Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Assigning static wan ip addresses

05 Feb 2014   #1
BananaMann

Windows 7
 
 
Assigning static wan ip addresses

Hi,

I've just purchased an Asus RT-N66U router and am trying to configure my multiple IP addresses (I have a block of 8, or rather 5 usable IPs)

On my previous router I ran the following:

:ip ipadd intf=LocalNetwork addr=IP4/29 addroute=enabled
:ip ipadd intf=LocalNetwork addr=IP3/29 addroute=enabled
:ip ipadd intf=LocalNetwork addr=IP2/29 addroute=enabled
:ip ipadd intf=LocalNetwork addr=IP1/29 addroute=enabled
:ip ipadd intf=LocalNetwork addr=IP0/29 addroute=enabled
:ip ipadd intf=LocalNetwork addr=IP9/29 addroute=enabled
:nat mapadd intf=Static outside_addr IP4 weight 1 index=0
:nat mapadd intf=Static outside_addr=IP9 inside_addr=192.168.1.50 weight=120 access_list IP9
:nat mapadd intf=Static outside_addr=IP9 inside_addr=192.168.1.50 weight=120 access_list 192.168.1.50
:saveall

:nat mapadd intf=Static outside_addr=IP0 inside_addr=192.168.1.51 weight=120 access_list IP0
:nat mapadd intf=Static outside_addr=IP0 inside_addr=192.168.1.51 weight=120 access_list 192.168.1.51
:nat mapadd intf=Static outside_addr=IP1 inside_addr=192.168.1.52 weight=120 access_list IP1
:nat mapadd intf=Static outside_addr=IP1 inside_addr=192.168.1.52 weight=120 access_list 192.168.1.52
:nat mapadd intf=Static outside_addr=IP2 inside_addr=192.168.1.53 weight=120 access_list IP2
:nat mapadd intf=Static outside_addr=IP2 inside_addr=192.168.1.53 weight=120 access_list 192.168.1.53
:nat mapadd intf=Static outside_addr=IP3 inside_addr=192.168.1.54 weight=120 access_list IP3
:nat mapadd intf=Static outside_addr=IP3 inside_addr=192.168.1.54 weight=120 access_list 192.168.1.54
:service system ipdelete name=TELNET ip=149.255.104.16
:saveall

Someone helped me configure it, and honestly I don't know where to start in writing that for the new router, or if it's even required?

Has anyone used one of the Asus routers (firmware version 3.0.0.4.374_979-gbc8961e) and successfully managed to configure multiple WAN IP addresses? I was hoping there would be something in the control panel, but I can't find anything.

Thanks!


My System SpecsSystem Spec
.
05 Feb 2014   #2
BananaMann

Windows 7
 
 

Nobody can help me?
My System SpecsSystem Spec
05 Feb 2014   #3
2xg

Win7 & Win8 64bit
 
 

Hi there,

This is a bit complicated concern so we have to do some research to provide you hints or possible answers.

This is based on my own experience of assigning multiple Public or WAN IPs using a Sonicwall appliance. I am not familiar with Asus but you may consult the manual.

I took some snips of my Sonicwall device. First I'd assign a Public IP that my ISP gave me (which I have 10 blocks) to Address Object in Network Setting of Sonicwall. Then in NAT Policy Setting you would assign that Public IP to an App or Program (make sure that you enable the NAT Policy by checking off the box) in order for this to work. See attached images for your review. This is all the hints that I can provide you. Navigate in your Asus router settings or read the manual so that you'll be able to figure it out.

Edit: Had to wiped out part of the Public IP.


Attached Images
Assigning static wan ip addresses-configuring-wan-ip-2-corrected.jpg Assigning static wan ip addresses-configuring-wan-ip-1-corrected.jpg 
My System SpecsSystem Spec
.

Reply

 Assigning static wan ip addresses




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Assigning fixed IP addresses to devices in home network
G'day, I have a home network comprising of: 1 x desktop 3 x laptop 1 x network printer During bootup, these devices are assigned dynamic IP addresses, typically 192.168.1.x, where x is typically between 1 and 7.
Network & Sharing
Cannot access NAS after assigning static ip
hi, here's my problem - i have a WD Mybooklive and i have assigned a static ip address and net mask to it. After doing this i cannot access it on my computer which has a DHCP ip address. i can however access it's web page by typing it's ip address into a browser i cannot access it by...
Network & Sharing
How to assign different ip addresses (static) to different programs
Hey guys, nice to meet you all! I hope I have this thread in the right place but any-ways to my questions. How would I go about assigning different ip addresses (static) to different programs? Ill give you an example of what I mean. There is a Popular game called Minecraft (I don't know if...
Network & Sharing
Assigning static IP address on Linksys E3000 router?
OK, I’m a little weak on networks so here’s my issue…. I have a Linksys router E3000 which works well for my small network which currently consists of two desktops, mine (wired), and the family desktop (wireless). Anyway it seems the router dynamically assigns an IP address to the family...
Network & Sharing
Static IP addresses on multiple adapters simultaneously
I want to use a static IP address on my Local Area Connection adapter and my Wireless adapter at the same time, cause I switch between the two often, but I'm having a problem. I know how to set up a static IP address, it's set up and working on my Local Area Connection adapter. These are my...
Network & Sharing
Sound Static Help (removes most static)
Stumbled upon this trying to fix my static and it helped it out a bit, not 100% though but thought i would share it. Anyways; goto your playback devices > click your speaker properties > advanced > and change the default format to a higher setting, such as 24 bit, 48000hz (studio quality) ...
Sound & Audio


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 11:11.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App