|View Poll Results: What Types of cable have you used?|
|Multiple Choice Poll. Voters: 41. You may not vote on this poll|
|21 Mar 2014||#1|
Understanding "Cat" meaning when using Ethernet Cable.
(pinched that photo from the web)
It is commonly known as Cat 3 or Station Wire. It is used for voice cabling and 10 Mbps Ethernet with a possible bandwidth of 16MHz. Cat 3 is used in Telephone Wiring. It is used earlier in Computer Networking for 10BaseT Ethernet, Token Ring or ATM 25 Network.
It is also used in Telephone Network to transmit voice and date at 16 Mbit/s. It is used in Computer Networking for some Token Ring, 10BaseT and 100BaseT4 Ethernet.
It is currently an out-dated standard that provides support for up to 100Mhz operation. It can be used for 10/100 Ethernet without worry, however for longer runs of 1000 Mbps it is recommended to use Cat 5e or higher. It is suitable for 10BaseT, 100BaseTX(Fast Ethernet) and 1000BaseT \(Gigabit Ethernet).
It is an enhanced version Cat 5 cabling that helps to prevent cross-talk. Category 5e cable provides support for frequencies up to 100Mhz. Cat 5e generally provides the best price for performance, however for future proofing Cat 6 or higher might be a better choice as it usually does not cost much more.
Like Cat 5e but with larger gauge wires, works for 10/100/1000 Mbps. This cable is better than Cat 5e for Gigabit Ethernet. Compared with Cat 5 and Cat 5e, Cat 6 features more stringent specifications for crosstalk and system noise. The cable standard provides performance of up to 250 MHz and is suitable for 10BaseT, 100BaseTX (Fast Ethernet), 1000BaseT/1000BaseTX (Gigabit Ethernet) and 10GBaseT (10-Gigabit Ethernet).
If Cat 6 rated patch cables, jacks and connectors are not used with Cat 6 wiring; overall performance is degraded to that of the cable or connector.
When used for 10/100/1000BaseT, the maximum allowed length of a Cat 6 cable is 100 meters or 328 feet.
When used for 10GBaseT, Cat 6 cable's maximum length is 55 meters (180 ft) in a favourable alien crosstalk environment, but only 37 meters (121 ft) in a hostile alien crosstalk environment.
Category 6a (or Augmented Category 6) worked at frequencies up to 500 MHz twice that of Cat 6. Category 6a performs at improved specifications, in particular in the area of alien crosstalk as compared to Cat 6 UTP (unshielded twisted pair), which exhibited high alien noise in high frequencies. When used for 10GBaseT, the maximum allowed length of Cat 6a cable is 100 meters ( or 330 feet) without electronic testing.
Category 7 is the informal name for Class F cabling defined by a different standards body than Cat 6a and lower. It supports frequencies up to 600Mhz and may support the upcoming 100Gbps standard. It is fully shielded cable.
Here is an example of Shielded (STP) and unshilded (UTP) Ethernet cable.
Because all Ethernet cables are twisted, manufactures use shielding to further protect the cable from interference. Unshielded twisted pair can easily be used for cables between your computer and the wall, but you will want to use shielded cable for areas with high interference and running cables outdoors or inside walls.
|My System Specs|
|Similar help and support threads|
Need to add "TASKBARS" (MSese for "Launchpads", "Docks" NOT "Toolbars"
My office just upgraded, and I can no longer use Windows XP. On this system, I was able to add a separate taskbar to facilitate quick access to commonly-browsed folder locations on our vast network, and another one expedited the launching of useful programs and lists. Each task on each taskbar...
No ethernet in "Network Conncetions" + no keyboard at desktop & bios
Hi guys! First off, this is my first message on this forum so thanks for having me. Second, the problem: there are three issues which might be linked to a same bigger issue so I combined all three here - I have no local area network in my "network connections" located in the control panel. I...
Inserting Ethernet Cord Does Not "Automatically" switch connection....
Inserting Ethernet Cord Does Not "Automatically" switch connection to ethernet. This is the trouble I have to go through whenever I insert my ethernet cord: I have to go to network and sharing center Then I have to click change adapter settings Finally, I have to disable wireless...
|Network & Sharing|
Connecting "HD audio" cable from front panel to sound card
My sound card Xonar D1 doesn't work properly and i wrote to ASUS and they told me to connect the "HD audio" or "speaker" cables from the front panel of motherboard to the sound card's front panel. Is that safe to do? weather it will work or not, is it safe to try?
|Sound & Audio|
Marvell Yukon 88E8040 LAN Connection states "Cable Unplugged"
Dear Experts, I have the same issue as mentioned in the following thread, but none of the solutions working for me. http://www.sevenforums.com/network-sharing/143603-plugged-ethernet-cable-not-detected.html I had this problem before in windows xp long back and the dry reboot worked This...
|Network & Sharing|
Common problem, "cable unplugged" error windows 7
Hello dear community Now i've tried to fix this error myself for countless of days, this quite common problem. The error is following: My computer now and then doesnt recognize that i've got a ethernet cable plugged in to my computer. The internet work all times on all of the other 3...
|Network & Sharing|
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.
© Designer Media Ltd
All times are GMT -5. The time now is 21:46.