I do that? I tried typing ipconfig into the search box under the start icon and a small box appears and then immediately disappears. Do I do something else?

From email: (I would try going into Device Manager, look under Network Adaptors for the NIC are having problems with, right click to properties then click on the Advanced settings tab, try disabling or enabling one of those settings one at a time and check "Move large file" to see if any of them have an effect on the problem.)
Answer Before I do this, I just checked the Network adapters in the Device Manager. There are two listed 1. "Intel (R) 82574L Gigabit Network Connection" & 2. "Intel (R) 82579LM Gigabit Network connection". The both appear to be enabled, is this right? Should they both be enabled and if not how do I figure out which one is the correct one and disable the other?

(If you can post a screen shot of the Advanced settings I may be able to help decide which ones to adjust.

Let me know about the two adapters before I check on the rest.

I'm also going to install a wireless network adapter (PCI slot) on the advise of Al, my computer builder. Should I go ahead and install it and see if it clears up the problem. I just got it the other day and what with the large print order and all I forgot all about it until now.

Thanks,
Linda
It's different because after about an hour of research I believe I found a more direct cause of the problem rather than adjusting the advanced settings.

You should wait to install the other network device until after I see the ipconfig/all which will most likely lead to a direct solve of this particular problem. If this is the problem I think it is then it will be very easy to solve.

You just need to type ipconfig/all into an elevated command prompt then post the results here.

My System SpecsSystem Spec
26 Apr 2013   #9

Windows 7 Ultimate x64
 
 

Thank you for explaining how do access this. And thank you for the time you are expending on this for me.

Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\Pradetto>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Pradetto-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : Belkin
Ethernet adapter Local Area Connection 2:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) 82579LM Gigabit Network Connecti
on
Physical Address. . . . . . . . . : 00-1E-8C-F5-20-E9
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . : Belkin
Description . . . . . . . . . . . : Intel(R) 82574L Gigabit Network Connectio
n
Physical Address. . . . . . . . . : 00-1E-8C-F5-20-EA
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::1136:4d05:56e8:ce3%11(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.2.2(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Friday, April 26, 2013 11:44:42 AM
Lease Expires . . . . . . . . . . : Monday, June 02, 2149 10:08:13 PM
Default Gateway . . . . . . . . . : 192.168.2.1
DHCP Server . . . . . . . . . . . : 192.168.2.1
DHCPv6 IAID . . . . . . . . . . . : 234888844
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-18-D4-69-0A-00-1E-8C-F5-20-EA
DNS Servers . . . . . . . . . . . : 192.168.2.1
NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter isatap.Belkin:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . : Belkin
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 9:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv6 Address. . . . . . . . . . . : 2001:0:9d38:6ab8:2c8b:13c7:682a:b93e(Pref
erred)
Link-local IPv6 Address . . . . . : fe80::2c8b:13c7:682a:b93e%13(Preferred)
Default Gateway . . . . . . . . . : ::
NetBIOS over Tcpip. . . . . . . . : Disabled
Tunnel adapter isatap.{D85D1D7E-4048-4DEE-BE7D-26DEDAA685E5}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
C:\Users\Pradetto>
My System SpecsSystem Spec
26 Apr 2013   #10

Windows 7 Ult, Windows 8.1 Pro,
 
 

Well it's not the problem I thought it was and the ipconfig looks good.

It may help to be running the latest version of the driver which is dated 3/8/2013 .
https://downloadcenter.intel.com/Sea...net+Controller

I would try adjusting the Advanced settings for this Intel NIC in the Device Manager. It may take some trial and error to find out which setting has an effect on the problem. You might also want to contact the manufacture of this new work station in case they know anything about this problem.

It's hard to say which settings will have an effect but testing them one at a time may reveal the culprit.

If this was a name brand machine with OEM install then you might want to consider removing all the non Windows preinstalled adware or bloatware or even a clean install.
My System SpecsSystem Spec
Reply

 New computer sets limit on file sharing size error 0x80070035




Thread Tools



Similar help and support threads for2: New computer sets limit on file sharing size error 0x80070035
Thread Forum
Error Code: 0x80070035 Unable to acces computer via network Network & Sharing
Is There an Upper File Size Limit on Copy/Cut & Paste? General Discussion
Solved Can't See Other Computer for File Sharing Network & Sharing
Solved ErrorCode 0X80070035 : WinXP stopped sharing with Win7...? Network & Sharing
network error message: "Error code: 0x80070035". No file shareing help Network & Sharing
Fraps size limit Software
Network Sharing file limit?? Network & Sharing

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 06:07 AM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33