Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: server 2008 with mulitple IP addresses


04 Sep 2013   #1

Windows 7 Home Premium 64bit
 
 
server 2008 with mulitple IP addresses

hello
I have a windows server 2008 from OVH
and I just ordered an IP block of 4

but I haven't a clue how to use the new IP's hehehe

I want to assign IP addresses to dif windows user accounts

My System SpecsSystem Spec
.

04 Sep 2013   #2

Windows 7 Professional x64 SP1 ; Windows Server 2012 R2 Standard
 
 

You can't assign IP addresses to user accounts. Only machines. Also what is the make/model of the router? NAT will need to be adjusted for this to work.

Josh
My System SpecsSystem Spec
04 Sep 2013   #3

Windows 7 Home Premium 64bit
 
 

I have no idea about the router

I just clicked to order an IP block of 4 at OVH
and this is the email they sent me

---------------------------------
178.32.253.8/30 Network IP : 178.32.253.8 Broadcast IP : 178.32.253.11 Gateway IP : 178.32.253.10 (not usable) Netmask : 255.255.255.252 If you want to use this block on a server, all the IPs are usable. The IP network (178.32.253.8) and also the broadcast IP (178.32.253.11). In this case OVH recommends using the netmask '255.255.255.255' so that the configuration remains valid in case of block division. -- Comment: If however this block should be switched to a virtual rack or a Dedicated Cloud offer, it would release the addresses following: Network IP : 178.32.253.8 IP gateway : 178.32.253.10 Broadcast IP : 178.32.253.11 Then use the subnet mask 255.255.255.252.
-----------------------------------------------

I tried connecting to them all threw RDP but no response
I have no idea what im doing hehehe
My System SpecsSystem Spec
.


04 Sep 2013   #4

Windows 7 Professional x64 SP1 ; Windows Server 2012 R2 Standard
 
 

Essentially you have a /30 network with two usable IP addresses with one being the network identifier used for routing and the other being the broadcast address used for broadcasts on multi-access environments (Ethernet, token ring, fiddi... etc).

Or you can use a /32 subnet mask for each IP address and have them connected directly to the internet.

If you use the /32 subnet mask then you may run into issues with the router side since your IP address block will not be advertised via BGP to the internet routing table. Unless you can give me a make/model of the router I cannot help you with this.

Josh
My System SpecsSystem Spec
04 Sep 2013   #5

Windows 7 Home Premium 64bit
 
 

your way over my head hehehe

I have clients that conect to my servers vea RDP
I want to offer them more then one IP address from this one server
like when they connect from the server out to another server I want the other server to see them as dif IP addresses

im explaining this poorly
lets put it in a forum context of sorts
I want t have 4 people connect to my server vea RDP
then open a browser and use it to visit a forum
and have that forum see them each as having a dif IP address
My System SpecsSystem Spec
04 Sep 2013   #6

Windows 7 Professional x64 SP1 ; Windows Server 2012 R2 Standard
 
 

Where are your clients connecting from?

Josh
My System SpecsSystem Spec
04 Sep 2013   #7

Windows 7 Home Premium 64bit
 
 

all over the world
has to be threw RDP
My System SpecsSystem Spec
04 Sep 2013   #8

Windows 7 Professional x64 SP1 ; Windows Server 2012 R2 Standard
 
 

Are the RDP connections coming through the internet or not?

Josh
My System SpecsSystem Spec
04 Sep 2013   #9

Windows 7 Home Premium 64bit
 
 

yes threw the internet
My System SpecsSystem Spec
04 Sep 2013   #10

Windows 7 Professional x64 SP1 ; Windows Server 2012 R2 Standard
 
 

You will need to change some settings on your router in order to apply the appropriate address scheme. How many servers are there? If only one, how many interfaces are there? You can only assign one IP address per interface on a server.

Josh
My System SpecsSystem Spec
Reply

 server 2008 with mulitple IP addresses




Thread Tools




Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 01:03 PM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33