Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Roswell rnx-n1 adopter issue

24 Aug 2013   #1
drmax

W7 premium 64
 
 
Roswell rnx-n1 adopter issue

Ok, so I'm trying to connect to my encrypted Linksys router, which is hooked to my mainframe pc. I find the network and hit connect at which time I enter the password. It connects, sig strength good and soforth. I try to go onto the net and no go. There is no connection to the net. Unsure what is happening, as it used to work, like as in a few weeks ago. I have not tried to disable my network connection to then see if it connects.
Unsure why this has to be so difficult. What happen to the days of plug-n-play? Thx for any help on this. I've never messed with the internal settings in Roswell, as there seems to be a million. Also, if I shut off the pc and restart, the password for wireless is lost and have to reenter. I'm about to pitch this in the ditch.


My System SpecsSystem Spec
.

26 Aug 2013   #2
2xg
Microsoft MVP

Win7 & Win8 64bit
 
 

Hi drmax,

Can you access the router setting? Try changing the Wireless Mode (usually this is in a Mixed Mode), change it to G/N, G or B/G.

If this is still a No-Go, please follow the basic posting requirements here and provide us more info to better assist you.
My System SpecsSystem Spec
27 Aug 2013   #3
drmax

W7 premium 64
 
 

Quote   Quote: Originally Posted by 2xg View Post
Hi drmax,

Can you access the router setting? Try changing the Wireless Mode (usually this is in a Mixed Mode), change it to G/N, G or B/G.

If this is still a No-Go, please follow the basic posting requirements here and provide us more info to better assist you.
Will get to this in a few days. It's my kids homework pc and we can work around it for now. Thx for this info. I'll post back soon. DM
My System SpecsSystem Spec
.


30 Oct 2013   #4
drmax

W7 premium 64
 
 

I had a G or B. Selected G and now connected. I will restart and if it does not connect, I will follow your further instruction. Thx a ton and time slid by so sorry for the later reply. Just go back at this. DM
My System SpecsSystem Spec
30 Oct 2013   #5
2xg
Microsoft MVP

Win7 & Win8 64bit
 
 

No worries.... glad to hear that we could helped and your issue has been resolved.
You're Welcome!

Quote   Quote: Originally Posted by drmax View Post
I had a G or B. Selected G and now connected. I will restart and if it does not connect, I will follow your further instruction. Thx a ton and time slid by so sorry for the later reply. Just go back at this. DM
Edit: Issue not yet resolved!
My System SpecsSystem Spec
30 Oct 2013   #6
drmax

W7 premium 64
 
 

Thank you on the help....and with a restart it appears it did not store my "lock" code. I ck'd and there is not a box to ck to "remember" the code...if there is even suppose to be one. This won't work, if I have to keep entering this huge code. (for my kids homework) I'll just go to the place you told me to and enter the info. thx, DM
My System SpecsSystem Spec
30 Oct 2013   #7
2xg
Microsoft MVP

Win7 & Win8 64bit
 
 

Before you do the preposting requirements, can we try something else? See below....

Remove all network profiles stored from the problematic computer, then re-add your SSID (or wireless network) with the proper encryption, here's a Tutorial from Brink.

Also, if you are using a wireless manager or utility for your Wi-Fi device, this might be conflicting with your WLAN Auto Configuration that you might find under Services (click on the Start button type services.msc then press enter). In this image, the native WLAN Auto Configuration service is Started, but if you are using a wireless manager, make sure that this is disabled.


Attached Thumbnails
-wlan-auto-config.jpg  
My System SpecsSystem Spec
31 Oct 2013   #8
drmax

W7 premium 64
 
 

I've realized just now that during start up I immediately have to hit the F1 key to continue. My time is not keeping track either. Hunch has it my cmos bat. is dead. I'm wondering if this could be causing an assortment of issues? I'll dig this bat out and replace and then continue with troubleshooting. Thx, DM
My System SpecsSystem Spec
01 Nov 2013   #9
drmax

W7 premium 64
 
 

I am using XP on troubled pc and there are 4 different connections, 3 of which I have disable. I went into the xp wireless center and do not see a way to manage it, as of anything similar to what is listed by Brink.
My System SpecsSystem Spec
06 Nov 2013   #10
drmax

W7 premium 64
 
 
update

I sent rosewell my issue and they replied to 1stly disable my security from my linksys. I went into that setting, disabled....restarted main pc (hooked to router) When I went to see if it would then hookup to my xp machine it still said my linksys was locked. I'm starting to think that I should reinstall the software for linksys and go from there. This all used to work and unsure WTH happened. It did start by me encrypting my linksys. After I did this, I noticed there was 2 of the same named networks....i.e. "mynetwork"....showing up. It somehow had created 2 networks. I had spent hours trying to figure out what caused this. I'm going for a fresh install of the software. Advise if you disagree. Thx for listening, DM
My System SpecsSystem Spec
Reply

 Roswell rnx-n1 adopter issue




Thread Tools





Similar help and support threads
Thread Forum
Boot issue, 0xc0000098 ci.DLL file issue
OK so I hope this can be a quick fix and thanks for your help. * Randomly computer didn't start, get something telling me that the ci.dll file is missing or corrupt and error 0xc0000098 * safe mode and last know good configuration both result in bsod * Tried a few things, disconnect all...
BSOD Help and Support
I'm a Late Adopter - Do Not Want Win 8.1 - Is My Purchase Genuine?
I'm a born procrastinator. By the time I shopped MS no would longer sell me Win 7 (if if they still will, they've done a good job of hiding the possibility.) All their major authorized vendors are also out of stock, unless Amazon represented by an Amazon Seller is considered authorized. I have...
General Discussion
net start command line issue - 64bit issue?
I am trying (in vain) to issue a net start command "net start - "C:\Program Files (x86)\uTorrent\utorrent.exe", on the command line. The error message is "the filename, directory name or volume label syntax is incorrect". I believe the 3 details are correct, as i am looking at the utorrent.exe file...
General Discussion
HP Multi Print/Scan Issue Re Install Issue?
I have an HP M1522 NF multi function peripheral attached to a PC running Windows 7. I needed to re install the drivers and software the other day but now it will only install the printer drivers and not the scanner drivers or any of the accompaying software?
Hardware & Devices
Interesting connectivity issue, just a browser issue
Opps, maybe not so unique since I just noticed an ENTIRE forum for browsers...perhaps moving this is appropriate...if so, please do. I will be reading up in there. Its interesting because I can't find any mention of it anywhere on this site. Specifically browser connectivity is lost after a...
Network & Sharing
Early Adopter, Baker Tilly, Completes Windows 7 Deploym
More...
News

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 02:32.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App