Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: After install SSD no Networkaccess


08 Aug 2014   #1

Win7 64 prof
 
 
After install SSD no Networkaccess

  • Acer AX3400 - Windows 7 64bit Prof
    • Onboard Networkcard (driver from Nvidia Chipset)
  • Router with DHCP and Modem for Internet
Since I changed the Harddisk to a SSD I have Problems with geting a IP / Internetaccess.
I make a mirrow of the System from HD to SSD

If I start the PC and log in the NetworkIcon the arrow turns and didn't find NetworkAccess.
If I deactivate and activate Networkcard it works fine.
After a restart most of the Time Network works fine again.


Info: In my private Network I have some Windows 7 PC no Problems
The PC works 2 Year without problems
I try a fix IP - no improvement
I install Windows 7 new - no improvement
Also try a other Router with DHCP - same problems; but in case that all other Windows 7 PC doesn't have any Problems this isn't the fault

I din't find a newer (Chipset)driver


My System SpecsSystem Spec
.

08 Aug 2014   #2

Desk1 8 Pro / Desk2 7 Home Prem / Laptop 8.1 Pro all 64bit
 
 

Hello and welcome miraculix mate by mirroring the hard drive to the SD I take it you mean clone?
If so you shouldn't have a problem so can you confirm this please?
The first thing that comes to mind is the cloning if that is what you did has been corrupted somehow.
My System SpecsSystem Spec
08 Aug 2014   #3

Win7 64 prof
 
 

I clone the System from HDD to SSD; Yes it might seem that this is the reason. But why only after start ? And why also on the new installed System.

I have the old and also the actual System as an Image and I'm almost sure that It works fine If I clone it back to a HDD
My System SpecsSystem Spec
.


11 Aug 2014   #4

Win7 64 prof
 
 

I installed a second Networkcard and now both work fine.

everything would be fine, BUT now the PC Fan spin like a turbine if I start the PC for about 5 seconds (If i remove Networkcard - everything is OK again)
My System SpecsSystem Spec
11 Aug 2014   #5

Desk1 8 Pro / Desk2 7 Home Prem / Laptop 8.1 Pro all 64bit
 
 

Hum mate something is trying to cook the CPU by the sounds of it and I am wondering if that second card has something wrong with.
Just what are the temps when that happens?
My System SpecsSystem Spec
12 Aug 2014   #6

Win7 64 prof
 
 

The Fan turns up after BIOS - before Windows 7 Logo appears, the Temperature in BIOS is normal.
My System SpecsSystem Spec
12 Aug 2014   #7

Desk1 8 Pro / Desk2 7 Home Prem / Laptop 8.1 Pro all 64bit
 
 

Just as aback up of the BIOS readings can you run Speccy and let us know what it reports for the temps because that CPU fan is controlled by the heat given of by the CPU. Speccy - Download
My System SpecsSystem Spec
12 Aug 2014   #8

Windows 7 Pro. 64/SP-1
 
 

On a boot the cpu cooler will run fast. Once the sensor has been recognized
the fan should slow down if it using a 4 pin fan connector from the motherboard. It normally takes around 5 to 10 sec.
It varies from motherboard to motherboard and it's bios and sensors.
My System SpecsSystem Spec
Reply

 After install SSD no Networkaccess




Thread Tools




Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 04:58 AM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33