Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Need DOS command

01 Jan 2014   #1
PinkiPad

Win 7 64 bit
 
 
Need DOS command

For years I used to go into a DOS window, type the IP with something and the port, to see if it is open. If so I used to ban on my own server. Now I can't remember the command or port.

Thanks


My System SpecsSystem Spec
.
02 Jan 2014   #2
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 

Pinki as far as I know you can only ping the IP the port I have never tried but the IP address just type ipconfig in the command prompt.
My System SpecsSystem Spec
02 Jan 2014   #3
PinkiPad

Win 7 64 bit
 
 

Thanks. I will try it tomorrow at my laptop. I'm on iPad now and have no idea if you can telnet. Your command rings a bell. But I remember we would type something with a port number to see if it was open.

I learned it on IRC to check if an ip was compromised. We had a series of ports to check if open. One specific port allowed anyone to hop on, send virii/nuke/ping offline, then move on to the next.

Tomorrow I'll try. Thanks b
My System SpecsSystem Spec
.

02 Jan 2014   #4
ICIT2LOL

Desk1 7 Home Prem / Desk2 10 Pro / Main lap Asus ROG 10 Pro 2 laptop Toshiba 7 Pro Asus P2520 7 & 10
 
 

Ok Pinki perhaps things can be done with a server but never having worked with one am not sure.

Plus I am sorry to hear about your problem/s - look I wrok as an RN and I tell my subordinates I don't mind them asking me a thousand times how /when /where /what as it is preferable to ending up in a please explain because they don't ask.
My System SpecsSystem Spec
02 Jan 2014   #5
TanyaC

Linux Mint 17 Cinnamon | Win 7 Ult x64
 
 

If you got to a browser you can type a port number like this: 192.168.1.1:8080, if the port is open and anything is listening you should get a valid response.

Also, Gibson research Corporation also has open port tests (shields up).. http://www.grc.com

Of course, this is an external test and if you have your router running a firewall/nat, this site may just report all ports stealthed. It wont help you much if you are looking to examine ports from WITHIN your network.


Tanya
My System SpecsSystem Spec
03 Jan 2014   #6
PinkiPad

Win 7 64 bit
 
 

Thank you. I'll try from my laptop in three hours

2Cit, life had drastically changed. I went from hand-coding from memory to not able to code anything without looking it up. From 150+ websites earning megabucks to 8 sites earning nothing. From walking to wheelchair. From very fat to very chubby (hey, something good happened!). I'm very slowly on the road to recovery (no memory of three months in two hospitals due to a virus in the heart. Coma, loss of memory, foot/leg neuropathy and the list goes on.

It's horrendously frustrating to update a website then two days later not knowing where the changes were made, how to access the sidebar, how to code a link to a page. Simple coding tasks take time to look up and implement. I try not to get frustrated as it serves no purpose. I used to help here. Now I need help with things so simple I feel and look stupid asking.
My System SpecsSystem Spec
Reply

 Need DOS command




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Command Prompt command <ipconfig> not working
when I open up my command prompt and type 'ipconfig' without the ' and press enter it returns the line: 'ipconfig' is nto recognized as an internal or external command, operable program, or batch file I am trying to find out the information I need in order to set up a static IP Address for port...
Network & Sharing
need help with command prompt command
@Echo Off Title Sccm cd %systemroot%\system32 call :IsAdmin Reg.exe add "HKLM\SOFTWARE\Microsoft\CCM\CcmExec" /v "SystemTaskExcludes" /t REG_SZ /d "" /f Reg.exe add "HKLM\SOFTWARE\Microsoft\CCM\CcmExec" /v "ProvisioningMode" /t REG_SZ /d "false" /f Reg.exe add...
General Discussion
My Windows 7 64bit Home Premium does not have a COMMAND or COM command
When I am told to go to START/SEARCH and type in COMMAND, so I can RUN as Admin, it finds neither COM.exe or COMMAND.exe so I can "Run as Admin" in the DOS windows. It use to. I do have a RUN command that will bring up the DOS window but when executing some commands like CHKDSK it tells me I...
General Discussion
What does this command do?
solved solved solved solved solved solved solved solved solved solved solved solved solved solved solved solved solved solved solved solved solved solved solved solved solved solved solved solved
Performance & Maintenance
No REG Command in "Open elevated command window here" DOS Box
I have used the @="cmd.exe /s /k pushd \"%V\"" type of Registry mod to obtain a context menu "Open elevated command window here" menu item, such as in the "Open elevated command window here" thread ( http://www.sevenforums.com/general-discussion/75069-open-elevated-command-window-here.html ). ...
General Discussion
Run administrative command prompt from command prompt
Ok So I got myself into a unique bind here. I was trying to install some custom system files (for a theme) and I did it wrong and now I cant open explorer.exe . I dont want to goto a backup because this is a easy fix. (in my view). So I need to know how to run command prompt with administrative...
General Discussion


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 20:24.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App