Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: VPN connection between EC2 instance and router from another subnet

13 Sep 2014   #1
vaarsn

Windows 7 Ultimate x64
 
 
VPN connection between EC2 instance and router from another subnet

Hi, We have a problem wile connecting to EC2 instance with Wi-Fi router. I had connected my office router to the EC2 instance via PPTP protocol. Everything is fine and my router's WAN interface got IP address 192.168.90.9 from Windows 2008R2 static pool which I set in RRAS configuration. I can reach all Server's resources from my clinet's workstations (my private home network has 192.168.1.0 network), but not vice versa. So I added static route on the server side "route add 192.168.1.0 mask 255.255.255.0 192.168.90.9". But I can't still reach any client in office network (e.g. 192.168.1.33). If I connect to EC2 instance directly (not via my router's PPTP) then I'm getting e.g. 192.168.90.6 from Windows 2008R2 static pool and I can reach recources in both directions. Please help me to set an appropriate configuration to reach all resources in boith directions. Please note I had disabled NAT on the router.


My System SpecsSystem Spec
.
14 Sep 2014   #2
vaarsn

Windows 7 Ultimate x64
 
 

Any thoughts regarding to my issue?
My System SpecsSystem Spec
Reply

 VPN connection between EC2 instance and router from another subnet




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
No/poor connection to Router
Hello, so... I made the mistake and had my heat sink cleaned by 'professionals'. I had to bring it back again, b/c I couldn't play any games after they had done that, now I really don't wanna bring it back a third time, b/c when I brought it home yesterday I was unable to connect to the internet. ...
Network & Sharing
Router on different subnet to network - worried?
Hi all, Quick question, I'm just wondering what are the complications of doing this? We have our network on the Subnet 255.255.255.0. Address from 10.0.0.1 - 10.0.0.254.. I have set up a router, and this gives out IP addresses from 192.168.2.1 to whatever with subnet 255.255.255.0....
Network & Sharing
How to set up connection to wireless router
Hi I would appreciate some help setting up an Internet connection via my Netgear DGND3700 wireless router please. Background: I have just replaced my laptop's HDD and installed Win7 Home Premium 32bit from an OEM disk that was purchased from Amazon. The installation went fine and now I want...
Network & Sharing
router connection drops?
how come on my ehome 100 1.0 router my connection suddenly drops then reconnects
Network & Sharing
router connection not possible
Hi there. Every so often I cannot connect to my router, which is a Belkin I can ping it all right, and I can go on the internet; but when I enter the ip address, there is an error message about no connection. What I have done in the past is to turn off the router and back on. Then bingo! Any...
Network & Sharing
Router Keeps Dropping Connection
Hey Guys Ok, so here is the problem I have 3 computers in the house 2 are laptops (connect wirelessy) one running windows 7 and another a desktop running windows 7 (wired to router). My ISP is O2, they provided me with a router which worked ok but i wanted to use my Netgear DG834G, i managed...
Network & Sharing


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 22:29.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App