New
#1
Remote Desktop from workgroup computer to domain computer
I am having trouble establishing how to make a remote desktop connection using RDP from my home computer which is on a workgroup to my work laptop which is on a domain. I work from home occasionally and would like to be able to use RDP in order to use my keyboard mouse and monitor without buying a KVM switch. I am able to establish a remote desktop connection FROM my domain (work) laptop TO my workgroup (home) PC, but not vice versa, i.e. FROM workgroup TO domain computer.
I have searched online and found information about going from domain to workgroup, but not the other way around. Most online information was focused on IT professional server management that I am not completely familiar with such as active directory etc...
I have checked My Computer > Properties > Advanced system settings > System Properties > Remote tab on both computers. Both computers are set to allow connections from any version of Remote Desktop. I ran network connection statistics cmd "netstat -a" and both computers show listening state for port 3389. I ran remote desktop query session cmd "qwinsta" which lists rdp-tcp.
After going to Control Panel > Network and Sharing Center > see full map > Network Map, I am able to see both computers on the network from either machine. Under Control Panel > Windows Firewall > Allowed Programs, for the workgroup computer Remote Desktop is allowed for home networks, and for the domain computer Remote Desktop is allowed for domain networks and home networks.
When I try to connect to the domain computer from the workgroup computer using Remote Desktop Connection, if I enter in the IP address of the domain computer, Remote Desktop says that it can't connect to the remote computer for one of these reasons:
1) Remote access to the server is not enabled
2) The remote computer is turned off
3) The remote computer is not available on the network
If I enter in the name of the domain computer, Remote Desktop says that it can't find the computer.
I have tried pinging the IP address of the domain computer using cmd "ping 192.168.2.6" and the request timed out. I have also turned on the Telnet Client under Windows Features and tried the cmd "telnet 192.168.2.6 3389" and the connect failed and could not open connection to the host.
I am not sure if the following information is relevant since I am not trying to go outside my home network but I will include it anyway. I am using OpenDNS domain name system filtering. I have an ASUS RT-AC66U router that has the WAN DNS settings to use the OpenDNS DNS servers 208.67.220.220 and 208.67.222.222 and made sure that the LAN DNS server setting is blank. I have AT&T U-verse that uses a 2WIRE 3600HGV gateway that I have set to use DMZPlus mode so that all inbound traffic goes to my router. After my router I have a Cisco switch that everything is connected to.
I ran the internet protocol config cmd "ipconfig /all" on both machines. Both state that DHCP is enabled and auto-configuration is enabled. Both list the same Default Gateway, DHCP Server, and DNS Server IP address of 192.168.2.1 (which is the IP address of my router). Both show that NetBIOS over TCP/IP is enabled. The main difference I saw was that the domain machine has a primary DNS suffix and DNS suffix search list entries.
I went to Control Panel > Network and Sharing Center > Advanced sharing settings on both machines and made sure that the settings were the same. Network discovery is on, file and printer sharing is on, public folder sharing is on, media streaming is off, file sharing connections use 128-bit encryption, password protected sharing is on, and uses user accounts and passwords to connect to other computers. My home workgroup computer user account has a password.
I read somewhere that I might be able to get it to work if I created a local user account on my domain computer, although that kind of defeats the purpose since all of my settings would be different, and am not sure if that would even work. Is it even possible for my home computer to establish a RDP session with my work domain laptop since it is not in the active directory and does not have the correct security identifier? Since I am not an IT professional and don't have access to any group policy settings, I am not sure if what I am asking is even feasible.
Any help or clarification would be appreciated. Thanks.