Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: No Internet with Static IP

20 Nov 2013   #11
archer

Windows 7 ultimate x64
 
 

@ OP, can you please provide us with the model and make of the router that you are using?


My System SpecsSystem Spec
.
20 Nov 2013   #12
wevy69

windows 7 pro 64bit
 
 

Hi. There are two different domains on the same network. The router is configured for both. I have around 200+ machines on the 10. Range and use DHCP. I have around 10 machines on the 172. Range in the office with static IP's. This has been working fine for around 2 years with the draytek router we use. Problem has only surfaced now upgrading workstations to win 7. Thanks everyone for looking into this. It now has me baffled.
My System SpecsSystem Spec
21 Nov 2013   #13
wevy69

windows 7 pro 64bit
 
 

The router is a Draytek vigor. Not sure of model number but will update when back on site.
My System SpecsSystem Spec
.

25 Nov 2013   #14
wevy69

windows 7 pro 64bit
 
 

Now sorted. Thanks to everyone for looking at this. It turns out that I needed to connect a cable to ports 3 or 4 on the router for the 172. range. Ports 1 and 2 were for the 10. range. It would seem that even with a cable only plugged into port 1 XP machines on the 172. range were still able to route through port 1. Again thanks to everyone for looking. Oh and the router is a Dratek Vigor 2830 if anyone is interested or may come accross the same problem.
My System SpecsSystem Spec
25 Nov 2013   #15
archer

Windows 7 ultimate x64
 
 

Congrats for getting the solution. Did some reading on the issue posted in your last post.

We can achieve that leaking routes between the global routing table and the VRF (and vice-versa
because otherwise you can't obtain bi-directional connectivity) could be
achieved by appointing some static routes, ie.

ip route vrf x <dest prefix> <dest prefix mask> <next-hop> global
ip route <vrf dest prefix> <vrf dest prefix mask> <interface> <vrf next-hop>

For a more realistic scenario, to this simple configuration you need to add
some kind of redistribution and take into account NATting if using private
addresses inside the VRF

I am sure you have it but this can be handy.
My System SpecsSystem Spec
Reply

 No Internet with Static IP




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Static internal ip slow's internet down.
Well, i wanted to try to port forward a server, and while doing so i tried to change my internel IP to a static one (screen of what i mean is uploadet). As soon as i do change to a static ip, the internet is realy slow, and opening an website often takes 20-30 Seconds, and sometimes they don't even...
Network & Sharing
Static IP, Router, Office Network losing Internet
I recently switched to Time Warner (TW) cable for internet and VOIP (Ring Central) at my office. Ever since the switch, I am having to reset the modem and/or router when one or all stations lose internet connection. I am guessing, now, that it has something to do with static IP? This morning, I...
Network & Sharing
Cannot connect to internet without Static IP
I have been googling about this problem that I have been having for over 2 hours, but to no avail. Ever since I upgraded my previously windows vista computer up to windows 7, I have been having severe problems connecting to my home internet. Now, I cannot change any of my routers settings since...
Network & Sharing
How to get a static ip?
I need a static ip for a lot of things. VPN, remote shutdown, etc. But how to I get or make one? (If it helps I have COX HIGH SPEED INTERNET.
Network & Sharing
SHARING INTERNET USING STATIC IP IN IPv4
Hi...why in windows 7 we must set ip static (using IPv4) to 192.168.137.1 for internet connection sharing?
Network & Sharing
Sound Static Help (removes most static)
Stumbled upon this trying to fix my static and it helped it out a bit, not 100% though but thought i would share it. Anyways; goto your playback devices > click your speaker properties > advanced > and change the default format to a higher setting, such as 24 bit, 48000hz (studio quality) ...
Sound & Audio


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 04:13.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App