Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: HELP! Educate me on loading my printer with a Static I.P.

07 Aug 2014   #1
catapultit

windows 7 professional 64 bit
 
 
HELP! Educate me on loading my printer with a Static I.P.

Administrators-

My name is David and i am the I.T. administrator for Catapult Learning in Jacksonville. We have 7 facilities here in jacksonville that all operate independantly as far as the network is concerned. (no server)

We run Comcast buisness class routers (cg3000dcr) with a Asus wireless router (rt-n12). Everyone in the facility runs LAN except for a few staff members that operate wireless and bounce from facility to facility, as well as any visitors.

Previously we had ATT NG512 routers and we had the printers setup at each facility running the same static ip address...192.168.1.131

Please tell me how i can get this setup back...it doesnt have to be the old static but all printers need to have the same static.




Attached Images
HELP! Educate me on loading my printer with a Static I.P.-capture.png 
My System SpecsSystem Spec
.
08 Aug 2014   #2
UKMedia

Windows 7 Ultimate 64Bit (SP 1)
 
 

Hi

If the facilites are not network connected, you'll have a individual DCHP device within each facility? Can you not set each printer to the same static IP address within each DCHP router setup? If this isn't an option, can you tell me what printers you are using?

Regards
UKMedia
My System SpecsSystem Spec
08 Aug 2014   #3
catapultit

windows 7 professional 64 bit
 
 

we are using Muratec mfx 2350's...

can you educate me on where to go to test the setup in the router. I believe the statics i posted
are public statics addressed by comcast but ive been told that i should just use a private static.
My System SpecsSystem Spec
.

08 Aug 2014   #4
UKMedia

Windows 7 Ultimate 64Bit (SP 1)
 
 

You have two options either set a static IP Address on each printer - See section 1-11 in http://www.muratec.com/downloads/man...cuserguide.pdf (Make sure it is out of the allocatable IP address range in your router - if it worked before I expect that this is the case.)

Or in each router - Can you confirm your router model again, I can't find any user guide.

Sorry here it is: ftp://downloads.netgear.com/pub/netg...-14MAY2013.pdf please look on page 44.

Regards
UkMedia
My System SpecsSystem Spec
Reply

 HELP! Educate me on loading my printer with a Static I.P.




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Can somone educate me about eSATA?
This subject is new to me and it looks like I goofed. I bought an external hard drive enclosure which is set up for eSATA and I didn't have anything on my computer to accept the cable. So--I ordered a couple of brackets to accept the cable. The brackets came today and guess what? The bracket...
Hardware & Devices
Static IP Address to Printer
This isn't a question about a printer sitting somewhere in the house. During tax season we go to the local library to do free tax preparation. We use an online program. We plug in our Ethernet cable to the library's system and each laptop has a static IP to identify it to the network. What...
Hardware & Devices
How to set static ip address in printer
Hi friends In my office more then 150 peoples working . my question is i set ip address of the printer 220 but now it's changed for 203. please tel me how can set ip address static and product the printer. i hope my friends help me. thanks Regard Nazeem rahaman
Network & Sharing
Can anyone help me further educate myself on analyzing DMP files?
Hey guys. I am very intrigued by dump files, and I have always wanted to learn how to successfully read and analyze them. With the help of your great guides in the Crash & Debugging forum, I have learned how to do most if not all of the basics as far as analyzing dump files in WinDbg goes. Now that...
General Discussion
Printer. Can I set up a static IP address ?
I have a Belkin router with the PC plugged into port 1 and my Konica Minolta 2430DL plugged into port 2. The problem I have is that whenever the router restarts (power cut/switch off etc) the router reasigns a different IP to the printer. This means I have to go into printer properties and add a...
Hardware & Devices
Sound Static Help (removes most static)
Stumbled upon this trying to fix my static and it helped it out a bit, not 100% though but thought i would share it. Anyways; goto your playback devices > click your speaker properties > advanced > and change the default format to a higher setting, such as 24 bit, 48000hz (studio quality) ...
Sound & Audio


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 01:24.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App