Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: No text in Network Connections

14 Jun 2013   #21
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

Quote   Quote: Originally Posted by nulano View Post
Code:
C:\Windows\system32>netsh int show interf
 
Admin State    State          Type             Interface Name
-------------------------------------------------------------------------
Enabled        Connected      Dedicated        Hamachi
Enabled        Disconnected   Dedicated        Pripojenie bezdrôtovej siete 2
Enabled        Disconnected   Dedicated        Lokálne pripojenie
Enabled        Connected      Dedicated        Pripojenie bezdrôtovej siete                           <-- This is what I want to modify
What is Hamachi .. wired or wireless?


My System SpecsSystem Spec
.
14 Jun 2013   #22
nulano

Windows 7 Home Premium x64
 
 

Quote   Quote: Originally Posted by Kaktussoft View Post
Quote   Quote: Originally Posted by nulano View Post
Code:
C:\Windows\system32>netsh int show interf
 
Admin State    State          Type             Interface Name
-------------------------------------------------------------------------
Enabled        Connected      Dedicated        Hamachi
Enabled        Disconnected   Dedicated        Pripojenie bezdrôtovej siete 2
Enabled        Disconnected   Dedicated        Lokálne pripojenie
Enabled        Connected      Dedicated        Pripojenie bezdrôtovej siete                           <-- This is what I want to modify
What is Hamachi .. wired or wireless?
Virtual.
https://secure.logmein.com/products/...i/default.aspx
My System SpecsSystem Spec
14 Jun 2013   #23
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

Quote   Quote: Originally Posted by Kaktussoft View Post
Code:
netsh interface ip set address "Pripojenie bezdrôtovej siete" dhcp
works?
Do the above command . After that connect to the wireless router you want to do port forwarding on. After succesfull connection:

Code:
netsh interface ip show config name="Pripojenie bezdrôtovej siete"
Post output
My System SpecsSystem Spec
.

14 Jun 2013   #24
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

Quote   Quote: Originally Posted by nulano View Post
Quote   Quote: Originally Posted by Kaktussoft View Post
Quote   Quote: Originally Posted by nulano View Post
Code:
C:\Windows\system32>netsh int show interf
 
Admin State    State          Type             Interface Name
-------------------------------------------------------------------------
Enabled        Connected      Dedicated        Hamachi
Enabled        Disconnected   Dedicated        Pripojenie bezdrôtovej siete 2
Enabled        Disconnected   Dedicated        Lokálne pripojenie
Enabled        Connected      Dedicated        Pripojenie bezdrôtovej siete                           <-- This is what I want to modify
What is Hamachi .. wired or wireless?
Virtual.
https://secure.logmein.com/products/...i/default.aspx
How do you access the internet right now on sick pc?

Code:
netsh wlan show interfaces
post output
My System SpecsSystem Spec
14 Jun 2013   #25
nulano

Windows 7 Home Premium x64
 
 

Quote   Quote: Originally Posted by Kaktussoft View Post
Quote   Quote: Originally Posted by Kaktussoft View Post
Code:
netsh interface ip set address "Pripojenie bezdrôtovej siete" dhcp
works?
Do the above command . After that connect to the wireless router you want to do port forwarding on. After succesfull connection:

Code:
netsh interface ip show config name="Pripojenie bezdrôtovej siete"
Post output
It's this PC I'm using right now. When I set it to DHCP it works every time.

Code:
C:\Windows\system32>netsh interface ip show config name="Pripojenie bezdrôtovej siete"

Configuration for interface "Pripojenie bezdrôtovej siete"
    DHCP enabled:                         Yes
    IP Address:                           192.168.1.4
    Subnet Prefix:                        192.168.1.0/24 (mask 255.255.255.0)
    Default Gateway:                      192.168.1.250
    Gateway Metric:                       0
    InterfaceMetric:                      25
    DNS servers configured through DHCP:  192.168.1.250
    Register with which suffix:           Primary only
    WINS servers configured through DHCP: None
Quote   Quote: Originally Posted by Kaktussoft View Post
Quote   Quote: Originally Posted by nulano View Post
Quote   Quote: Originally Posted by Kaktussoft View Post
What is Hamachi .. wired or wireless?
Virtual.
https://secure.logmein.com/products/...i/default.aspx
How do you access the internet right now on sick pc?

Code:
netsh wlan show interfaces
post output
Code:
C:\Windows\system32>netsh wlan show interfaces

There is 1 interface on the system:

    Name                   : Pripojenie bezdrôtovej siete
    Description            : Atheros AR9285 Wireless Network Adapter
    GUID                   : 63a0eab9-0113-453b-91ef-b4e9a20aa677
    Physical address       : 00:25:d3:83:67:04
    State                  : connected
    SSID                   : tiba
    BSSID                  : 00:22:b0:9a:67:d9
    Network type           : Infrastructure
    Radio type             : 802.11g
    Authentication         : WPA2-Personal
    Cipher                 : CCMP
    Connection mode        : Auto Connect
    Channel                : 1
    Receive rate (Mbps)    : 54
    Transmit rate (Mbps)   : 54
    Signal                 : 88%
    Profile                : tiba

    Hosted network status  : Not started
My System SpecsSystem Spec
14 Jun 2013   #26
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

So only thing you want is:
It must always have ip address 192.168.1.4 (or at least always the same), so you can port forward afterwards?

Physical address : 00:25:d3:83:67:04
More common syntax is: 00-25-D3-83-67-04


All you have to do is:
  • If wireless with mac address 00-25-D3-83-67-04 connects to your home router .... it should give him address 192.168.1.4
That's all you have to do. It will still use DHCP but it always get the same IP address. When connected to work router or other hotspot.... it just gets a dynamic address from that dhcp server.

So a much beter solution!

How to do it... with "dcp reservation" on router. Something like this Setting up DHCP Reservation on a Linksys wireless-N router
My System SpecsSystem Spec
14 Jun 2013   #27
nulano

Windows 7 Home Premium x64
 
 

Quote   Quote: Originally Posted by Kaktussoft View Post
So only thing you want is:
It must always have ip address 192.168.1.4 (or at least always the same), so you can port forward afterwards?

Physical address : 00:25:d3:83:67:04
More common syntax is: 00-25-D3-83-67-04


All you have to do is:
  • If wireless with mac address 00-25-D3-83-67-04 connects to your home router .... it should give him address 192.168.1.4
That's all you have to do. It will still use DHCP but it always get the same IP address. When connected to work router or other hotspot.... it just gets a dynamic address from that dhcp server.

So a much beter solution!

How to do it... with "dcp reservation" on router. Something like this Setting up DHCP Reservation on a Linksys wireless-N router
I don't think that's an option for my router (D-Link DSL-2641R).
My System SpecsSystem Spec
14 Jun 2013   #28
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

You posted many screenshots, for example:

It shows "network connections". Why in english? And all netsh commands gave english output as well!!
I'm dutch... all that output is in Dutch on my site!

Any other win7 windows that aren't translated?
My System SpecsSystem Spec
14 Jun 2013   #29
Kaktussoft

Microsoft Community Contributor Award Recipient

Microsoft Windows 7 Home Premium 64-bits 7601 Multiprocessor Free Service Pack 1
 
 

Quote   Quote: Originally Posted by nulano View Post
Quote   Quote: Originally Posted by Kaktussoft View Post
So only thing you want is:
It must always have ip address 192.168.1.4 (or at least always the same), so you can port forward afterwards?

Physical address : 00:25:d3:83:67:04
More common syntax is: 00-25-D3-83-67-04



All you have to do is:
  • If wireless with mac address 00-25-D3-83-67-04 connects to your home router .... it should give him address 192.168.1.4
That's all you have to do. It will still use DHCP but it always get the same IP address. When connected to work router or other hotspot.... it just gets a dynamic address from that dhcp server.

So a much beter solution!

How to do it... with "dcp reservation" on router. Something like this Setting up DHCP Reservation on a Linksys wireless-N router
I don't think that's an option for my router (D-Link DSL-2641R).
http://www.t-mobile.cz/dcpublic/Navo...nk%202641B.pdf
page 32, but actual information is on page 33.
My System SpecsSystem Spec
14 Jun 2013   #30
nulano

Windows 7 Home Premium x64
 
 

Quote   Quote: Originally Posted by Kaktussoft View Post
You posted many screenshots, for example:

It shows "network connections". Why in english? And all netsh commands gave english output as well!!
I'm dutch... all that output is in Dutch on my site!

Any other win7 windows that aren't translated?
A couple examples:
  • Everything in "Nástroje na správu" (screenshot)
  • Almost everything in CMD
  • Speech Recognition (but it states that it's not supported)
Example in CMD:
Code:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. Všetky práva vyhradené.

C:\Users\Ondrej>if /?
Performs conditional processing in batch programs.

IF [NOT] ERRORLEVEL number command
IF [NOT] string1==string2 command
IF [NOT] EXIST filename command

  NOT               Specifies that Windows should carry out
                    the command only if the condition is false.

  ERRORLEVEL number Specifies a true condition if the last program run
                    returned an exit code equal to or greater than the number
                    specified.

  string1==string2  Specifies a true condition if the specified text strings
                    match.

  EXIST filename    Specifies a true condition if the specified filename
                    exists.

  command           Specifies the command to carry out if the condition is
                    met.  Command can be followed by ELSE command which
                    will execute the command after the ELSE keyword if the
                    specified condition is FALSE

The ELSE clause must occur on the same line as the command after the IF.  For
example:

    IF EXIST filename. (
        del filename.
    ) ELSE (
        echo filename. missing.
    )

The following would NOT work because the del command needs to be terminated
by a newline:

    IF EXIST filename. del filename. ELSE echo filename. missing

Nor would the following work, since the ELSE command must be on the same line
as the end of the IF command:

    IF EXIST filename. del filename.
    ELSE echo filename. missing

The following would work if you want it all on one line:

    IF EXIST filename. (del filename.) ELSE echo filename. missing

If Command Extensions are enabled IF changes as follows:

    IF [/I] string1 compare-op string2 command
    IF CMDEXTVERSION number command
    IF DEFINED variable command

where compare-op may be one of:

    EQU - equal
    NEQ - not equal
Press any key to continue . . .


Attached Thumbnails
No text in Network Connections-static004.png  
My System SpecsSystem Spec
Reply

 No text in Network Connections




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Deleting my own network connections listings (sys tray network icon)
I'm preparing a laptop for transfer to someone else and have deleted all my network accounts (wireless) in the Control Panel. But over in the Sys Tray, when I click on the network icon, my two connections are still listed (name and name-guest). How do I delete those? Win 7x64. Thanks,
Network & Sharing
Network Connections Blank - Red X on Network Icon- but Internet works
I am connected to the internet, but there is a red x on my network icon (yet when you hover over it, it says internet access.) I tried to go into the network and sharing > change adapter settings, yet the Network connections folder is COMPLETELY blank. I tried reinstalling the driver. ...
Network & Sharing
No Network Connections
Hello, just bought a MSI U135 as a present and cannot get internet connection, although my laptop connects without any problems. Wifi is enabled on the MSI. all software associated with the Network Adaptors is upto date. Any sugestions please
Network & Sharing
Three network connections ?
Hi Gang, can anyone tell me why I have three connections shown in network connections. The first two I know are my Ethernet and Wireless connections but the third is a mystery, it is "Microsoft Virtual WiFi Miniport Adapter". all I need to know is if this should be there and if it's all OK. Thanks...
Network & Sharing
Network Bridge - Add or Remove Network Connections
How to Remove or Add a Network Connection to a Network Bridge If you have two or more networks connected by a network bridge, then this will show you how to remove or add a network connection to the bridge in Windows 7 and Windows 8. You should not add a public Internet connection to a...
Tutorials
Two network connections
Hi i have a ADSL connection with a router connected to my local area connection and i recently brought a HSDPA mobile broad band connection with HUAWEI E156G USB stick is there any way to use both connections same time? like for download local area connection and for browse HSDPA...
Network & Sharing


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 02:03.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App